Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264436AbTEaUh2 (ORCPT ); Sat, 31 May 2003 16:37:28 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264442AbTEaUh2 (ORCPT ); Sat, 31 May 2003 16:37:28 -0400 Received: from camus.xss.co.at ([194.152.162.19]:48140 "EHLO camus.xss.co.at") by vger.kernel.org with ESMTP id S264436AbTEaUhJ (ORCPT ); Sat, 31 May 2003 16:37:09 -0400 Message-ID: <3ED9158E.2080904@xss.co.at> Date: Sat, 31 May 2003 22:50:22 +0200 From: Andreas Haumer Organization: xS+S User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.3) Gecko/20030312 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Alan Cox CC: linux-kernel@vger.kernel.org Subject: Re: Linux 2.4.21rc6-ac1 References: <200305311153.h4VBrNi21640@devserv.devel.redhat.com> In-Reply-To: <200305311153.h4VBrNi21640@devserv.devel.redhat.com> X-Enigmail-Version: 0.74.0.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: multipart/mixed; boundary="------------010009080108000007030409" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. --------------010009080108000007030409 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi! Alan Cox wrote: > Linux 2.4.21rc6-ac1 [...] > o Update ACPI to next Intel release (Bernhard Rosenkraenzer) [...] There seem to be some problems with this: 1.) drivers/hotplug/acpiphp_glue.c doesn't compile I made the following patch to make it compile again. I hope it is ok, please check (I don't have any PCI hotplug device, so I can't test it myself). --- acpiphp_glue.c.orig Sat May 31 20:24:42 2003 +++ acpiphp_glue.c Sat May 31 20:38:26 2003 @@ -807,27 +807,33 @@ find_host_bridge (acpi_handle handle, u32 lvl, void *context, void **rv) { acpi_status status; - struct acpi_device_info info; + struct acpi_device_info *info; char objname[5]; - struct acpi_buffer buffer = { .length = sizeof(objname), - .pointer = objname }; + struct acpi_buffer buffer; - status = acpi_get_object_info(handle, &info); + buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; + buffer.pointer = NULL; + status = acpi_get_object_info(handle, &buffer); if (ACPI_FAILURE(status)) { dbg("%s: failed to get bridge information\n", __FUNCTION__); return AE_OK; /* continue */ } - info.hardware_id[sizeof(info.hardware_id)-1] = '\0'; + info = buffer.pointer; + info->hardware_id.value[sizeof(info->hardware_id.value)-1] = '\0'; /* TBD use acpi_get_devices() API */ - if (info.current_status && - (info.valid & ACPI_VALID_HID) && - strcmp(info.hardware_id, ACPI_PCI_HOST_HID) == 0) { + if (info->current_status && + (info->valid & ACPI_VALID_HID) && + strcmp(info->hardware_id.value, ACPI_PCI_HOST_HID) == 0) { + buffer.length = sizeof(objname); + buffer.pointer = objname; acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer); dbg("checking PCI-hotplug capable bridges under [%s]\n", objname); add_bridges(handle); } + ACPI_MEM_FREE (info); + return AE_OK; } 2.) ACPI itself doesn't work right anymore and makes the system unusable... :-( It did work with the last AC kernel I tried (2.4.21-rc2-ac2) Symptoms are: No ethernet, NIC (Intel eepro100) doesn't get interrupts, ACPI interrupt "storm" (millions of IRQ in a few minutes) Booting with "acpi=off" makes the system work again, but without ACPI, of course. Here are a few more infos from the running system: Asus P4B motherboard, P4 1.6GHz processor, 1.2GB RAM root@install:~ {502} $ uname -a Linux install 2.4.21-rc6-ac1 #1 SMP Sat May 31 20:04:18 CEST 2003 i686 unknown root@install:~ {503} $ uptime 10:17pm up 5 min, 2 users, load average: 0.02, 0.13, 0.07 root@install:~ {504} $ lspci -v 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03) Subsystem: Asustek Computer, Inc.: Unknown device 8070 Flags: bus master, fast devsel, latency 0 Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [0104] Capabilities: [a0] AGP version 2.0 