Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756787AbdDPVmb (ORCPT ); Sun, 16 Apr 2017 17:42:31 -0400 Received: from 4.mo177.mail-out.ovh.net ([46.105.37.72]:46920 "EHLO 4.mo177.mail-out.ovh.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756638AbdDPVm2 (ORCPT ); Sun, 16 Apr 2017 17:42:28 -0400 From: Cyrille Pitchen To: marek.vasut@gmail.com, linux-mtd@lists.infradead.org, kdasu.kdev@gmail.com Cc: computersforpeace@gmail.com, dwmw2@infradead.org, boris.brezillon@free-electrons.com, richard@nod.at, linux-kernel@vger.kernel.org, jartur@cadence.com, mar.krzeminski@gmail.com, Cyrille Pitchen Subject: [PATCH v6 1/4] mtd: spi-nor: introduce more SPI protocols and the Dual Transfer Mode Date: Sun, 16 Apr 2017 23:41:55 +0200 Message-Id: <8586e18a0dcae7a5969201b1bf5dbde29ff24449.1492374675.git.cyrille.pitchen@atmel.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: References: In-Reply-To: References: X-Ovh-Tracer-Id: 16519766387243199880 X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: 25 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeliedrvdeggdduieegucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecuqfggjfdpvefjgfevmfevgfenuceurghilhhouhhtmecufedttdenucgotffhvedqqdfjughrqdfuuhhsphgvtghtqdhlohifucdlhedmnegotffhvedqqdfjughrqdfuuhhsphgvtghtucdlvddtmd Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 44302 Lines: 1423 This patch changes the prototype of spi_nor_scan(): its 3rd parameter is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor framework about the actual hardware capabilities supported by the SPI controller and its driver. Besides, this patch also introduces a new 'struct spi_nor_flash_parameter' telling the spi-nor framework about the hardware capabilities supported by the SPI flash memory and the associated settings required to use those hardware caps. Currently the 'struct spi_nor_flash_parameter' is filled with legacy values but a later patch will allow to fill it dynamically by reading the JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI memory. With both structures, the spi-nor framework can now compute the best match between hardware caps supported by both the (Q)SPI memory and controller hence selecting the relevant SPI protocols and op codes for (Fast) Read and Page Program operations. The 'struct spi_nor_flash_parameter' also provides the spi-nor framework with the number of dummy cycles to be used with each Fast Read commands. Finally the 'struct spi_nor_flash_parameter', through the optional .quad_enable() hook, tells the spi-nor framework how to set the Quad Enable (QE) bit of the QSPI memory to enable its Quad SPI features. For now the .quad_enable() hook is set with the exact same functions as already used before this patch: the right function was and is still chosen only based on the memory manufacturer. In further patches, this choice will be made also based on the memory part. Indeed, we already know that some manufacturers, like Spansion, have updated their procedure to set the QE bit with their latest QSPI memories. The new procedure is safer but not supported by the oldest memory parts. The SFDP table could be one solution to select the relevant procedure but this issue will be addressed in further dedicated patches. Signed-off-by: Cyrille Pitchen --- drivers/mtd/devices/m25p80.c | 18 +- drivers/mtd/spi-nor/aspeed-smc.c | 23 +- drivers/mtd/spi-nor/atmel-quadspi.c | 83 ++++-- drivers/mtd/spi-nor/cadence-quadspi.c | 18 +- drivers/mtd/spi-nor/fsl-quadspi.c | 6 +- drivers/mtd/spi-nor/hisi-sfc.c | 31 ++- drivers/mtd/spi-nor/intel-spi.c | 7 +- drivers/mtd/spi-nor/mtk-quadspi.c | 15 +- drivers/mtd/spi-nor/nxp-spifi.c | 22 +- drivers/mtd/spi-nor/spi-nor.c | 472 +++++++++++++++++++++++++++------- drivers/mtd/spi-nor/stm32-quadspi.c | 27 +- include/linux/mtd/spi-nor.h | 158 +++++++++++- 12 files changed, 686 insertions(+), 194 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index c4df3b1bded0..34f33f6b88b4 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -111,10 +111,10 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) { - switch (nor->flash_read) { - case SPI_NOR_DUAL: + switch (nor->read_proto) { + case SNOR_PROTO_1_1_2: return 2; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_4: return 4; default: return 0; @@ -196,7 +196,11 @@ static int m25p_probe(struct spi_device *spi) struct flash_platform_data *data; struct m25p *flash; struct spi_nor *nor; - enum read_mode mode = SPI_NOR_NORMAL; + struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; char *flash_name; int ret; @@ -222,9 +226,9 @@ static int m25p_probe(struct spi_device *spi) flash->spi = spi; if (spi->mode & SPI_RX_QUAD) - mode = SPI_NOR_QUAD; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; else if (spi->mode & SPI_RX_DUAL) - mode = SPI_NOR_DUAL; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; if (data && data->name) nor->mtd.name = data->name; @@ -241,7 +245,7 @@ static int m25p_probe(struct spi_device *spi) else flash_name = spi->modalias; - ret = spi_nor_scan(nor, flash_name, mode); + ret = spi_nor_scan(nor, flash_name, &hwcaps); if (ret) return ret; diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c index 56051d30f000..3f875c8d6339 100644 --- a/drivers/mtd/spi-nor/aspeed-smc.c +++ b/drivers/mtd/spi-nor/aspeed-smc.c @@ -585,14 +585,12 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) * TODO: Adjust clocks if fast read is supported and interpret * SPI-NOR flags to adjust controller settings. */ - switch (chip->nor.flash_read) { - case SPI_NOR_NORMAL: - cmd = CONTROL_COMMAND_MODE_NORMAL; - break; - case SPI_NOR_FAST: - cmd = CONTROL_COMMAND_MODE_FREAD; - break; - default: + if (chip->nor.read_proto == SNOR_PROTO_1_1_1) { + if (chip->nor.read_dummy == 0) + cmd = CONTROL_COMMAND_MODE_NORMAL; + else + cmd = CONTROL_COMMAND_MODE_FREAD; + } else { dev_err(chip->nor.dev, "unsupported SPI read mode\n"); return -EINVAL; } @@ -608,6 +606,11 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, struct device_node *np, struct resource *r) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; const struct aspeed_smc_info *info = controller->info; struct device *dev = controller->dev; struct device_node *child; @@ -671,11 +674,11 @@ static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, break; /* - * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL + * TODO: Add support for Dual and Quad SPI protocols * attach when board support is present as determined * by of property. */ - ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) break; diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c index 47937d9beec6..ba76fa8f2031 100644 --- a/drivers/mtd/spi-nor/atmel-quadspi.c +++ b/drivers/mtd/spi-nor/atmel-quadspi.c @@ -275,14 +275,48 @@ static void atmel_qspi_debug_command(struct atmel_qspi *aq, static int atmel_qspi_run_command(struct atmel_qspi *aq, const struct atmel_qspi_command *cmd, - u32 ifr_tfrtyp, u32 ifr_width) + u32 ifr_tfrtyp, enum spi_nor_protocol proto) { u32 iar, icr, ifr, sr; int err = 0; iar = 0; icr = 0; - ifr = ifr_tfrtyp | ifr_width; + ifr = ifr_tfrtyp; + + /* Set the SPI protocol */ + switch (proto) { + case SNOR_PROTO_1_1_1: + ifr |= QSPI_IFR_WIDTH_SINGLE_BIT_SPI; + break; + + case SNOR_PROTO_1_1_2: + ifr |= QSPI_IFR_WIDTH_DUAL_OUTPUT; + break; + + case SNOR_PROTO_1_1_4: + ifr |= QSPI_IFR_WIDTH_QUAD_OUTPUT; + break; + + case SNOR_PROTO_1_2_2: + ifr |= QSPI_IFR_WIDTH_DUAL_IO; + break; + + case SNOR_PROTO_1_4_4: + ifr |= QSPI_IFR_WIDTH_QUAD_IO; + break; + + case SNOR_PROTO_2_2_2: + ifr |= QSPI_IFR_WIDTH_DUAL_CMD; + break; + + case SNOR_PROTO_4_4_4: + ifr |= QSPI_IFR_WIDTH_QUAD_CMD; + break; + + default: + return -EINVAL; + } /* Compute instruction parameters */ if (cmd->enable.bits.instruction) { @@ -434,7 +468,7 @@ static int atmel_qspi_read_reg(struct spi_nor *nor, u8 opcode, cmd.rx_buf = buf; cmd.buf_len = len; return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->reg_proto); } static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode, @@ -450,7 +484,7 @@ static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode, cmd.tx_buf = buf; cmd.buf_len = len; return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->reg_proto); } static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len, @@ -469,7 +503,7 @@ static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len, cmd.tx_buf = write_buf; cmd.buf_len = len; ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->write_proto); return (ret < 0) ? ret : len; } @@ -484,7 +518,7 @@ static int atmel_qspi_erase(struct spi_nor *nor, loff_t offs) cmd.instruction = nor->erase_opcode; cmd.address = (u32)offs; return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->reg_proto); } static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len, @@ -493,27 +527,8 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len, struct atmel_qspi *aq = nor->priv; struct atmel_qspi_command cmd; u8 num_mode_cycles, num_dummy_cycles; - u32 ifr_width; ssize_t ret; - switch (nor->flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: - ifr_width = QSPI_IFR_WIDTH_SINGLE_BIT_SPI; - break; - - case SPI_NOR_DUAL: - ifr_width = QSPI_IFR_WIDTH_DUAL_OUTPUT; - break; - - case SPI_NOR_QUAD: - ifr_width = QSPI_IFR_WIDTH_QUAD_OUTPUT; - break; - - default: - return -EINVAL; - } - if (nor->read_dummy >= 2) { num_mode_cycles = 2; num_dummy_cycles = nor->read_dummy - 2; @@ -536,7 +551,7 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len, cmd.rx_buf = read_buf; cmd.buf_len = len; ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ_MEM, - ifr_width); + nor->read_proto); return (ret < 0) ? ret : len; } @@ -590,6 +605,20 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) static int atmel_qspi_probe(struct platform_device *pdev) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_READ_1_2_2 | + SNOR_HWCAPS_READ_2_2_2 | + SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_READ_1_4_4 | + SNOR_HWCAPS_READ_4_4_4 | + SNOR_HWCAPS_PP | + SNOR_HWCAPS_PP_1_1_4 | + SNOR_HWCAPS_PP_1_4_4 | + SNOR_HWCAPS_PP_4_4_4, + }; struct device_node *child, *np = pdev->dev.of_node; struct atmel_qspi *aq; struct resource *res; @@ -679,7 +708,7 @@ static int atmel_qspi_probe(struct platform_device *pdev) if (err) goto disable_clk; - err = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + err = spi_nor_scan(nor, NULL, &hwcaps); if (err) goto disable_clk; diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 9f8102de1b16..40096d73536c 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -855,15 +855,14 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read) f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; if (read) { - switch (nor->flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + switch (nor->read_proto) { + case SNOR_PROTO_1_1_1: f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; break; - case SPI_NOR_DUAL: + case SNOR_PROTO_1_1_2: f_pdata->data_width = CQSPI_INST_TYPE_DUAL; break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_4: f_pdata->data_width = CQSPI_INST_TYPE_QUAD; break; default: @@ -1069,6 +1068,13 @@ static void cqspi_controller_init(struct cqspi_st *cqspi) static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_PP, + }; struct platform_device *pdev = cqspi->pdev; struct device *dev = &pdev->dev; struct cqspi_flash_pdata *f_pdata; @@ -1123,7 +1129,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) goto err; } - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) goto err; diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 1476135e0d50..f17d22435bfc 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -957,6 +957,10 @@ static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) static int fsl_qspi_probe(struct platform_device *pdev) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_PP, + }; struct device_node *np = pdev->dev.of_node; struct device *dev = &pdev->dev; struct fsl_qspi *q; @@ -1065,7 +1069,7 @@ static int fsl_qspi_probe(struct platform_device *pdev) /* set the chip address for READID */ fsl_qspi_set_base_addr(q, nor); - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) goto mutex_failed; diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c index a286350627a6..d1106832b9d5 100644 --- a/drivers/mtd/spi-nor/hisi-sfc.c +++ b/drivers/mtd/spi-nor/hisi-sfc.c @@ -120,19 +120,24 @@ static inline int wait_op_finish(struct hifmc_host *host) (reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT); } -static int get_if_type(enum read_mode flash_read) +static int get_if_type(enum spi_nor_protocol proto) { enum hifmc_iftype if_type; - switch (flash_read) { - case SPI_NOR_DUAL: + switch (proto) { + case SNOR_PROTO_1_1_2: if_type = IF_TYPE_DUAL; break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_2_2: + if_type = IF_TYPE_DIO; + break; + case SNOR_PROTO_1_1_4: if_type = IF_TYPE_QUAD; break; - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + case SNOR_PROTO_1_4_4: + if_type = IF_TYPE_QIO; + break; + case SNOR_PROTO_1_1_1: default: if_type = IF_TYPE_STD; break; @@ -253,7 +258,10 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off, writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN); reg = OP_CFG_FM_CS(priv->chipselect); - if_type = get_if_type(nor->flash_read); + if (op_type == FMC_OP_READ) + if_type = get_if_type(nor->read_proto); + else + if_type = get_if_type(nor->write_proto); reg |= OP_CFG_MEM_IF_TYPE(if_type); if (op_type == FMC_OP_READ) reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3); @@ -321,6 +329,13 @@ static ssize_t hisi_spi_nor_write(struct spi_nor *nor, loff_t to, static int hisi_spi_nor_register(struct device_node *np, struct hifmc_host *host) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_PP, + }; struct device *dev = host->dev; struct spi_nor *nor; struct hifmc_priv *priv; @@ -362,7 +377,7 @@ static int hisi_spi_nor_register(struct device_node *np, nor->read = hisi_spi_nor_read; nor->write = hisi_spi_nor_write; nor->erase = NULL; - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) return ret; diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 986a3d020a3a..8a596bfeddff 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -715,6 +715,11 @@ static void intel_spi_fill_partition(struct intel_spi *ispi, struct intel_spi *intel_spi_probe(struct device *dev, struct resource *mem, const struct intel_spi_boardinfo *info) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; struct mtd_partition part; struct intel_spi *ispi; int ret; @@ -746,7 +751,7 @@ struct intel_spi *intel_spi_probe(struct device *dev, ispi->nor.write = intel_spi_write; ispi->nor.erase = intel_spi_erase; - ret = spi_nor_scan(&ispi->nor, NULL, SPI_NOR_NORMAL); + ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps); if (ret) { dev_info(dev, "failed to locate the chip\n"); return ERR_PTR(ret); diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c index b6377707ce32..8a20ec4991c8 100644 --- a/drivers/mtd/spi-nor/mtk-quadspi.c +++ b/drivers/mtd/spi-nor/mtk-quadspi.c @@ -123,20 +123,20 @@ static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor) { struct spi_nor *nor = &mt8173_nor->nor; - switch (nor->flash_read) { - case SPI_NOR_FAST: + switch (nor->read_proto) { + case SNOR_PROTO_1_1_1: writeb(nor->read_opcode, mt8173_nor->base + MTK_NOR_PRGDATA3_REG); writeb(MTK_NOR_FAST_READ, mt8173_nor->base + MTK_NOR_CFG1_REG); break; - case SPI_NOR_DUAL: + case SNOR_PROTO_1_1_2: writeb(nor->read_opcode, mt8173_nor->base + MTK_NOR_PRGDATA3_REG); writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base + MTK_NOR_DUAL_REG); break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_4: writeb(nor->read_opcode, mt8173_nor->base + MTK_NOR_PRGDATA4_REG); writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base + @@ -408,6 +408,11 