Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756291AbdDEW7N (ORCPT ); Wed, 5 Apr 2017 18:59:13 -0400 Received: from mga02.intel.com ([134.134.136.20]:36269 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756075AbdDEW6e (ORCPT ); Wed, 5 Apr 2017 18:58:34 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.37,281,1488873600"; d="scan'208";a="74107552" From: Kuppuswamy Sathyanarayanan To: andy@infradead.org, qipeng.zha@intel.com, dvhart@infradead.org, linux@roeck-us.net Cc: wim@iguana.be, sathyaosid@gmail.com, david.e.box@linux.intel.com, rajneesh.bhardwaj@intel.com, sathyanarayanan.kuppuswamy@linux.intel.com, platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org Subject: [PATCH v6 6/6] platform/x86: intel_pmc_ipc: use gcr mem base for S0ix counter read Date: Wed, 5 Apr 2017 15:54:24 -0700 Message-Id: X-Mailer: git-send-email 2.7.4 In-Reply-To: <3e7ca77c-2be5-5f89-f51f-faaca9f2d9ac@linux.intel.com> References: <3e7ca77c-2be5-5f89-f51f-faaca9f2d9ac@linux.intel.com> In-Reply-To: <463a23bb1f44098dd0fe506346bae71282009e05.1491428146.git.sathyanarayanan.kuppuswamy@linux.intel.com> References: <463a23bb1f44098dd0fe506346bae71282009e05.1491428146.git.sathyanarayanan.kuppuswamy@linux.intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2094 Lines: 62 To maintain the uniformity in accessing GCR registers, this patch modifies the S0ix counter read function to use GCR address base instead of ipc address base. Signed-off-by: Kuppuswamy Sathyanarayanan Reviewed-by: Rajneesh Bhardwaj Tested-by: Shanth Murthy --- arch/x86/include/asm/intel_pmc_ipc.h | 2 ++ drivers/platform/x86/intel_pmc_ipc.c | 10 +++------- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h index 8402efe..fac89eb 100644 --- a/arch/x86/include/asm/intel_pmc_ipc.h +++ b/arch/x86/include/asm/intel_pmc_ipc.h @@ -25,6 +25,8 @@ /* GCR reg offsets from gcr base*/ #define PMC_GCR_PMC_CFG_REG 0x08 +#define PMC_GCR_TELEM_DEEP_S0IX_REG 0x78 +#define PMC_GCR_TELEM_SHLW_S0IX_REG 0x80 #if IS_ENABLED(CONFIG_INTEL_PMC_IPC) diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c index 173940f..3c9de18 100644 --- a/drivers/platform/x86/intel_pmc_ipc.c +++ b/drivers/platform/x86/intel_pmc_ipc.c @@ -57,10 +57,6 @@ #define IPC_WRITE_BUFFER 0x80 #define IPC_READ_BUFFER 0x90 -/* PMC Global Control Registers */ -#define GCR_TELEM_DEEP_S0IX_OFFSET 0x1078 -#define GCR_TELEM_SHLW_S0IX_OFFSET 0x1080 - /* Residency with clock rate at 19.2MHz to usecs */ #define S0IX_RESIDENCY_IN_USECS(d, s) \ ({ \ @@ -202,7 +198,7 @@ static inline u32 ipc_data_readl(u32 offset) static inline u64 gcr_data_readq(u32 offset) { - return readq(ipcdev.ipc_base + offset); + return readq(ipcdev.gcr_mem_base + offset); } static inline int is_gcr_valid(u32 offset) @@ -906,8 +902,8 @@ int intel_pmc_s0ix_counter_read(u64 *data) if (!ipcdev.has_gcr_regs) return -EACCES; - deep = gcr_data_readq(GCR_TELEM_DEEP_S0IX_OFFSET); - shlw = gcr_data_readq(GCR_TELEM_SHLW_S0IX_OFFSET); + deep = gcr_data_readq(PMC_GCR_TELEM_DEEP_S0IX_REG); + shlw = gcr_data_readq(PMC_GCR_TELEM_SHLW_S0IX_REG); *data = S0IX_RESIDENCY_IN_USECS(deep, shlw); -- 2.7.4