Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756115AbdDERBy (ORCPT ); Wed, 5 Apr 2017 13:01:54 -0400 Received: from mx1.redhat.com ([209.132.183.28]:58282 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755767AbdDERBj (ORCPT ); Wed, 5 Apr 2017 13:01:39 -0400 DMARC-Filter: OpenDMARC Filter v1.3.2 mx1.redhat.com C63322174D Authentication-Results: ext-mx04.extmail.prod.ext.phx2.redhat.com; dmarc=none (p=none dis=none) header.from=redhat.com Authentication-Results: ext-mx04.extmail.prod.ext.phx2.redhat.com; spf=pass smtp.mailfrom=dhowells@redhat.com DKIM-Filter: OpenDKIM Filter v2.11.0 mx1.redhat.com C63322174D Organization: Red Hat UK Ltd. Registered Address: Red Hat UK Ltd, Amberley Place, 107-111 Peascod Street, Windsor, Berkshire, SI4 1TE, United Kingdom. Registered in England and Wales under Company Registration No. 3798903 Subject: [PATCH 32/38] Annotate hardware config module parameters in drivers/video/ From: David Howells To: linux-kernel@vger.kernel.org Cc: gnomes@lxorguk.ukuu.org.uk, linux-fbdev@vger.kernel.org, gregkh@linuxfoundation.org, dhowells@redhat.com, linux-security-module@vger.kernel.org, Tomi Valkeinen , keyrings@vger.kernel.org, Jaya Kumar Date: Wed, 05 Apr 2017 18:01:34 +0100 Message-ID: <149141169417.29162.14993661679501972758.stgit@warthog.procyon.org.uk> In-Reply-To: <149141141298.29162.5612793122429261720.stgit@warthog.procyon.org.uk> References: <149141141298.29162.5612793122429261720.stgit@warthog.procyon.org.uk> User-Agent: StGit/0.17.1-dirty MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.16 (mx1.redhat.com [10.5.110.28]); Wed, 05 Apr 2017 17:01:39 +0000 (UTC) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3520 Lines: 76 When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/video/. Suggested-by: Alan Cox Signed-off-by: David Howells cc: Jaya Kumar cc: Tomi Valkeinen cc: linux-fbdev@vger.kernel.org --- drivers/video/fbdev/arcfb.c | 8 ++++---- drivers/video/fbdev/n411.c | 6 +++--- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/video/fbdev/arcfb.c b/drivers/video/fbdev/arcfb.c index 1928cb2b5386..7e87d0d61658 100644 --- a/drivers/video/fbdev/arcfb.c +++ b/drivers/video/fbdev/arcfb.c @@ -645,17 +645,17 @@ module_param(nosplash, uint, 0); MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); module_param(arcfb_enable, uint, 0); MODULE_PARM_DESC(arcfb_enable, "Enable communication with Arc board"); -module_param(dio_addr, ulong, 0); +module_param_hw(dio_addr, ulong, ioport, 0); MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); -module_param(cio_addr, ulong, 0); +module_param_hw(cio_addr, ulong, ioport, 0); MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); -module_param(c2io_addr, ulong, 0); +module_param_hw(c2io_addr, ulong, ioport, 0); MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); module_param(splashval, ulong, 0); MODULE_PARM_DESC(splashval, "Splash pattern: 0xFF is black, 0x00 is green"); module_param(tuhold, ulong, 0); MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Arc board"); -module_param(irq, uint, 0); +module_param_hw(irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ for the Arc board"); module_init(arcfb_init); diff --git a/drivers/video/fbdev/n411.c b/drivers/video/fbdev/n411.c index 053deacad7cc..a3677313396e 100644 --- a/drivers/video/fbdev/n411.c +++ b/drivers/video/fbdev/n411.c @@ -193,11 +193,11 @@ module_exit(n411_exit); module_param(nosplash, uint, 0); MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); -module_param(dio_addr, ulong, 0); +module_param_hw(dio_addr, ulong, ioport, 0); MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); -module_param(cio_addr, ulong, 0); +module_param_hw(cio_addr, ulong, ioport, 0); MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); -module_param(c2io_addr, ulong, 0); +module_param_hw(c2io_addr, ulong, ioport, 0); MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); module_param(splashval, ulong, 0); MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white");