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: f2000000-f35fffff Prefetchable memory behind bridge: f3700000-f7ffffff 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 12) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f1000000-f1ffffff Prefetchable memory behind bridge: f3600000-f36fffff 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80 [Master]) Subsystem: Asustek Computer, Inc.: Unknown device 8028 Flags: bus master, medium devsel, latency 0 I/O ports at b800 [size=16] 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8028 Flags: bus master, medium devsel, latency 0, IRQ 5 I/O ports at b400 [size=32] 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8028 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at b000 [size=32] 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12) Subsystem: Asustek Computer, Inc.: Unknown device 8072 Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at a800 [size=256] I/O ports at a400 [size=64] 01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4200] (rev a3) (prog-if 00 [VGA]) Subsystem: Asustek Computer, Inc.: Unknown device 8047 Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11 Memory at f2000000 (32-bit, non-prefetchable) [size=16M] Memory at f4000000 (32-bit, prefetchable) [size=64M] Memory at f3800000 (32-bit, prefetchable) [size=512K] Expansion ROM at f37e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [44] AGP version 2.0 02:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter with Alert On LAN* Flags: bus master, medium devsel, latency 32, IRQ 9 Memory at f1800000 (32-bit, non-prefetchable) [size=4K] I/O ports at d800 [size=64] Memory at f1000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at [disabled] [size=1M] Capabilities: [dc] Power Management version 2 root@install:~ {505} $ lsmod Module Size Used by Tainted: P i810_audio 23944 0 (autoclean) soundcore 3972 2 (autoclean) [i810_audio] ac97_codec 10920 0 (autoclean) [i810_audio] nfsd 67696 8 (autoclean) nfs 69784 7 (autoclean) lockd 47984 1 (autoclean) [nfsd nfs] sunrpc 65596 1 (autoclean) [nfsd nfs lockd] af_packet 13256 2 (autoclean) slip 9056 4 (autoclean) slhc 4608 2 (autoclean) [slip] eepro100 18516 1 (autoclean) mii 2464 0 (autoclean) [eepro100] softdog 1692 1 (autoclean) quota_v1 1848 10 nvidia 1546816 10 keybdev 1696 0 (unused) mousedev 3896 1 hid 18308 0 (unused) usbmouse 1820 0 (unused) input 3552 0 [keybdev mousedev hid usbmouse] uhci 24816 0 (unused) usbcore 59488 0 [hid usbmouse uhci] ext3 61924 4 (autoclean) jbd 40152 4 (autoclean) [ext3] ide-cd 28736 0 (autoclean) cdrom 27712 0 (autoclean) [ide-cd] unix 15880 104 (autoclean) ext2 34336 4 ide-disk 13344 9 piix 7680 1 root@install:~ {506} $ cat /proc/interrupts CPU0 0: 38742 XT-PIC timer 1: 422 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 2829 XT-PIC usb-uhci 9: 2997 XT-PIC usb-uhci, eth0 10: 6582 XT-PIC Intel ICH2 11: 25148 XT-PIC nvidia 12: 9 XT-PIC PS/2 Mouse 14: 22010 XT-PIC ide0 15: 33 XT-PIC ide1 NMI: 0 LOC: 38686 ERR: 0 MIS: 0 (Please find output of "dmesg" in attached file "dmesg-2.4.21-rc6-ac1-acpioff") And here's the interrupt configuration from the same kernel, but with ACPI enabled, after about 3 minutes of uptime: CPU0 0: 18132 IO-APIC-edge timer 1: 470 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 9: 1 IO-APIC-edge eth0 14: 17434 IO-APIC-edge ide0 15: 34 IO-APIC-edge ide1 19: 24 IO-APIC-level usb-uhci 22: 7378056 IO-APIC-level acpi 23: 0 IO-APIC-level usb-uhci NMI: 0 LOC: 18068 ERR: 0 MIS: 0 (dmesg output in attachment "dmesg-2.4.21-rc6-ac1-acpi") Just for reference, here's some (IMHO) relevant information from 2.4.21-rc2-ac2 on the same hardware: [...] May 16 18:52:37 install kernel: ENABLING IO-APIC IRQs May 16 18:52:37 install kernel: init IO_APIC IRQs May 16 18:52:37 install kernel: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected. May 16 