Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752125AbdDMMdr (ORCPT ); Thu, 13 Apr 2017 08:33:47 -0400 Received: from smtprelay2.synopsys.com ([198.182.60.111]:60166 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750765AbdDMMdp (ORCPT ); Thu, 13 Apr 2017 08:33:45 -0400 From: Alexey Brodkin To: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Alexey Brodkin , Greg Kroah-Hartman , Masahiro Yamada , Geert Uytterhoeven , Nicolas Pitre , Thomas Gleixner , Felipe Balbi , Felix Fietkau , Jeremy Kerr , linux-snps-arc@lists.infradead.org, stable@vger.kernel.org Subject: [PATCH] usb: Make sure usb/phy/of gets built-in Date: Thu, 13 Apr 2017 15:33:34 +0300 Message-Id: <1492086814-21006-1-git-send-email-abrodkin@synopsys.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1592 Lines: 47 DWC3 driver uses of_usb_get_phy_mode() which is implemented in drivers/usb/phy/of.c and in bare minimal configuration it might not be pulled in kernel binary. In case of ARC or ARM this could be easily reproduced with "allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m. On building all ends-up with: ---------------------->8------------------ Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 5 modules ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 ---------------------->8------------------ Signed-off-by: Alexey Brodkin Cc: Greg Kroah-Hartman Cc: Masahiro Yamada Cc: Geert Uytterhoeven Cc: Nicolas Pitre Cc: Thomas Gleixner Cc: Felipe Balbi Cc: Felix Fietkau Cc: Jeremy Kerr Cc: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org --- drivers/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/Makefile b/drivers/Makefile index 2eced9afba53..8f8bdc9e3d29 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -104,6 +104,7 @@ obj-$(CONFIG_USB_PHY) += usb/ obj-$(CONFIG_USB) += usb/ obj-$(CONFIG_PCI) += usb/ obj-$(CONFIG_USB_GADGET) += usb/ +obj-$(CONFIG_OF) += usb/ obj-$(CONFIG_SERIO) += input/serio/ obj-$(CONFIG_GAMEPORT) += input/gameport/ obj-$(CONFIG_INPUT) += input/ -- 2.7.4