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, static int mtk_nor_init(struct mt8173_nor *mt8173_nor, struct device_node *flash_node) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_PP, + }; int ret; struct spi_nor *nor; @@ -426,7 +431,7 @@ static int mtk_nor_init(struct mt8173_nor *mt8173_nor, nor->write_reg = mt8173_nor_write_reg; nor->mtd.name = "mtk_nor"; /* initialized with NULL */ - ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) return ret; diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c index 73a14f40928b..15374216d4d9 100644 --- a/drivers/mtd/spi-nor/nxp-spifi.c +++ b/drivers/mtd/spi-nor/nxp-spifi.c @@ -240,13 +240,12 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs) static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi) { - switch (spifi->nor.flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + switch (spifi->nor.read_proto) { + case SNOR_PROTO_1_1_1: spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL; break; - case SPI_NOR_DUAL: - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_2: + case SNOR_PROTO_1_1_4: spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA; break; default: @@ -274,7 +273,11 @@ static void nxp_spifi_dummy_id_read(struct spi_nor *nor) static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, struct device_node *np) { - enum read_mode flash_read; + struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; u32 ctrl, property; u16 mode = 0; int ret; @@ -308,13 +311,12 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, if (mode & SPI_RX_DUAL) { ctrl |= SPIFI_CTRL_DUAL; - flash_read = SPI_NOR_DUAL; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; } else if (mode & SPI_RX_QUAD) { ctrl &= ~SPIFI_CTRL_DUAL; - flash_read = SPI_NOR_QUAD; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; } else { ctrl |= SPIFI_CTRL_DUAL; - flash_read = SPI_NOR_NORMAL; } switch (mode & (SPI_CPHA | SPI_CPOL)) { @@ -351,7 +353,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, */ nxp_spifi_dummy_id_read(&spifi->nor); - ret = spi_nor_scan(&spifi->nor, NULL, flash_read); + ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps); if (ret) { dev_err(spifi->dev, "device scan failed\n"); return ret; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 36684ca7aa24..3bb2adff306b 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -150,24 +150,6 @@ static int read_cr(struct spi_nor *nor) } /* - * Dummy Cycle calculation for different type of read. - * It can be used to support more commands with - * different dummy cycle requirements. - */ -static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor) -{ - switch (nor->flash_read) { - case SPI_NOR_FAST: - case SPI_NOR_DUAL: - case SPI_NOR_QUAD: - return 8; - case SPI_NOR_NORMAL: - return 0; - } - return 0; -} - -/* * Write status register 1 byte * Returns negative if error occurred. */ @@ -221,6 +203,10 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode) { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B }, { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B }, { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B }, + + { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B }, + { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B }, + { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B }, }; return spi_nor_convert_opcode(opcode, spi_nor_3to4_read, @@ -1460,30 +1446,6 @@ static int spansion_quad_enable(struct spi_nor *nor) return 0; } -static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info) -{ - int status; - - switch (JEDEC_MFR(info)) { - case SNOR_MFR_MACRONIX: - status = macronix_quad_enable(nor); - if (status) { - dev_err(nor->dev, "Macronix quad-read not enabled\n"); - return -EINVAL; - } - return status; - case SNOR_MFR_MICRON: - return 0; - default: - status = spansion_quad_enable(nor); - if (status) { - dev_err(nor->dev, "Spansion quad-read not enabled\n"); - return -EINVAL; - } - return status; - } -} - static int spi_nor_check(struct spi_nor *nor) { if (!nor->dev || !nor->read || !nor->write || @@ -1536,8 +1498,351 @@ static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor) return 0; } -int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) + +struct spi_nor_read_command { + u8 num_mode_clocks; + u8 num_wait_states; + u8 opcode; + enum spi_nor_protocol proto; +}; + +struct spi_nor_pp_command { + u8 opcode; + enum spi_nor_protocol proto; +}; + +enum spi_nor_read_command_index { + SNOR_CMD_READ, + SNOR_CMD_READ_FAST, + SNOR_CMD_READ_1_1_1_DTR, + + /* Dual SPI */ + SNOR_CMD_READ_1_1_2, + SNOR_CMD_READ_1_2_2, + SNOR_CMD_READ_2_2_2, + SNOR_CMD_READ_1_2_2_DTR, + + /* Quad SPI */ + SNOR_CMD_READ_1_1_4, + SNOR_CMD_READ_1_4_4, + SNOR_CMD_READ_4_4_4, + SNOR_CMD_READ_1_4_4_DTR, + + /* Octo SPI */ + SNOR_CMD_READ_1_1_8, + SNOR_CMD_READ_1_8_8, + SNOR_CMD_READ_8_8_8, + SNOR_CMD_READ_1_8_8_DTR, + + SNOR_CMD_READ_MAX +}; + +enum spi_nor_pp_command_index { + SNOR_CMD_PP, + + /* Quad SPI */ + SNOR_CMD_PP_1_1_4, + SNOR_CMD_PP_1_4_4, + SNOR_CMD_PP_4_4_4, + + /* Octo SPI */ + SNOR_CMD_PP_1_1_8, + SNOR_CMD_PP_1_8_8, + SNOR_CMD_PP_8_8_8, + + SNOR_CMD_PP_MAX +}; + +struct spi_nor_flash_parameter { + u64 size; + u32 page_size; + + struct spi_nor_hwcaps