18:52:37 install kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 May 16 18:52:37 install kernel: number of MP IRQ sources: 17. May 16 18:52:37 install kernel: number of IO-APIC #2 registers: 24. May 16 18:52:37 install kernel: testing the IO APIC....................... May 16 18:52:37 install kernel: May 16 18:52:37 install kernel: IO APIC #2...... May 16 18:52:37 install kernel: .... register #00: 02000000 May 16 18:52:37 install kernel: ....... : physical APIC id: 02 May 16 18:52:37 install kernel: ....... : Delivery Type: 0 May 16 18:52:37 install kernel: ....... : LTS : 0 May 16 18:52:37 install kernel: .... register #01: 00178020 May 16 18:52:37 install kernel: ....... : max redirection entries: 0017 May 16 18:52:37 install kernel: ....... : PRQ implemented: 1 May 16 18:52:37 install kernel: ....... : IO APIC version: 0020 May 16 18:52:37 install kernel: .... register #02: 00000000 May 16 18:52:37 install kernel: ....... : arbitration: 00 May 16 18:52:37 install kernel: .... IRQ redirection table: May 16 18:52:37 install kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: May 16 18:52:37 install kernel: 00 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: 01 0FF 0F 0 0 0 0 0 1 1 39 May 16 18:52:37 install kernel: 02 001 01 0 0 0 0 0 1 1 31 May 16 18:52:37 install kernel: 03 0FF 0F 0 0 0 0 0 1 1 41 May 16 18:52:37 install kernel: 04 0FF 0F 0 0 0 0 0 1 1 49 May 16 18:52:37 install kernel: 05 0FF 0F 0 0 0 0 0 1 1 51 May 16 18:52:37 install kernel: 06 0FF 0F 0 0 0 0 0 1 1 59 May 16 18:52:37 install kernel: 07 0FF 0F 0 0 0 0 0 1 1 61 May 16 18:52:37 install kernel: 08 0FF 0F 0 0 0 0 0 1 1 69 May 16 18:52:37 install kernel: 09 0FF 0F 0 0 0 0 0 1 1 71 May 16 18:52:37 install kernel: 0a 0FF 0F 0 0 0 0 0 1 1 79 May 16 18:52:37 install kernel: 0b 0FF 0F 0 0 0 0 0 1 1 81 May 16 18:52:37 install kernel: 0c 0FF 0F 0 0 0 0 0 1 1 89 May 16 18:52:37 install kernel: 0d 0FF 0F 0 0 0 0 0 1 1 91 May 16 18:52:37 install kernel: 0e 0FF 0F 0 0 0 0 0 1 1 99 May 16 18:52:37 install kernel: 0f 0FF 0F 0 0 0 0 0 1 1 A1 May 16 18:52:37 install kernel: 10 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: 11 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: 12 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: 13 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: 14 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: 15 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: 16 0FF 0F 1 1 0 1 0 1 1 71 May 16 18:52:37 install kernel: 17 000 00 1 0 0 0 0 0 0 00 May 16 18:52:37 install kernel: IRQ to pin mappings: May 16 18:52:37 install kernel: IRQ0 -> 0:2 May 16 18:52:37 install kernel: IRQ1 -> 0:1 May 16 18:52:37 install kernel: IRQ3 -> 0:3 May 16 18:52:37 install kernel: IRQ4 -> 0:4 May 16 18:52:37 install kernel: IRQ5 -> 0:5 May 16 18:52:37 install kernel: IRQ6 -> 0:6 May 16 18:52:37 install kernel: IRQ7 -> 0:7 May 16 18:52:37 install kernel: IRQ8 -> 0:8 May 16 18:52:37 install kernel: IRQ9 -> 0:9-> 0:22 May 16 18:52:37 install kernel: IRQ10 -> 0:10 May 16 18:52:37 install kernel: IRQ11 -> 0:11 May 16 18:52:37 install kernel: IRQ12 -> 0:12 May 16 18:52:37 install kernel: IRQ13 -> 0:13 May 16 18:52:37 install kernel: IRQ14 -> 0:14 May 16 18:52:37 install kernel: IRQ15 -> 0:15 May 16 18:52:37 install kernel: .................................... done. May 16 18:52:37 install kernel: Using local APIC timer interrupts. May 16 18:52:37 install kernel: calibrating APIC timer ... May 16 18:52:37 install kernel: ..... CPU clock speed is 1614.4531 MHz. May 16 18:52:37 install kernel: ..... host bus clock speed is 100.9032 MHz. May 16 18:52:37 install kernel: cpu: 0, clocks: 1009032, slice: 504516 May 16 18:52:37 install kernel: CPU0 May 16 18:52:37 install kernel: migration_task 0 on cpu=0 May 16 18:52:37 install kernel: ACPI: Subsystem revision 20030424 May 16 18:52:37 