Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1033087AbdDTQJf (ORCPT ); Thu, 20 Apr 2017 12:09:35 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:38731 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S971011AbdDTQIQ (ORCPT ); Thu, 20 Apr 2017 12:08:16 -0400 From: Hugues Fruchet To: Rob Herring , Mark Rutland , Maxime Coquelin , Alexandre Torgue , Mauro Carvalho Chehab , Hans Verkuil CC: , , , , Benjamin Gaignard , Yannick Fertre , Hugues Fruchet Subject: [PATCH v4 2/8] [media] stm32-dcmi: STM32 DCMI camera interface driver Date: Thu, 20 Apr 2017 18:07:19 +0200 Message-ID: <1492704445-22186-3-git-send-email-hugues.fruchet@st.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1492704445-22186-1-git-send-email-hugues.fruchet@st.com> References: <1492704445-22186-1-git-send-email-hugues.fruchet@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.201.23.73] X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-04-20_15:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38592 Lines: 1485 This V4L2 subdev driver enables Digital Camera Memory Interface (DCMI) of STMicroelectronics STM32 SoC series. Reviewed-by: Hans Verkuil Signed-off-by: Yannick Fertre Signed-off-by: Hugues Fruchet --- drivers/media/platform/Kconfig | 12 + drivers/media/platform/Makefile | 2 + drivers/media/platform/stm32/Makefile | 1 + drivers/media/platform/stm32/stm32-dcmi.c | 1419 +++++++++++++++++++++++++++++ 4 files changed, 1434 insertions(+) create mode 100644 drivers/media/platform/stm32/Makefile create mode 100644 drivers/media/platform/stm32/stm32-dcmi.c diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index ac026ee..de6e18b 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -114,6 +114,18 @@ config VIDEO_S3C_CAMIF To compile this driver as a module, choose M here: the module will be called s3c-camif. +config VIDEO_STM32_DCMI + tristate "Digital Camera Memory Interface (DCMI) support" + depends on VIDEO_V4L2 && OF && HAS_DMA + depends on ARCH_STM32 || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + ---help--- + This module makes the STM32 Digital Camera Memory Interface (DCMI) + available as a v4l2 device. + + To compile this driver as a module, choose M here: the module + will be called stm32-dcmi. + source "drivers/media/platform/soc_camera/Kconfig" source "drivers/media/platform/exynos4-is/Kconfig" source "drivers/media/platform/am437x/Kconfig" diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 63303d6..231f3c2 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -68,6 +68,8 @@ obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/ obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/ +obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/ + ccflags-y += -I$(srctree)/drivers/media/i2c obj-$(CONFIG_VIDEO_MEDIATEK_VPU) += mtk-vpu/ diff --git a/drivers/media/platform/stm32/Makefile b/drivers/media/platform/stm32/Makefile new file mode 100644 index 0000000..9b606a7 --- /dev/null +++ b/drivers/media/platform/stm32/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c new file mode 100644 index 0000000..0ed3bd9 --- /dev/null +++ b/drivers/media/platform/stm32/stm32-dcmi.c @@ -0,0 +1,1419 @@ +/* + * Driver for STM32 Digital Camera Memory Interface + * + * Copyright (C) STMicroelectronics SA 2017 + * Authors: Yannick Fertre + * Hugues Fruchet + * for STMicroelectronics. + * License terms: GNU General Public License (GPL), version 2 + * + * This driver is based on atmel_isi.c + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "stm32-dcmi" + +/* Registers offset for DCMI */ +#define DCMI_CR 0x00 /* Control Register */ +#define DCMI_SR 0x04 /* Status Register */ +#define DCMI_RIS 0x08 /* Raw Interrupt Status register */ +#define DCMI_IER 0x0C /* Interrupt Enable Register */ +#define DCMI_MIS 0x10 /* Masked Interrupt Status register */ +#define DCMI_ICR 0x14 /* Interrupt Clear Register */ +#define DCMI_ESCR 0x18 /* Embedded Synchronization Code Register */ +#define DCMI_ESUR 0x1C /* Embedded Synchronization Unmask Register */ +#define DCMI_CWSTRT 0x20 /* Crop Window STaRT */ +#define DCMI_CWSIZE 0x24 /* Crop Window SIZE */ +#define DCMI_DR 0x28 /* Data Register */ +#define DCMI_IDR 0x2C /* IDentifier Register */ + +/* Bits definition for control register (DCMI_CR) */ +#define CR_CAPTURE BIT(0) +#define CR_CM BIT(1) +#define CR_CROP BIT(2) +#define CR_JPEG BIT(3) +#define CR_ESS BIT(4) +#define CR_PCKPOL BIT(5) +#define CR_HSPOL BIT(6) +#define CR_VSPOL BIT(7) +#define CR_FCRC_0 BIT(8) +#define CR_FCRC_1 BIT(9) +#define CR_EDM_0 BIT(10) +#define CR_EDM_1 BIT(11) +#define CR_ENABLE BIT(14) + +/* Bits definition for status register (DCMI_SR) */ +#define SR_HSYNC BIT(0) +#define SR_VSYNC BIT(1) +#define SR_FNE BIT(2) + +/* + * Bits definition for interrupt registers + * (DCMI_RIS, DCMI_IER, DCMI_MIS, DCMI_ICR) + */ +#define IT_FRAME BIT(0) +#define IT_OVR BIT(1) +#define IT_ERR BIT(2) +#define IT_VSYNC BIT(3) +#define IT_LINE BIT(4) + +enum state { + STOPPED = 0, + RUNNING, + STOPPING, +}; + +#define MAX_BUS_WIDTH 14 +#define MAX_SUPPORT_WIDTH 2048 +#define MAX_SUPPORT_HEIGHT 2048 +#define MIN_SUPPORT_WIDTH 16 +#define MIN_SUPPORT_HEIGHT 16 +#define TIMEOUT_MS 1000 + +struct dcmi_graph_entity { + struct device_node *node; + + struct v4l2_async_subdev asd; + struct v4l2_subdev *subdev; +}; + +struct dcmi_format { + u32 fourcc; + u32 mbus_code; + u8 bpp; +}; + +struct dcmi_buf { + struct vb2_v4l2_buffer vb; + bool prepared; + dma_addr_t paddr; + size_t size; + struct list_head list; +}; + +struct stm32_dcmi { + /* Protects the access of variables shared within the interrupt */ + spinlock_t irqlock; + struct device *dev; + void __iomem *regs; + struct resource *res; + struct reset_control *rstc; + int sequence; + struct list_head buffers; + struct dcmi_buf *active; + + struct v4l2_device v4l2_dev; + struct video_device *vdev; + struct v4l2_async_notifier notifier; + struct dcmi_graph_entity entity; + struct v4l2_format fmt; + + const struct dcmi_format **user_formats; + unsigned int num_user_formats; + const struct dcmi_format *current_fmt; + + /* Protect this data structure */ + struct mutex lock; + struct vb2_queue queue; + + struct v4l2_of_bus_parallel bus; + struct completion complete; + struct clk *mclk; + enum state state; + struct dma_chan *dma_chan; + dma_cookie_t dma_cookie; + u32 misr; + int errors_count; + int buffers_count; +}; + +static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n) +{ + return container_of(n, struct stm32_dcmi, notifier); +} + +static inline u32 reg_read(void __iomem *base, u32 reg) +{ + return readl_relaxed(base + reg); +} + +static inline void reg_write(void __iomem *base, u32 reg, u32 val) +{ + writel_relaxed(val, base + reg); +} + +static inline void reg_set(void __iomem *base, u32 reg, u32 mask) +{ + reg_write(base, reg, reg_read(base, reg) | mask); +} + +static