Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030790AbdDSSda (ORCPT ); Wed, 19 Apr 2017 14:33:30 -0400 Received: from david.siemens.de ([192.35.17.14]:46681 "EHLO david.siemens.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S968979AbdDSSdY (ORCPT ); Wed, 19 Apr 2017 14:33:24 -0400 From: Jan Kiszka To: Matt Fleming , Ard Biesheuvel Cc: linux-efi@vger.kernel.org, Linux Kernel Mailing List , Andy Shevchenko , "Bryan O'Donoghue" , Hock Leong Kweh , Borislav Petkov , Sascha Weisenberger Subject: [PATCH v2 3/3] efi/capsule: Add support for Quark security header Date: Wed, 19 Apr 2017 20:33:02 +0200 Message-Id: X-Mailer: git-send-email 2.12.0 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6473 Lines: 196 The firmware for Quark X102x prepends a security header to the capsule which is needed to support the mandatory secure boot on this processor. The header can be detected by checking for the "_CSH" signature and - to avoid any GUID conflict - validating its size field to contain the expected value. Then we need to look for the EFI header right after the security header and pass the real header to __efi_capsule_setup_info. To be minimal invasive and maximal safe, the quirk version of efi_capsule_identify_image is only effective on Quark processors. Signed-off-by: Jan Kiszka --- arch/x86/platform/efi/quirks.c | 137 +++++++++++++++++++++++++++++++++++++++++ drivers/firmware/efi/Kconfig | 9 +++ 2 files changed, 146 insertions(+) diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c index cdfe8c628959..8f41a75f8604 100644 --- a/arch/x86/platform/efi/quirks.c +++ b/arch/x86/platform/efi/quirks.c @@ -13,12 +13,66 @@ #include #include #include +#include #define EFI_MIN_RESERVE 5120 #define EFI_DUMMY_GUID \ EFI_GUID(0x4424ac57, 0xbe4b, 0x47dd, 0x9e, 0x97, 0xed, 0x50, 0xf0, 0x9f, 0x92, 0xa9) +#define QUARK_CSH_SIGNATURE 0x5f435348 /* _CSH */ +#define QUARK_SECURITY_HEADER_SIZE 0x400 + +/* + * Header prepended to the standard EFI capsule on Quark systems the are based + * on Intel firmware BSP. + * @csh_signature: Unique identifier to sanity check signed module + * presence ("_CSH"). + * @version: Current version of CSH used. Should be one for Quark A0. + * @modulesize: Size of the entire module including the module header + * and payload. + * @security_version_number_index: Index of SVN to use for validation of signed + * module. + * @security_version_number: Used to prevent against roll back of modules. + * @rsvd_module_id: Currently unused for Clanton (Quark). + * @rsvd_module_vendor: Vendor Identifier. For Intel products value is + * 0x00008086. + * @rsvd_date: BCD representation of build date as yyyymmdd, where + * yyyy=4 digit year, mm=1-12, dd=1-31. + * @headersize: Total length of the header including including any + * padding optionally added by the signing tool. + * @hash_algo: What Hash is used in the module signing. + * @cryp_algo: What Crypto is used in the module signing. + * @keysize: Total length of the key data including including any + * padding optionally added by the signing tool. + * @signaturesize: Total length of the signature including including any + * padding optionally added by the signing tool. + * @rsvd_next_header: 32-bit pointer to the next Secure Boot Module in the + * chain, if there is a next header. + * @rsvd: Reserved, padding structure to required size. + * + * See also QuartSecurityHeader_t in + * Quark_EDKII_v1.2.1.1/QuarkPlatformPkg/Include/QuarkBootRom.h + * from https://downloadcenter.intel.com/download/23197/Intel-Quark-SoC-X1000-Board-Support-Package-BSP + */ +struct quark_security_header { + u32 csh_signature; + u32 version; + u32 modulesize; + u32 security_version_number_index; + u32 security_version_number; + u32 rsvd_module_id; + u32 rsvd_module_vendor; + u32 rsvd_date; + u32 headersize; + u32 hash_algo; + u32 cryp_algo; + u32 keysize; + u32 signaturesize; + u32 rsvd_next_header; + u32 rsvd[2]; +}; + static efi_char16_t efi_dummy_name[6] = { 'D', 'U', 'M', 'M', 'Y', 0 }; static bool efi_no_storage_paranoia; @@ -499,3 +553,86 @@ bool efi_poweroff_required(void) { return acpi_gbl_reduced_hardware || acpi_no_s5; } + +#ifdef CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH + +static int qrk_capsule_setup_info(struct capsule_info *cap_info, void **pkbuff, + size_t hdr_bytes) +{ + struct quark_security_header *csh = *pkbuff; + + /* Only process data block that is larger than the security header */ + if (hdr_bytes < sizeof(struct quark_security_header)) + return 0; + + if (csh->csh_signature != QUARK_CSH_SIGNATURE || + csh->headersize != QUARK_SECURITY_HEADER_SIZE) + return 1; + + /* Only process data block if EFI header is included */ + if (hdr_bytes < QUARK_SECURITY_HEADER_SIZE + + sizeof(efi_capsule_header_t)) + return 0; + + pr_debug("Quark security header detected\n"); + + if (csh->rsvd_next_header != 0) { + pr_err("multiple Quark security headers not supported\n"); + return -EINVAL; + } + + *pkbuff += csh->headersize; + cap_info->total_size = csh->headersize; + + /* + * Update the first page pointer to skip over the CSH header. + */ + cap_info->pages[0] += csh->headersize; + + return 1; +} + +#define ICPU(family, model, quirk_handler) \ + { X86_VENDOR_INTEL, family, model, X86_FEATURE_ANY, \ + (unsigned long)&quirk_handler } + +static const struct x86_cpu_id efi_capsule_quirk_ids[] = { + ICPU(5, 9, qrk_capsule_setup_info), /* Intel Quark X1000 */ + { } +}; + +int efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff, + size_t hdr_bytes) +{ + int (*quirk_handler)(struct capsule_info *, void **, size_t); + const struct x86_cpu_id *id; + int ret; + + if (hdr_bytes < sizeof(efi_capsule_header_t)) + return 0; + + cap_info->total_size = 0; + + id = x86_match_cpu(efi_capsule_quirk_ids); + if (id) { + /* + * The quirk handler is supposed to return + * - a value > 0 if the setup should continue, after advancing + * kbuff as needed + * - 0 if not enough hdr_bytes are available yet + * - a negative error code otherwise + */ + quirk_handler = (typeof(quirk_handler))id->driver_data; + ret = quirk_handler(cap_info, &kbuff, hdr_bytes); + if (ret <= 0) + return ret; + } + + memcpy(&cap_info->header, kbuff, sizeof(cap_info->header)); + + cap_info->total_size += cap_info->header.imagesize; + + return __efi_capsule_setup_info(cap_info); +} + +#endif diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig index 2e78b0b96d74..394db40ed374 100644 --- a/drivers/firmware/efi/Kconfig +++ b/drivers/firmware/efi/Kconfig @@ -112,6 +112,15 @@ config EFI_CAPSULE_LOADER Most users should say N. +config EFI_CAPSULE_QUIRK_QUARK_CSH + boolean "Add support for Quark capsules with non-standard headers" + depends on X86 && !64BIT + select EFI_CAPSULE_LOADER + default y + help + Add support for processing Quark X1000 EFI capsules, whose header + layout deviates from the layout mandated by the UEFI specification. + config EFI_TEST tristate "EFI Runtime Service Tests Support" depends on EFI -- 2.12.0