install kernel: PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2 May 16 18:52:37 install kernel: PCI: Using configuration type 1 May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 22) May 16 18:52:37 install kernel: ACPI: Interpreter enabled May 16 18:52:37 install kernel: ACPI: Using IOAPIC for interrupt routing May 16 18:52:37 install kernel: ACPI: System [ACPI] (supports S0 S1 S4 S5) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) May 16 18:52:37 install kernel: ACPI: PCI Root Bridge [PCI0] (00:00) May 16 18:52:37 install kernel: PCI: Probing PCI hardware (bus 00) May 16 18:52:37 install kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge May 16 18:52:37 install kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] May 16 18:52:37 install kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] May 16 18:52:37 install kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] May 16 18:52:37 install kernel: PCI: Probing PCI hardware May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 May 16 18:52:37 install kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) May 16 18:52:37 install kernel: 00:00:1f[B] -> 2-17 -> IRQ 17 May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-23 -> 0xb9 -> IRQ 23) May 16 18:52:37 install kernel: 00:00:1f[C] -> 2-23 -> IRQ 23 May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) May 16 18:52:37 install kernel: 00:00:1f[D] -> 2-19 -> IRQ 19 May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc9 -> IRQ 16) May 16 18:52:37 install kernel: 00:01:00[A] -> 2-16 -> IRQ 16 May 16 18:52:37 install kernel: Pin 2-17 already programmed May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21) May 16 18:52:37 install kernel: 00:02:09[A] -> 2-21 -> IRQ 21 May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 22) May 16 18:52:37 install kernel: 00:02:09[B] -> 2-22 -> IRQ 22 May 16 18:52:37 install kernel: Pin 2-23 already programmed May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd9 -> IRQ 20) May 16 18:52:37 install kernel: 00:02:09[D] -> 2-20 -> IRQ 20 May 16 18:52:37 install kernel: Pin 2-22 already programmed May 16 18:52:37 install kernel: Pin 2-23 already programmed May 16 18:52:37 install kernel: Pin 2-20 already programmed May 16 18:52:37 install kernel: Pin 2-21 already programmed May 16 18:52:37 install kernel: Pin 2-23 already programmed May 16 18:52:37 install kernel: Pin 2-20 already programmed May 16 18:52:37 install kernel: Pin 2-21 already programmed May 16 18:52:37 install kernel: Pin 2-22 already programmed May 16 18:52:37 install kernel: Pin 2-20 already programmed May 16 18:52:37 install kernel: Pin 2-21 already programmed May 16 18:52:37 install kernel: Pin 2-22 already programmed May 16 18:52:37 install kernel: Pin 2-23 already programmed May 16 18:52:37 install kernel: Pin 2-21 already programmed May 16 18:52:37 install kernel: Pin 2-22 already programmed May 16 18:52:37 install kernel: Pin 2-23 already programmed May 16 18:52:37 install kernel: Pin 2-20 already programmed May 16 18:52:37 install kernel: IOAPIC[0]: Set PCI routing entry (2-18 -> 0xe1 -> IRQ 18) May 16 18:52:37 install kernel: 00:02:0e[A] -> 2-18 -> IRQ 18 May 16 18:52:37 install kernel: Pin 2-19 already programmed May 16 18:52:37 install kernel: Pin 2-16 already programmed May 16 18:52:37 install kernel: Pin 2-17 already programmed May 16 18:52:37 install kernel: Pin 2-20 already programmed May 16 18:52:37 install kernel: PCI: Using ACPI for IRQ routing May 16 18:52:37 install kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' [...] So, rc2-ac2 ACPI code already reported problems with the ethernet NIC, but here it worked without problems, anyway. Not so with the rc6-ac1 ACPI code... On the positive side: i810 audio seems to work fine (no problem with xmms playing MP3 over the network) Some minor annoyance: ACPI