hwcaps; + struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; + struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; + + int (*quad_enable)(struct spi_nor *nor); +}; + + +static void +spi_nor_set_read_settings(struct spi_nor_read_command *read, + u8 num_mode_clocks, + u8 num_wait_states, + u8 opcode, + enum spi_nor_protocol proto) +{ + read->num_mode_clocks = num_mode_clocks; + read->num_wait_states = num_wait_states; + read->opcode = opcode; + read->proto = proto; +} + +static void +spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, + u8 opcode, + enum spi_nor_protocol proto) +{ + pp->opcode = opcode; + pp->proto = proto; +} + +static int spi_nor_init_params(struct spi_nor *nor, + const struct flash_info *info, + struct spi_nor_flash_parameter *params) +{ + /* Set legacy flash parameters as default. */ + memset(params, 0, sizeof(*params)); + + /* Set SPI NOR sizes. */ + params->size = info->sector_size * info->n_sectors; + params->page_size = info->page_size; + + /* (Fast) Read settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_READ; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ], + 0, 0, SPINOR_OP_READ, + SNOR_PROTO_1_1_1); + + if (!(info->flags & SPI_NOR_NO_FR)) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST], + 0, 8, SPINOR_OP_READ_FAST, + SNOR_PROTO_1_1_1); + } + + if (info->flags & SPI_NOR_DUAL_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2], + 0, 8, SPINOR_OP_READ_1_1_2, + SNOR_PROTO_1_1_2); + } + + if (info->flags & SPI_NOR_QUAD_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4], + 0, 8, SPINOR_OP_READ_1_1_4, + SNOR_PROTO_1_1_4); + } + + /* Page Program settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_PP; + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], + SPINOR_OP_PP, SNOR_PROTO_1_1_1); + + /* Select the procedure to set the Quad Enable bit. */ + if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD | + SNOR_HWCAPS_PP_QUAD)) { + switch (JEDEC_MFR(info)) { + case SNOR_MFR_MACRONIX: + params->quad_enable = macronix_quad_enable; + break; + + case SNOR_MFR_MICRON: + break; + + default: + params->quad_enable = spansion_quad_enable; + break; + } + } + + return 0; +} + +static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size) { + size_t i; + + for (i = 0; i < size; i++) + if (table[i][0] == (int)hwcaps) + return table[i][1]; + + return -EINVAL; +} + +static int spi_nor_hwcaps_read2cmd(u32 hwcaps) +{ + static const int hwcaps_read2cmd[][2] = { + { SNOR_HWCAPS_READ, SNOR_CMD_READ }, + { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST }, + { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR }, + { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 }, + { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 }, + { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 }, + { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR }, + { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 }, + { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 }, + { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 }, + { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR }, + { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 }, + { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 }, + { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 }, + { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR }, + }; + + return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd, + ARRAY_SIZE(hwcaps_read2cmd)); +} + +static int spi_nor_hwcaps_pp2cmd(u32 hwcaps) +{ + static const int hwcaps_pp2cmd[][2] = { + { SNOR_HWCAPS_PP, SNOR_CMD_PP }, + { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 }, + { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 }, + { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 }, + { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 }, + { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 }, + { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 }, + }; + + return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd, + ARRAY_SIZE(hwcaps_pp2cmd)); +} + +static int spi_nor_select_read(struct spi_nor *nor, + const struct spi_nor_flash_parameter *params, + u32 shared_hwcaps) +{ + int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1; + const struct spi_nor_read_command *read; + + if (best_match < 0) + return -EINVAL; + + cmd = spi_nor_hwcaps_read2cmd(BIT(best_match)); + if (cmd < 0) + return -EINVAL; + + read = ¶ms->reads[cmd]; + nor->read_opcode = read->opcode; + nor->read_proto = read->proto; + + /* + * In the spi-nor framework, we don't need to make the difference + * between mode clock cycles and wait state clock cycles. + * Indeed, the value of the mode clock cycles is used by a QSPI + * flash memory to know whether it should enter or leave its 0-4-4 + * (Continuous Read / XIP) mode. + * eXecution In Place is out of the scope of the mtd sub-system. + * Hence we choose to merge both mode and wait state clock cycles + * into the so called dummy clock cycles. + */ + nor->read_dummy = read->num_mode_clocks + read->num_wait_states; + return 0; +} + +static int spi_nor_select_pp(struct spi_nor *nor, + const struct spi_nor_flash_parameter *params, + u32 shared_hwcaps) +{ + int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1; + const struct spi_nor_pp_command *pp; + + if (best_match < 0) + return -EINVAL; + + cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match)); + if (cmd < 0) + return -EINVAL; + + pp = ¶ms->page_programs[cmd]; + nor->program_opcode = pp->opcode; + nor->write_proto = pp->proto; + return 0; +} + +static int spi_nor_select_erase(struct spi_nor *nor, + const struct flash_info *info) +{ + struct mtd_info *mtd = &nor->mtd; + +#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS + /* prefer "small sector" erase if possible */ + if (info->flags & SECT_4K) { + nor->erase_opcode = SPINOR_OP_BE_4K; + mtd->erasesize = 4096; + } else if (info->flags & SECT_4K_PMC) { + nor->erase_opcode = SPINOR_OP_BE_4K_PMC; + mtd->erasesize = 4096; + } else +#endif + { + nor->erase_opcode = SPINOR_OP_SE; + mtd->erasesize = info->sector_size; + } + return 0; +} + +static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info, + const struct spi_nor_flash_parameter *params, + const struct spi_nor_hwcaps *hwcaps) +{ + u32 ignored_mask, shared_mask; + bool enable_quad_io; + int err; + + /* + * Keep only the hardware capabilities supported by both the SPI + * controller and the SPI flash memory. + */ + shared_mask = hwcaps->mask & params->hwcaps.mask; + + /* SPI n-n-n protocols are not supported yet. */ + ignored_mask = (SNOR_HWCAPS_READ_2_2_2 | + SNOR_HWCAPS_READ_4_4_4 | + SNOR_HWCAPS_READ_8_8_8 | + SNOR_HWCAPS_PP_4_4_4 | + SNOR_HWCAPS_PP_8_8_8); + if (shared_mask & ignored_mask) { + dev_dbg(nor->dev, + "SPI n-n-n protocols are not supported yet.\n"); + shared_mask &= ~ignored_mask; + } + + /* Select the (Fast) Read command. */ + err = spi_nor_select_read(nor, params, shared_mask); + if (err) { + dev_err(nor->dev, + "can't select read settings supported by both the SPI controller and memory.\n"); + return err; + } + + /* Select the Page Program command. */ + err = spi_nor_select_pp(nor, params, shared_mask); + if (err) { + dev_err(nor->dev, + "can't select write settings supported by both the SPI controller and memory.\n"); + return err; + } + + /* Select the Sector Erase command. */ + err = spi_nor_select_erase(nor, info); + if (err) { + dev_err(nor->dev, + "can't select erase settings supported by both the SPI controller and memory.\n"); + return err; + } + + /* Enable Quad I/O if needed. */ + enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 || + spi_nor_get_protocol_width(nor->write_proto) == 4); + if (enable_quad_io && params->quad_enable) { + err = params->quad_enable(nor); + if (err) { + dev_err(nor->dev, "quad mode not supported\n"); + return err; + } + } + + return 0; +} + +int spi_nor_scan(struct spi_nor *nor, const char *name, + const struct spi_nor_hwcaps *hwcaps) +{ + struct spi_nor_flash_parameter params; const struct flash_info *info = NULL; struct device *dev = nor->dev; struct mtd_info *mtd = &nor->mtd; @@ -1549,6 +1854,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (ret) return ret; + /* Reset SPI protocol for all commands. */ + nor->reg_proto = SNOR_PROTO_1_1_1; + nor->read_proto = SNOR_PROTO_1_1_1; + nor->write_proto = SNOR_PROTO_1_1_1; + if (name) info = spi_nor_match_id(name); /* Try to auto-detect if chip name wasn't specified or not found */ @@ -1591,6 +1901,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (info->flags & SPI_S3AN) nor->flags |= SNOR_F_READY_XSR_RDY; + /* Parse the Serial Flash Discoverable Parameters table. */ + ret = spi_nor_init_params(nor, info, ¶ms); + if (ret) + return ret; + /* * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up * with the software protection bits set @@ -1611,7 +1926,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) mtd->type = MTD_NORFLASH; mtd->writesize = 1; mtd->flags = MTD_CAP_NORFLASH; - mtd->size = info->sector_size * info->n_sectors; + mtd->size = params.size; mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; @@ -1642,75 +1957,38 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (info->flags & NO_CHIP_ERASE) nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; -#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS - /* prefer "small sector" erase if possible */ - if (info->flags & SECT_4K) { - nor->erase_opcode = SPINOR_OP_BE_4K; - mtd->erasesize = 4096; - } else if (info->flags & SECT_4K_PMC) { - nor->erase_opcode = SPINOR_OP_BE_4K_PMC; - mtd->erasesize = 4096; - } else -#endif - { - nor->erase_opcode = SPINOR_OP_SE; - mtd->erasesize = info->sector_size; - } - if (info->flags & SPI_NOR_NO_ERASE) mtd->flags |= MTD_NO_ERASE; mtd->dev.parent = dev; - nor->page_size = info->page_size; + nor->page_size = params.page_size; mtd->writebufsize = nor->page_size; if (np) { /* If we were instantiated by DT, use it */ if (of_property_read_bool(np, "m25p,fast-read")) - nor->flash_read = SPI_NOR_FAST; + params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; else - nor->flash_read = SPI_NOR_NORMAL; + params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; } else { /* If we weren't instantiated by DT, default to fast-read */ - nor->flash_read = SPI_NOR_FAST; + params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; } /* Some devices cannot do fast-read, no matter what DT tells us */ if (info->flags & SPI_NOR_NO_FR) - nor->flash_read = SPI_NOR_NORMAL; - - /* Quad/Dual-read mode takes precedence