inline void reg_clear(void __iomem *base, u32 reg, u32 mask) +{ + reg_write(base, reg, reg_read(base, reg) & ~mask); +} + +static int dcmi_start_capture(struct stm32_dcmi *dcmi); + +static void dcmi_dma_callback(void *param) +{ + struct stm32_dcmi *dcmi = (struct stm32_dcmi *)param; + struct dma_chan *chan = dcmi->dma_chan; + struct dma_tx_state state; + enum dma_status status; + + spin_lock(&dcmi->irqlock); + + /* Check DMA status */ + status = dmaengine_tx_status(chan, dcmi->dma_cookie, &state); + + switch (status) { + case DMA_IN_PROGRESS: + dev_dbg(dcmi->dev, "%s: Received DMA_IN_PROGRESS\n", __func__); + break; + case DMA_PAUSED: + dev_err(dcmi->dev, "%s: Received DMA_PAUSED\n", __func__); + break; + case DMA_ERROR: + dev_err(dcmi->dev, "%s: Received DMA_ERROR\n", __func__); + break; + case DMA_COMPLETE: + dev_dbg(dcmi->dev, "%s: Received DMA_COMPLETE\n", __func__); + + if (dcmi->active) { + struct dcmi_buf *buf = dcmi->active; + struct vb2_v4l2_buffer *vbuf = &dcmi->active->vb; + + vbuf->sequence = dcmi->sequence++; + vbuf->field = V4L2_FIELD_NONE; + vbuf->vb2_buf.timestamp = ktime_get_ns(); + vb2_set_plane_payload(&vbuf->vb2_buf, 0, buf->size); + vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE); + dev_dbg(dcmi->dev, "buffer[%d] done seq=%d\n", + vbuf->vb2_buf.index, vbuf->sequence); + + dcmi->buffers_count++; + dcmi->active = NULL; + } + + /* Restart a new DMA transfer with next buffer */ + if (dcmi->state == RUNNING) { + int ret; + + if (list_empty(&dcmi->buffers)) { + dev_err(dcmi->dev, "%s: No more buffer queued, cannot capture buffer", + __func__); + dcmi->errors_count++; + dcmi->active = NULL; + + spin_unlock(&dcmi->irqlock); + return; + } + + dcmi->active = list_entry(dcmi->buffers.next, + struct dcmi_buf, list); + + list_del_init(&dcmi->active->list); + + ret = dcmi_start_capture(dcmi); + if (ret) { + dev_err(dcmi->dev, "%s: Cannot restart capture on DMA complete", + __func__); + + spin_unlock(&dcmi->irqlock); + return; + } + + /* Enable capture */ + reg_set(dcmi->regs, DCMI_CR, CR_CAPTURE); + } + + break; + default: + dev_err(dcmi->dev, "%s: Received unknown status\n", __func__); + break; + } + + spin_unlock(&dcmi->irqlock); +} + +static int dcmi_start_dma(struct stm32_dcmi *dcmi, + struct dcmi_buf *buf) +{ + struct dma_async_tx_descriptor *desc = NULL; + struct dma_slave_config config; + int ret; + + memset(&config, 0, sizeof(config)); + + config.src_addr = (dma_addr_t)dcmi->res->start + DCMI_DR; + config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + config.dst_maxburst = 4; + + /* Configure DMA channel */ + ret = dmaengine_slave_config(dcmi->dma_chan, &config); + if (ret < 0) { + dev_err(dcmi->dev, "%s: DMA channel config failed (%d)\n", + __func__, ret); + return ret; + } + + /* Prepare a DMA transaction */ + desc = dmaengine_prep_slave_single(dcmi->dma_chan, buf->paddr, + buf->size, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(dcmi->dev, "%s: DMA dmaengine_prep_slave_single failed for buffer size %zu\n", + __func__, buf->size); + return -EINVAL; + } + + /* Set completion callback routine for notification */ + desc->callback = dcmi_dma_callback; + desc->callback_param = dcmi; + + /* Push current DMA transaction in the pending queue */ + dcmi->dma_cookie = dmaengine_submit(desc); + + dma_async_issue_pending(dcmi->dma_chan); + + return 0; +} + +static int dcmi_start_capture(struct