initialization reports "Error: only one processor found." I know, this is a SMP kernel on a non-SMP motherboard, but "Error" is quite a strong word for that situation. IMHO, "Warning: ..." would be more appropriate, but YMMV Regards, - andreas -- Andreas Haumer | mailto:andreas@xss.co.at *x Software + Systeme | http://www.xss.co.at/ Karmarschgasse 51/2/20 | Tel: +43-1-6060114-0 A-1100 Vienna, Austria | Fax: +43-1-6060114-71 --------------010009080108000007030409 Content-Type: text/plain; name="dmesg-2.4.21-rc6-ac1-acpi" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.4.21-rc6-ac1-acpi" Linux version 2.4.21-rc6-ac1 (root@install) (gcc version 2.95.3 20010315 (release)) #1 SMP Sat May 31 20:04:18 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004fffc000 (usable) BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data) BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 383MB HIGHMEM available. 896MB LOWMEM available. ACPI: have wakeup address 0xc0002000 On node 0 totalpages: 327676 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 98300 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f75a0 ACPI: RSDT (v001 ASUS 16944.11825) @ 0x4fffc000 ACPI: FADT (v001 ASUS 16944.11825) @ 0x4fffc100 ACPI: BOOT (v001 ASUS 16944.11825) @ 0x4fffc040 ACPI: MADT (v001 ASUS 16944.11825) @ 0x4fffc080 ACPI: DSDT (v001 ASUS 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x16] polarity[0x3] trigger[0x3]) Using ACPI (MADT) for SMP configuration information Kernel command line: BOOT_IMAGE=lx2421rc6ac1 ro root=303 1 Initializing CPU#0 Detected 1614.410 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 3217.81 BogoMIPS Memory: 1291828k/1310704k available (1113k kernel code, 18488k reserved, 503k data, 112k init, 393200k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 per-CPU timeslice cutoff: 1462.69 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 17. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 0FF 0F 0 0 0 0 0 1 1 41 04 0FF 0F 0 0 0 0 0 1 1 49 05 0FF 0F 0 0 0 0 0 1 1 51 06 0FF 0F 0 0 0 0 0 1 1 59 07 0FF 0F 0 0 0 0 0 1 1 61 08 0FF 0F 0 0 0 0 0 1 1 69 09 0FF 0F 0 0 0 0 0 1 1 71 0a 0FF 0F 0 0 0 0 0 1 1 79 0b 0FF 0F 0 0 0 0 0 1 1 81 0c 0FF 0F 0 0 0 0 0 1 1 89 0d 0FF 0F 0 0 0 0 0 1 1 91 0e 0FF 0F 0 0 0 0 0 1 1 99 0f 0FF 0F 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 0FF 0F 1 1 0 1 0 1 1 71 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9-> 0:22 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1614.3270 MHz. ..... host bus clock speed is 100.8952 MHz. cpu: 0, clocks: 1008952, slice: 504476 CPU0 migration_task 0 on cpu=0 ACPI: Subsystem revision 20030522 PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2 PCI: Using configuration type 1 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 22) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17) 00:00:1f[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xb9 -> IRQ 23) 00:00:1f[C] -> 2-23 -> IRQ 23 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19) 00:00:1f[D] -> 2-19 -> IRQ 19 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc9 -> IRQ 16) 00:01:00[A] -> 2-16 -> IRQ 16 Pin 2-17 already programmed IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21) 00:02:09[A] -> 2-21 -> IRQ 21 Pin 2-23 already programmed IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd9 -> IRQ 20) 00:02:09[D] -> 2-20 -> IRQ 20 Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-23 already programmed Pin 2-21 already programmed Pin 2-23 already programmed Pin 2-20 already programmed IOAPIC[0]: Set PCI routing entry (2-18 -> 0xe1 -> IRQ 18) 00:02:0e[A] -> 2-18 -> IRQ 18 Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-20 already programmed PCI: No IRQ known for interrupt pin A of device 02:0a.0 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: Maxtor 6E040L0, ATA DISK drive hdb: