Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933955AbdDGObc (ORCPT ); Fri, 7 Apr 2017 10:31:32 -0400 Received: from bes.se.axis.com ([195.60.68.10]:40013 "EHLO bes.se.axis.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756309AbdDGOb0 (ORCPT ); Fri, 7 Apr 2017 10:31:26 -0400 From: Niklas Cassel To: Rob Herring , Mark Rutland , "David S. Miller" , Joao Pinto , Alexandre TORGUE , Niklas Cassel , Giuseppe CAVALLARO , Thierry Reding , Eric Engestrom CC: Niklas Cassel , , , Subject: [PATCH net-next] bindings: net: stmmac: add missing note about LPI interrupt Date: Fri, 7 Apr 2017 16:30:58 +0200 Message-ID: <20170407143100.21536-1-niklass@axis.com> X-Mailer: git-send-email 2.11.0 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.0.5.60] X-ClientProxiedBy: XBOX02.axis.com (10.0.5.16) To XBOX02.axis.com (10.0.5.16) X-TM-AS-GCONF: 00 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1668 Lines: 39 From: Niklas Cassel The hardware has a LPI interrupt. There is already code in the stmmac driver to parse and handle the interrupt. However, this information was missing from the DT binding. Signed-off-by: Niklas Cassel --- Documentation/devicetree/bindings/net/stmmac.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index f652b0c384ce..8977abc266ac 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -8,8 +8,8 @@ Required properties: that services interrupts for this device - interrupts: Should contain the STMMAC interrupts - interrupt-names: Should contain the interrupt names "macirq" - "eth_wake_irq" if this interrupt is supported in the "interrupts" - property + "eth_wake_irq" if this interrupt is supported in the "interrupts property + "eth_lpi" if this interrupt is supported in the "interrupts" property - phy-mode: See ethernet.txt file in the same directory. - snps,reset-gpio gpio number for phy reset. - snps,reset-active-low boolean flag to indicate if phy reset is active low. @@ -152,8 +152,8 @@ Examples: compatible = "st,spear600-gmac"; reg = <0xe0800000 0x8000>; interrupt-parent = <&vic1>; - interrupts = <24 23>; - interrupt-names = "macirq", "eth_wake_irq"; + interrupts = <24 23 22>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; mac-address = [000000000000]; /* Filled in by U-Boot */ max-frame-size = <3800>; phy-mode = "gmii"; -- 2.11.0