stm32_dcmi *dcmi) +{ + int ret; + struct dcmi_buf *buf = dcmi->active; + + if (!buf) + return -EINVAL; + + ret = dcmi_start_dma(dcmi, buf); + if (ret) { + dcmi->errors_count++; + return ret; + } + + /* Enable capture */ + reg_set(dcmi->regs, DCMI_CR, CR_CAPTURE); + + return 0; +} + +static irqreturn_t dcmi_irq_thread(int irq, void *arg) +{ + struct stm32_dcmi *dcmi = arg; + int ret; + + spin_lock(&dcmi->irqlock); + + /* Stop capture is required */ + if (dcmi->state == STOPPING) { + reg_clear(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR); + + dcmi->state = STOPPED; + + complete(&dcmi->complete); + + spin_unlock(&dcmi->irqlock); + return IRQ_HANDLED; + } + + if ((dcmi->misr & IT_OVR) || (dcmi->misr & IT_ERR)) { + /* + * An overflow or an error has been detected, + * stop current DMA transfert & restart it + */ + dev_warn(dcmi->dev, "%s: Overflow or error detected\n", + __func__); + + dcmi->errors_count++; + dmaengine_terminate_all(dcmi->dma_chan); + + reg_set(dcmi->regs, DCMI_ICR, IT_FRAME | IT_OVR | IT_ERR); + + dev_dbg(dcmi->dev, "Restarting capture after DCMI error\n"); + + ret = dcmi_start_capture(dcmi); + if (ret) { + dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n", + __func__); + + spin_unlock(&dcmi->irqlock); + return IRQ_HANDLED; + } + } + + spin_unlock(&dcmi->irqlock); + return IRQ_HANDLED; +} + +static irqreturn_t dcmi_irq_callback(int irq, void *arg) +{ + struct stm32_dcmi *dcmi = arg; + + spin_lock(&dcmi->irqlock); + + dcmi->misr = reg_read(dcmi->regs, DCMI_MIS); + + /* Clear interrupt */ + reg_set(dcmi->regs, DCMI_ICR, IT_FRAME | IT_OVR | IT_ERR); + + spin_unlock(&dcmi->irqlock); + + return IRQ_WAKE_THREAD; +} + +static int dcmi_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, + unsigned int *nplanes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); + unsigned int size; + + size = dcmi->fmt.fmt.pix.sizeimage; + + /* Make sure the image size is large enough */ + if (*nplanes) + return sizes[0] < size ? -EINVAL : 0; + + *nplanes = 1; + sizes[0] = size; + + dcmi->active = NULL; + + dev_dbg(dcmi->dev, "Setup queue, count=%d, size=%d\n", + *nbuffers, size); + + return 0; +} + +static int dcmi_buf_init(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct dcmi_buf *buf = container_of(vbuf, struct dcmi_buf, vb); + + INIT_LIST_HEAD(&buf->list); + + return 0; +} + +static int dcmi_buf_prepare(struct vb2_buffer *vb) +{ + struct stm32_dcmi *dcmi = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct dcmi_buf *buf = container_of(vbuf, struct dcmi_buf, vb); + unsigned long size; + + size = dcmi->fmt.fmt.pix.sizeimage; + + if (vb2_plane_size(vb, 0) < size) { + dev_err(dcmi->dev, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, size); + + if (!buf->prepared) { + /* Get memory addresses */ + buf->paddr = + vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); + buf->size = vb2_plane_size(&buf->vb.vb2_buf, 0); + buf->prepared = true; + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, buf->size); + + dev_dbg(dcmi->dev, "buffer[%d] phy=0x%pad size=%zu\n", + vb->index, &buf->paddr, buf->size); + } + + return 0; +} + +static void dcmi_buf_queue(struct vb2_buffer *vb) +{ + struct stm32_dcmi *dcmi = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct dcmi_buf *buf = container_of(vbuf, struct dcmi_buf, vb); + unsigned long flags = 0; + + spin_lock_irqsave(&dcmi->irqlock, flags); + + if ((dcmi->state == RUNNING) && (!dcmi->active)) { + int ret; + + dcmi->active = buf; + + dev_dbg(dcmi->dev, "Starting capture on buffer[%d] queued\n", + buf->vb.vb2_buf.index); + + ret = dcmi_start_capture(dcmi); + if (ret) { + dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n", + __func__); + + spin_unlock_irqrestore(&dcmi->irqlock, flags); + return; + } + } else { + /* Enqueue to video buffers list */ + list_add_tail(&buf->list, &dcmi->buffers); + } + + spin_unlock_irqrestore(&dcmi->irqlock, flags); +} + +static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); + struct dcmi_buf *buf, *node; + u32 val; + int ret; + + /* Enable stream on the sub device */ + ret = v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) { + dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error", + __func__); + goto err_release_buffers; + } + + if (clk_enable(dcmi->mclk)) { + dev_err(dcmi->dev, "%s: Failed to start streaming, cannot enable clock", + __func__); + goto err_subdev_streamoff; + } + + spin_lock_irq(&dcmi->irqlock); + + val = reg_read(dcmi->regs, DCMI_CR); + + val &= ~(CR_PCKPOL | CR_HSPOL | CR_VSPOL | + CR_EDM_0 | CR_EDM_1 | CR_FCRC_0 | + CR_FCRC_1 | CR_JPEG | CR_ESS); + + /* Set bus width */ + switch (dcmi->bus.bus_width) { + case 14: + val &= CR_EDM_0 + CR_EDM_1; + break; + case 12: + val &= CR_EDM_1; + break; + case 10: + val &= CR_EDM_0; + break; + default: + /* Set bus width to 8 bits by default */ + break; + } + + /* Set vertical synchronization polarity */ + if (dcmi->bus.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) + val |= CR_VSPOL; + + /* Set horizontal synchronization polarity */ + if (dcmi->bus.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) + val |= CR_HSPOL; + + /* Set pixel clock polarity */ + if (dcmi->bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING) + val |= CR_PCKPOL; + + reg_write(dcmi->regs, DCMI_CR, val); + + /* Enable dcmi */ + reg_set(dcmi->regs, DCMI_CR, CR_ENABLE); + + dcmi->state = RUNNING; + + dcmi->sequence = 0; + dcmi->errors_count = 0; + dcmi->buffers_count = 0; + dcmi->active = NULL; + + /* + * Start transfer if at least one buffer has been queued, + * otherwise transfer is defered at buffer queueing + */ + if (list_empty(&dcmi->buffers)) { + dev_dbg(dcmi->dev, "Start streaming is defered to next buffer queueing\n"); + spin_unlock_irq(&dcmi->irqlock); + return 0; + } + + dcmi->active = list_entry(dcmi->buffers.next, struct dcmi_buf, list); + list_del_init(&dcmi->active->list); + + dev_dbg(dcmi->dev, "Start streaming, starting capture\n"); + + ret = dcmi_start_capture(dcmi); + if (ret) { + dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture", + __func__); + + spin_unlock_irq(&dcmi->irqlock); + goto err_subdev_streamoff; + } + + /* Enable interruptions */ + reg_set(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR); + + spin_unlock_irq(&dcmi->irqlock); + + return 0; + +err_subdev_streamoff: + v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 0); + +err_release_buffers: + spin_lock_irq(&dcmi->irqlock); + /* + * Return all buffers to vb2 in QUEUED state. + * This will give ownership back to userspace + */ + if (dcmi->active) { + buf = dcmi->active; + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); + dcmi->active = NULL; + } + list_for_each_entry_safe(buf, node, &dcmi->buffers, list) { + list_del_init(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); + } + spin_unlock_irq(&dcmi->irqlock); + + return