Maxtor 6E040L0, ATA DISK drive hdd: CDU5211, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 Partition check: hda:end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 unable to read partition table hdb:end_request: I/O error, dev 03:40 (hdb), sector 0 end_request: I/O error, dev 03:40 (hdb), sector 2 end_request: I/O error, dev 03:40 (hdb), sector 4 end_request: I/O error, dev 03:40 (hdb), sector 6 end_request: I/O error, dev 03:40 (hdb), sector 0 end_request: I/O error, dev 03:40 (hdb), sector 2 end_request: I/O error, dev 03:40 (hdb), sector 4 end_request: I/O error, dev 03:40 (hdb), sector 6 unable to read partition table IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: Compressed image found at block 0 Freeing initrd memory: 776k freed VFS: Mounted root (romfs filesystem) readonly. Mounted devfs on /dev ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 18 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:DMA hda: attached ide-disk driver. hda: host protected area => 1 hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63 hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > /dev/ide/host0/bus0/target1/lun0: p1 VFS: Mounted root (ext2 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Mounted devfs on /dev Freeing unused kernel memory: 112k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 1953464k swap-space (priority -1) blk: queue c0316ec0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0317010, I/O limit 4095Mb (mask 0xffffffff) hdd: attached ide-cdrom driver. hdd: ATAPI 52X CD-ROM drive, 120kB Cache Uniform CD-ROM driver Revision: 3.12 hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdd: drive_cmd: error=0x04Aborted Command Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1f.2 to 64 uhci.c: USB UHCI at I/O 0xb400, IRQ 19 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1f.4 to 64 uhci.c: USB UHCI at I/O 0xb000, IRQ 23 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver usbmouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4349 Thu Mar 27 19:00:02 PST 2003 ACPI: Power Button (FF) [PWRF] hub.c: new USB device 00:1f.2-1, assigned address 2 input0: Logitech USB Mouse on usb1:2.0 Software Watchdog Timer: 0.05, timer margin: 60 sec eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others PCI: No IRQ known for interrupt pin A of device 02:0a.0 divert: allocating divert_blk for eth0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:C5:87:D6, IRQ 9. Board assembly 734938-004, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). CSLIP: code copyright 1989 Regents of the University of California SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256). SLIP linefill/keepalive option. divert: not allocating divert_blk for non-ethernet device sl0 divert: not allocating divert_blk for non-ethernet device sl1 NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timed out: status f048 0c00 at 0/60 command 0001a000. --------------010009080108000007030409 Content-Type: text/plain; name="dmesg-2.4.21-rc6-ac1-acpioff" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.4.21-rc6-ac1-acpioff" Linux version 2.4.21-rc6-ac1 (root@install) (gcc version 2.95.3 20010315 (release)) #1 SMP Sat May 31 20:04:18 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004fffc000 (usable) BIOS-e820: 000000004fffc000 - 000000004ffff000 (ACPI data) BIOS-e820: 000000004ffff000 - 0000000050000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 383MB HIGHMEM available. 