Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262116AbTFBJzE (ORCPT ); Mon, 2 Jun 2003 05:55:04 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262114AbTFBJzE (ORCPT ); Mon, 2 Jun 2003 05:55:04 -0400 Received: from yankee.rb.xcalibre.co.uk ([217.8.240.35]:30129 "EHLO yankee.rb.xcalibre.co.uk") by vger.kernel.org with ESMTP id S262116AbTFBJxE (ORCPT ); Mon, 2 Jun 2003 05:53:04 -0400 Envelope-to: linux-kernel@vger.kernel.org From: Alistair J Strachan To: Andrew Morton Subject: Re: 2.5.70-mm3 Date: Mon, 2 Jun 2003 11:06:21 +0100 User-Agent: KMail/1.5.9 References: <20030531013716.07d90773.akpm@digeo.com> <200306021017.15633.alistair@devzero.co.uk> <20030602022939.17855838.akpm@digeo.com> In-Reply-To: <20030602022939.17855838.akpm@digeo.com> Cc: linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Disposition: inline Content-Type: Multipart/Mixed; boundary="Boundary-00=_dGy2+sk7rzkxofW" Message-Id: <200306021106.21495.alistair@devzero.co.uk> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 32324 Lines: 1272 --Boundary-00=_dGy2+sk7rzkxofW Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Monday 02 June 2003 10:29, you wrote: > Alistair J Strachan wrote: > > Bad page state at free_hot_cold_page > > flags:0x01010000 mapping:00000000 mapped:1 count:0 > > Backtrace: > > Call Trace: > > [bad_page+93/144] bad_page+0x5d/0x90 > > [free_hot_cold_page+112/256] free_hot_cold_page+0x70/0x100 > > [zap_pte_range+385/448] zap_pte_range+0x181/0x1c0 > > [do_wp_page+437/848] do_wp_page+0x1b5/0x350 > > [zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70 > > [unmap_page_range+75/128] unmap_page_range+0x4b/0x80 > > [unmap_vmas+254/544] unmap_vmas+0xfe/0x220 > > [exit_mmap+109/384] exit_mmap+0x6d/0x180 > > [mmput+65/176] mmput+0x41/0xb0 > > [do_exit+243/832] do_exit+0xf3/0x340 > > eww, that's a PageDirect page. Never seen that before - it's > bad. > > Is the box SMP? Nope, UP, with a UP kernel. I've attached the config I used to compile it, and a dump of dmesg. Since I rebooted, the machine doesn't seem to have any problems, so maybe it was a one-off. Hope this helps. Cheers, Alistair. --Boundary-00=_dGy2+sk7rzkxofW Content-Type: text/plain; charset="iso-8859-1"; name="dump" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dump" Linux version 2.5.70-mm3 (root@uberputer.devzero.co.uk) (gcc version 3.3) #= 3 Sun Jun 1 20:25:53 BST 2003 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=3D2.5.70-mm3 ro root=3D302 quiet parport=3D= 0x378,7,3 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 751.704 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1486.84 BogoMIPS Memory: 515216k/524224k available (1902k kernel code, 8264k reserved, 632k = data, 176k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) =2D> /dev =2D> /dev/console =2D> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v2.0 (20020519) Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=3D1 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Enabling SEP on CPU 0 Journalled Block Device driver loaded devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Limiting direct PCI/PCI transfers. pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xe8000000 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled tts/0 at I/O 0x3f8 (irq =3D 4) is a 16550A tts/1 at I/O 0x2f8 (irq =3D 3) is a 16550A parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EP= P,ECP,DMA] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) anticipatory scheduling elevator =46loppy drive(s): fd0 is 1.44M =46DC 0 is a post-1991 82077 loop: loaded (max 8 devices) NET3 PLIP version 2.4-parport gniibe@mri.co.jp plip0: Parallel port at 0x378, using IRQ 7. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Linux video capture interface: v1.00 bttv: driver version 0.9.4 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge is PCI device 8086:7190 bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0e.0 PCI: Sharing IRQ 11 with 00:0e.1 bttv0: Bt878 (rev 17) at 00:0e.0, irq: 11, latency: 64, mmio: 0xee000000 bttv0: detected: Hauppauge WinTV [card=3D10], PCI subsystem ID is 0070:13eb bttv0: using: BT878(Hauppauge (bt878)) [card=3D10,autodetected] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] bttv0: Hauppauge eeprom: model=3D61344, tuner=3DPhilips FM1216 (5), radio= =3Dyes bttv0: using tuner=3D5 bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 =3D> 35468950 .. ok msp34xx: init: chip=3DMSP3415D-B3 +nicam +simple msp3410: daemon started registering 0-0040 tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,t= ea6420,tda8425,pic16c54 (PV951),ta8874z SAA5249 driver (SAA5249 interface) for VideoText version 1.7 tuner: chip found @ 0xc2 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) registering 0-0061 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: FUJITSU MPE3273AH, ATA DISK drive hdb: IOMEGA ZIP 250 ATAPI Floppy, ATAPI FLOPPY drive anticipatory scheduling elevator anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Pioneer DVD-ROM ATAPIModel DVD-115 0133, ATAPI CD/DVD-ROM drive hdd: SONY CD-RW CRX175A1, ATAPI CD/DVD-ROM drive anticipatory scheduling elevator anticipatory scheduling elevator ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 53359376 sectors (27320 MB) w/2048KiB Cache, CHS=3D52935/16/63, UDMA(3= 3) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdd, sector 0 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver= v2.1 PCI: Found IRQ 10 for device 00:07.2 uhci-hcd 00:07.2: PCI device 8086:7112 uhci-hcd 00:07.2: irq 10, io base 0000e000 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.13:USB Scanner Driver mice: PS/2 mouse device common for all mice drivers/input/joystick/sidewinder.c: Init 0: Opened pci00:10.1/gameport0, i= o 0xe800, speed 1242 sidewinder.c: Read 0 triplets. [] drivers/input/joystick/sidewinder.c: Init 1: Mode 1. Length 0. sidewinder.c: Read 0 triplets. [] drivers/input/joystick/sidewinder.c: Init 1b: Length 0. gameport: PCI device 1102:7002 at pci00:10.1 speed 1242 kHz serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 i2c /dev entries driver module version 2.7.0 (20021208) Creative EMU10K1 PCI Audio Driver, version 0.20, 17:42:05 Jun 1 2003 PCI: Found IRQ 12 for device 00:10.0 emu10k1: EMU10K1 rev 7 model 0x8026 found, IO at 0xe400-0xe41f, IRQ 12 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) IPv4 