over fast/normal */ - if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { - ret = set_quad_mode(nor, info); - if (ret) { - dev_err(dev, "quad mode not supported\n"); - return ret; - } - nor->flash_read = SPI_NOR_QUAD; - } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) { - nor->flash_read = SPI_NOR_DUAL; - } - - /* Default commands */ - switch (nor->flash_read) { - case SPI_NOR_QUAD: - nor->read_opcode = SPINOR_OP_READ_1_1_4; - break; - case SPI_NOR_DUAL: - nor->read_opcode = SPINOR_OP_READ_1_1_2; - break; - case SPI_NOR_FAST: - nor->read_opcode = SPINOR_OP_READ_FAST; - break; - case SPI_NOR_NORMAL: - nor->read_opcode = SPINOR_OP_READ; - break; - default: - dev_err(dev, "No Read opcode defined\n"); - return -EINVAL; - } + params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; - nor->program_opcode = SPINOR_OP_PP; + /* + * Configure the SPI memory: + * - select op codes for (Fast) Read, Page Program and Sector Erase. + * - set the number of dummy cycles (mode cycles + wait states). + * - set the SPI protocols for register and memory accesses. + * - set the Quad Enable bit if needed (required by SPI x-y-4 protos). + */ + ret = spi_nor_setup(nor, info, ¶ms, hwcaps); + if (ret) + return ret; if (info->addr_width) nor->addr_width = info->addr_width; @@ -1732,8 +2010,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) return -EINVAL; } - nor->read_dummy = spi_nor_read_dummy_cycles(nor); - if (info->flags & SPI_S3AN) { ret = s3an_nor_scan(info, nor); if (ret) diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c index 116a4c54a8e2..90d9152ddf98 100644 --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ b/drivers/mtd/spi-nor/stm32-quadspi.c @@ -192,15 +192,15 @@ static void stm32_qspi_set_framemode(struct spi_nor *nor, cmd->framemode = CCR_IMODE_1; if (read) { - switch (nor->flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + switch (nor->read_proto) { + default: + case SNOR_PROTO_1_1_1: dmode = CCR_DMODE_1; break; - case SPI_NOR_DUAL: + case SNOR_PROTO_1_1_2: dmode = CCR_DMODE_2; break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_4: dmode = CCR_DMODE_4; break; } @@ -480,7 +480,12 @@ static void stm32_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, struct device_node *np) { - u32 width, flash_read, presc, cs_num, max_rate = 0; + struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; + u32 width, presc, cs_num, max_rate = 0; struct stm32_qspi_flash *flash; struct mtd_info *mtd; int ret; @@ -499,12 +504,10 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, width = 1; if (width == 4) - flash_read = SPI_NOR_QUAD; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; else if (width == 2) - flash_read = SPI_NOR_DUAL; - else if (width == 1) - flash_read = SPI_NOR_NORMAL; - else + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; + else if (width != 1) return -EINVAL; flash = &qspi->flash[cs_num]; @@ -539,7 +542,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, */ flash->fsize = FSIZE_VAL(SZ_1K); - ret = spi_nor_scan(&flash->nor, NULL, flash_read); + ret = spi_nor_scan(&flash->nor, NULL, &hwcaps); if (ret) { dev_err(qspi->dev, "device scan failed\n"); return ret; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index f2a718030476..73b50efc4fc9 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -73,6 +73,15 @@ #define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */ #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */ +/* Double Transfer Rate opcodes - defined in JEDEC JESD216B. */ +#define SPINOR_OP_READ_1_1_1_DTR 0x0d +#define SPINOR_OP_READ_1_2_2_DTR 0xbd +#define SPINOR_OP_READ_1_4_4_DTR 0xed + +#define SPINOR_OP_READ_1_1_1_DTR_4B 0x0e +#define SPINOR_OP_READ_1_2_2_DTR_4B 0xbe +#define SPINOR_OP_READ_1_4_4_DTR_4B 0xee + /* Used for SST flashes only. */ #define SPINOR_OP_BP 0x02 /* Byte program */ #define SPINOR_OP_WRDI 0x04 /* Write disable */ @@ -119,13 +128,77 @@ /* Configuration Register bits. */ #define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */ -enum read_mode { - SPI_NOR_NORMAL = 0, - SPI_NOR_FAST, - SPI_NOR_DUAL, - SPI_NOR_QUAD, + +/* Supported SPI protocols */ +#define SNOR_PROTO_INST_MASK GENMASK(23, 16) +#define SNOR_PROTO_INST_SHIFT 16 +#define SNOR_PROTO_INST(_nbits) \ + ((((u32)(_nbits)) << SNOR_PROTO_INST_SHIFT) & SNOR_PROTO_INST_MASK) + +#define SNOR_PROTO_ADDR_MASK GENMASK(15, 8) +#define SNOR_PROTO_ADDR_SHIFT 8 +#define SNOR_PROTO_ADDR(_nbits) \ + ((((u32)(_nbits)) << SNOR_PROTO_ADDR_SHIFT) & SNOR_PROTO_ADDR_MASK) + +#define SNOR_PROTO_DATA_MASK GENMASK(7, 0) +#define SNOR_PROTO_DATA_SHIFT 0 +#define SNOR_PROTO_DATA(_nbits) \ + ((((u32)(_nbits)) << SNOR_PROTO_DATA_SHIFT) & SNOR_PROTO_DATA_MASK) + +#define SNOR_PROTO_IS_DTR BIT(17) /* Double Transfer Rate */ + +#define SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits) \ + (SNOR_PROTO_INST(_inst_nbits) | \ + SNOR_PROTO_ADDR(_addr_nbits) | \ + SNOR_PROTO_DATA(_data_nbits)) +#define SNOR_PROTO_DTR(_inst_nbits, _addr_nbits, _data_nbits) \ + (SNOR_PROTO_IS_DTR | \ + SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits)) + +enum spi_nor_protocol { + SNOR_PROTO_1_1_1 = SNOR_PROTO_STR(1, 1, 1), + SNOR_PROTO_1_1_2 = SNOR_PROTO_STR(1, 1, 2), + SNOR_PROTO_1_1_4 = SNOR_PROTO_STR(1, 1, 4), + SNOR_PROTO_1_1_8 = SNOR_PROTO_STR(1, 1, 8), + SNOR_PROTO_1_2_2 = SNOR_PROTO_STR(1, 2, 2), + SNOR_PROTO_1_4_4 = SNOR_PROTO_STR(1, 4, 4), + SNOR_PROTO_1_8_8 = SNOR_PROTO_STR(1, 8, 8), + SNOR_PROTO_2_2_2 = SNOR_PROTO_STR(2, 2, 2), + SNOR_PROTO_4_4_4 = SNOR_PROTO_STR(4, 4, 4), + SNOR_PROTO_8_8_8 = SNOR_PROTO_STR(8, 8, 8), + + SNOR_PROTO_1_1_1_DTR = SNOR_PROTO_DTR(1, 1, 1), + SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2), + SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4), + SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8), }; +static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto) +{ + return (proto & SNOR_PROTO_IS_DTR) == SNOR_PROTO_IS_DTR; +} + +static inline u8 spi_nor_get_protocol_inst_nbits(enum spi_nor_protocol proto) +{ + return ((u32)(proto & SNOR_PROTO_INST_MASK)) >> SNOR_PROTO_INST_SHIFT; +} + +static inline u8 spi_nor_get_protocol_addr_nbits(enum spi_nor_protocol proto) +{ + return ((u32)(proto & SNOR_PROTO_ADDR_MASK)) >> SNOR_PROTO_ADDR_SHIFT; +} + +static inline u8 spi_nor_get_protocol_data_nbits(enum spi_nor_protocol proto) +{ + return ((u32)(proto & SNOR_PROTO_DATA_MASK)) >> SNOR_PROTO_DATA_SHIFT; +} + +static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto) +{ + return spi_nor_get_protocol_data_nbits(proto); +} + + #define SPI_NOR_MAX_CMD_SIZE 8 enum spi_nor_ops { SPI_NOR_OPS_READ = 0, @@ -154,9 +227,11 @@ enum spi_nor_option_flags { * @read_opcode: the read opcode * @read_dummy: the dummy needed by the read operation * @program_opcode: the program opcode - * @flash_read: the mode of the read * @sst_write_second: used by the SST write operation * @flags: flag options for the current SPI-NOR (SNOR_F_*) + * @read_proto: the SPI protocol for read operations + * @write_proto: the SPI protocol for write operations + * @reg_proto the SPI protocol for read_reg/write_reg/erase operations * @cmd_buf: used by the write_reg * @prepare: [OPTIONAL] do some preparations for the * read/write/erase/lock/unlock operations @@ -185,7 +260,9 @@ struct spi_nor { u8 read_opcode; u8 read_dummy; u8 program_opcode; - enum read_mode flash_read; + enum spi_nor_protocol read_proto; + enum spi_nor_protocol write_proto; + enum spi_nor_protocol reg_proto; bool sst_write_second; u32 flags; u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; @@ -219,11 +296,73 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) return mtd_get_of_node(&nor->mtd); } + +/** + * struct spi_nor_hwcaps - Structure for describing the hardware capabilies + * supported by the SPI controller (bus master). + * @mask: the bitmask listing all the supported hw capabilies + */ +struct spi_nor_hwcaps { + u32 mask; +}; + +/* + *(Fast) Read capabilities. + * MUST be ordered by priority: the higher bit position, the higher priority. + * As a matter of performances, it is relevant to use Octo SPI protocols first, + * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly + * (Slow) Read. + */ +#define SNOR_HWCAPS_READ_MASK GENMASK(15, 0) +#define SNOR_HWCAPS_READ BIT(0) +#define SNOR_HWCAPS_READ_FAST BIT(1) +#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2) + +#define SNOR_HWCAPS_READ_DUAL GENMASK(7, 4) +#define SNOR_HWCAPS_READ_1_1_2 BIT(4) +#define SNOR_HWCAPS_READ_1_2_2 BIT(5) +#define SNOR_HWCAPS_READ_2_2_2 BIT(6) +#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(7) + +#define SNOR_HWCAPS_READ_QUAD GENMASK(11, 8) +#define SNOR_HWCAPS_READ_1_1_4 BIT(8) +#define SNOR_HWCAPS_READ_1_4_4 BIT(9) +#define SNOR_HWCAPS_READ_4_4_4 BIT(10) +#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(11) + +#define SNOR_HWCPAS_READ_OCTO GENMASK(15, 12) +#define SNOR_HWCAPS_READ_1_1_8 BIT(12) +#define SNOR_HWCAPS_READ_1_8_8 BIT(13) +#define SNOR_HWCAPS_READ_8_8_8 BIT(14) +#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(15) + +/* + * Page Program capabilities. + * MUST be ordered by priority: the higher bit position, the higher priority. + * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the + * legacy SPI 1-1-1 protocol. + * Note that Dual Page Programs are not supported because there is no existing + * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory + * implements such commands. + */ +#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16) +#define SNOR_HWCAPS_PP BIT(16) + +#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) +#define SNOR_HWCAPS_PP_1_1_4 BIT(17) +#define SNOR_HWCAPS_PP_1_4_4 BIT(18) +#define SNOR_HWCAPS_PP_4_4_4 BIT(19) + +#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20) +#define SNOR_HWCAPS_PP_1_1_8 BIT(20) +#define SNOR_HWCAPS_PP_1_8_8 BIT(21) +#define SNOR_HWCAPS_PP_8_8_8 BIT(22) + /** * spi_nor_scan() - scan the SPI NOR * @nor: the spi_nor structure * @name: the chip type name - * @mode: the read mode supported by the driver + * @hwcaps: the hardware capabilities supported by the controller driver * * The drivers can use this fuction to scan the SPI NOR. * In the scanning, it will try to get all the necessary information to @@ -233,6 +372,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) * * Return: 0 for success, others for failure. */ -int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode); +int spi_nor_scan(struct spi_nor *nor, const char *name, + const struct spi_nor_hwcaps *hwcaps); #endif -- 2.9.3