896MB LOWMEM available. ACPI: have wakeup address 0xc0002000 On node 0 totalpages: 327676 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 98300 pages. Kernel command line: BOOT_IMAGE=lx2421rc6ac1 ro root=303 acpi=off Found and enabled local APIC! Initializing CPU#0 Detected 1614.433 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 3217.81 BogoMIPS Memory: 1291832k/1310704k available (1113k kernel code, 18484k reserved, 503k data, 112k init, 393200k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 per-CPU timeslice cutoff: 1462.69 usecs. task migration cache decay timeout: 10 msecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1614.3283 MHz. ..... host bus clock speed is 100.8953 MHz. cpu: 0, clocks: 1008953, slice: 504476 CPU0 migration_task 0 on cpu=0 ACPI: Subsystem revision 20030522 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: Maxtor 6E040L0, ATA DISK drive hdb: Maxtor 6E040L0, ATA DISK drive hdd: CDU5211, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 Partition check: hda:end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 unable to read partition table hdb:end_request: I/O error, dev 03:40 (hdb), sector 0 end_request: I/O error, dev 03:40 (hdb), sector 2 end_request: I/O error, dev 03:40 (hdb), sector 4 end_request: I/O error, dev 03:40 (hdb), sector 6 end_request: I/O error, dev 03:40 (hdb), sector 0 end_request: I/O error, dev 03:40 (hdb), sector 2 end_request: I/O error, dev 03:40 (hdb), sector 4 end_request: I/O error, dev 03:40 (hdb), sector 6 unable to read partition table IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: Compressed image found at block 0 Freeing initrd memory: 776k freed VFS: Mounted root (romfs filesystem) readonly. Mounted devfs on /dev ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 18 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:DMA hda: attached ide-disk driver. hda: host protected area => 1 hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63 hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > /dev/ide/host0/bus0/target1/lun0: p1 VFS: Mounted root (ext2 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Mounted devfs on /dev Freeing unused kernel memory: 112k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 1953464k swap-space (priority -1) blk: queue c0316ec0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0317010, I/O limit 4095Mb (mask 0xffffffff) hdd: attached ide-cdrom driver. hdd: ATAPI 52X CD-ROM drive, 120kB Cache Uniform CD-ROM driver Revision: 3.12 hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdd: drive_cmd: error=0x04Aborted Command Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 5 for device 00:1f.2 PCI: Setting latency timer of device 00:1f.2 to 64 uhci.c: USB UHCI at I/O 0xb400, IRQ 5 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 9 for device 00:1f.4 PCI: Setting latency timer of device 00:1f.4 to 64 uhci.c: USB UHCI at I/O 0xb000, IRQ 9 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver usbmouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4349 Thu Mar 27 19:00:02 PST 2003 hub.c: new USB device 00:1f.2-1, assigned address 2 input0: Logitech USB Mouse on usb1:2.0 Software Watchdog Timer: 0.05, timer margin: 60 sec eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others PCI: Found IRQ 9 for device 02:0a.0 divert: allocating divert_blk for eth0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:C5:87:D6, IRQ 9. Board assembly 734938-004, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). CSLIP: code copyright 1989 Regents of the University of California SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256). SLIP linefill/keepalive option. divert: not allocating divert_blk for non-ethernet device sl0 divert: not allocating divert_blk for non-ethernet device sl1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Intel 810 + AC97 Audio, version 0.24, 20:49:16 May 31 2003 PCI: Found IRQ 10 for device 00:1f.5 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH2 found at IO 0xa400 and 0xa800, MEM 0x0000 and 0x0000, IRQ 10 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 --------------010009080108000007030409-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/