over IPv4 tunneling driver ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team arp_tables: (C) 2002 David S. Miller NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-0:0: new USB device on port 1, assigned address 2 kjournald starting. Commit interval 5 seconds hub 1-1:0: USB hub found hub 1-1:0: 4 ports detected EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. =46reeing unused kernel memory: 176k freed hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301 hub 1-0:0: new USB device on port 2, assigned address 3 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse=AE Explorer] o= n usb-00:07.2-2 hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-1:0: new USB device on port 1, assigned address 4 drivers/usb/image/scanner.c: USB scanner device (0x04b8/0x0110) now attache= d to usb/scanner0 hub 1-1:0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 1-1:0: new USB device on port 2, assigned address 5 hub 1-1:0: debounce: port 3: delay 100ms stable 4 status 0x301 EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. hub 1-1:0: new USB device on port 3, assigned address 6 input: USB HID v1.00 Joystick [Microsoft Microsoft SideWinder Precision Pro= (USB)] on usb-00:07.2-1.3 hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101 hub 1-1:0: new USB device on port 4, assigned address 7 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt= 0 proto 2 vid 0x04B8 pid 0x0001 Adding 262136k swap on /var/cache/swap. Priority:5 extents:1058 --Boundary-00=_dGy2+sk7rzkxofW Content-Type: text/plain; charset="iso-8859-1"; name="kernelops-2.5" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="kernelops-2.5" # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_EMBEDDED is not set CONFIG_FUTEX=y CONFIG_EPOLL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_KMOD is not set # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_025GB is not set # CONFIG_05GB is not set CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_3GB is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI Support # # CONFIG_ACPI is not set CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set CONFIG_APM_RTC_IS_GMT=y # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG is not set # # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_LBD is not set # # ATA/ATAPI/MFM/RLL device support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_IDE_TASK_IOCTL=y # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI device support # # CONFIG_SCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set CONFIG_IP_ADVANCED_ROUTER=y # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_TOS is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=y # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y CONFIG_IP_NF_FTP=y CONFIG_IP_NF_IRC=y # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH_ESP=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_HELPER=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_UNCLEAN=y CONFIG_IP_NF_MATCH_OWNER=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_MIRROR=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_NAT_LOCAL=y CONFIG_IP_NF_NAT_SNMP_BASIC=y CONFIG_IP_NF_NAT_IRC=y CONFIG_IP_NF_NAT_FTP=y CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y # CONFIG_IPV6 is not set # CONFIG_XFRM_USER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PLIP=y CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices (depends on LLC=y) # # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # CONFIG_GAMEPORT=y CONFIG_SOUND_GAMEPORT=y # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set CONFIG_GAMEPORT_EMU10K1=y # CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set # CONFIG_GAMEPORT_CS461x is not set CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=y # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set CONFIG_JOYSTICK_SIDEWINDER=y # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDDLER is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set # CONFIG_INPUT_JOYDUMP is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=64 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PHILIPSPAR is not set # CONFIG_I2C_ELV is not set # CONFIG_I2C_VELLEMAN is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_ALGOPCF is not set CONFIG_I2C_CHARDEV=y # # I2C Hardware Sensors Mainboard support # # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIAPRO is not set # # I2C Hardware Sensors Chip support # # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_I2C_SENSOR is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD_8151 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # Multimedia devices # CONFIG_VIDEO_DEV=y # # Video For Linux # CONFIG_VIDEO_PROC_FS=y # # Video Adapters # CONFIG_VIDEO_BT848=y # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_W9966 is not set # CONFIG_VIDEO_CPIA is not set CONFIG_VIDEO_SAA5249=y # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_ZR36120 is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # # Radio Adapters # # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set CONFIG_VIDEO_VIDEOBUF=y CONFIG_VIDEO_TUNER=y CONFIG_VIDEO_BUF=y CONFIG_VIDEO_BTCX=y # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y # CONFIG_TMPFS is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-15" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # # CONFIG_SND is not set # # Open Sound System # CONFIG_SOUND_PRIME=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set CONFIG_SOUND_EMU10K1=y CONFIG_MIDI_EMU10K1=y # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # # SCSI support is needed for USB Storage # # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=y # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_STV680 is not set # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # Bluetooth support # # CONFIG_BT is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_IOVIRT is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_SPINLINE is not set CONFIG_KALLSYMS=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_KGDB is not set CONFIG_DEBUG_INFO=y # CONFIG_FRAME_POINTER is not set # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # # CONFIG_CRC32 is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y --Boundary-00=_dGy2+sk7rzkxofW-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/