ret; +} + +static void dcmi_stop_streaming(struct vb2_queue *vq) +{ + struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq); + struct dcmi_buf *buf, *node; + unsigned long time_ms = msecs_to_jiffies(TIMEOUT_MS); + long timeout; + int ret; + + /* Disable stream on the sub device */ + ret = v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 0); + if (ret && ret != -ENOIOCTLCMD) + dev_err(dcmi->dev, "stream off failed in subdev\n"); + + dcmi->state = STOPPING; + + timeout = wait_for_completion_interruptible_timeout(&dcmi->complete, + time_ms); + + spin_lock_irq(&dcmi->irqlock); + + /* Disable interruptions */ + reg_clear(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR); + + /* Disable DCMI */ + reg_clear(dcmi->regs, DCMI_CR, CR_ENABLE); + + if (!timeout) { + dev_err(dcmi->dev, "Timeout during stop streaming\n"); + dcmi->state = STOPPED; + } + + /* Return all queued buffers to vb2 in ERROR state */ + if (dcmi->active) { + buf = dcmi->active; + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + dcmi->active = NULL; + } + list_for_each_entry_safe(buf, node, &dcmi->buffers, list) { + list_del_init(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + } + + spin_unlock_irq(&dcmi->irqlock); + + /* Stop all pending DMA operations */ + dmaengine_terminate_all(dcmi->dma_chan); + + clk_disable(dcmi->mclk); + + dev_dbg(dcmi->dev, "Stop streaming, errors=%d buffers=%d\n", + dcmi->errors_count, dcmi->buffers_count); +} + +static struct vb2_ops dcmi_video_qops = { + .queue_setup = dcmi_queue_setup, + .buf_init = dcmi_buf_init, + .buf_prepare = dcmi_buf_prepare, + .buf_queue = dcmi_buf_queue, + .start_streaming = dcmi_start_streaming, + .stop_streaming = dcmi_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static int dcmi_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + + *fmt = dcmi->fmt; + + return 0; +} + +static const struct dcmi_format *find_format_by_fourcc(struct stm32_dcmi *dcmi, + unsigned int fourcc) +{ + unsigned int num_formats = dcmi->num_user_formats; + const struct dcmi_format *fmt; + unsigned int i; + + for (i = 0; i < num_formats; i++) { + fmt = dcmi->user_formats[i]; + if (fmt->fourcc == fourcc) + return fmt; + } + + return NULL; +} + +static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f, + const struct dcmi_format **current_fmt) +{ + const struct dcmi_format *dcmi_fmt; + struct v4l2_pix_format *pixfmt = &f->fmt.pix; + struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_TRY, + }; + int ret; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + dcmi_fmt = find_format_by_fourcc(dcmi, pixfmt->pixelformat); + if (!dcmi_fmt) { + dcmi_fmt = dcmi->user_formats[dcmi->num_user_formats - 1]; + pixfmt->pixelformat = dcmi_fmt->fourcc; + } + + /* Limit to hardware capabilities */ + if (pixfmt->width > MAX_SUPPORT_WIDTH) + pixfmt->width = MAX_SUPPORT_WIDTH; + if (pixfmt->height > MAX_SUPPORT_HEIGHT) + pixfmt->height = MAX_SUPPORT_HEIGHT; + if (pixfmt->width < MIN_SUPPORT_WIDTH) + pixfmt->width = MIN_SUPPORT_WIDTH; + if (pixfmt->height < MIN_SUPPORT_HEIGHT) + pixfmt->height = MIN_SUPPORT_HEIGHT; + + v4l2_fill_mbus_format(&format.format, pixfmt, dcmi_fmt->mbus_code); + ret = v4l2_subdev_call(dcmi->entity.subdev, pad, set_fmt, + &pad_cfg, &format); + if (ret < 0) + return ret; + + v4l2_fill_pix_format(pixfmt, &format.format); + + pixfmt->field = V4L2_FIELD_NONE; + pixfmt->bytesperline = pixfmt->width * dcmi_fmt->bpp; + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + if (current_fmt) + *current_fmt = dcmi_fmt; + + return 0; +} + +static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f) +{ + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + const struct dcmi_format *current_fmt; + int ret; + + ret = dcmi_try_fmt(dcmi, f, ¤t_fmt); + if (ret) + return ret; + + v4l2_fill_mbus_format(&format.format, &f->fmt.pix, + current_fmt->mbus_code); + ret = v4l2_subdev_call(dcmi->entity.subdev, pad, + set_fmt, NULL, &format); + if (ret < 0) + return ret; + + dcmi->fmt = *f; + dcmi->current_fmt = current_fmt; + + return 0; +} + +static int dcmi_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + + if (vb2_is_streaming(&dcmi->queue)) + return -EBUSY; + + return dcmi_set_fmt(dcmi, f); +} + +static int dcmi_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + + return dcmi_try_fmt(dcmi, f, NULL); +} + +static int dcmi_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + + if (f->index >= dcmi->num_user_formats) + return -EINVAL; + + f->pixelformat = dcmi->user_formats[f->index]->fourcc; + return 0; +} + +static int dcmi_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strlcpy(cap->driver, DRV_NAME, sizeof(cap->driver)); + strlcpy(cap->card, "STM32 Digital Camera Memory Interface", + sizeof(cap->card)); + strlcpy(cap->bus_info, "platform:dcmi", sizeof(cap->bus_info)); + return 0; +} + +static int dcmi_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + + i->type = V4L2_INPUT_TYPE_CAMERA; + strlcpy(i->name, "Camera", sizeof(i->name)); + return 0; +} + +static int dcmi_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int dcmi_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i > 0) + return -EINVAL; + return 0; +} + +static int dcmi_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + const struct dcmi_format *dcmi_fmt; + struct v4l2_subdev_frame_size_enum fse = { + .index = fsize->index, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + dcmi_fmt = find_format_by_fourcc(dcmi, fsize->pixel_format); + if (!dcmi_fmt) + return -EINVAL; + + fse.code = dcmi_fmt->mbus_code; + + ret = v4l2_subdev_call(dcmi->entity.subdev, pad, enum_frame_size, + NULL, &fse); + if (ret) + return ret; + + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = fse.max_width; + fsize->discrete.height = fse.max_height; + + return 0; +} + +static int dcmi_enum_frameintervals(struct file *file, void *fh, + struct v4l2_frmivalenum *fival) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + const struct dcmi_format *dcmi_fmt; + struct v4l2_subdev_frame_interval_enum fie = { + .index = fival->index, + .width = fival->width, + .height = fival->height, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + dcmi_fmt = find_format_by_fourcc(dcmi, fival->pixel_format); + if (!dcmi_fmt) + return -EINVAL; + + fie.code = dcmi_fmt->mbus_code; + + ret = v4l2_subdev_call(dcmi->entity.subdev, pad, + enum_frame_interval, NULL, &fie); + if (ret) + return ret; + + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete = fie.interval; + + return 0; +} + +static const struct of_device_id stm32_dcmi_of_match[] = { + { .compatible = "st,stm32-dcmi"}, + { /* end node */ }, +}; +MODULE_DEVICE_TABLE(of, stm32_dcmi_of_match); + +static int dcmi_open(struct file *file) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + struct v4l2_subdev *sd = dcmi->entity.subdev; + int ret; + + if (mutex_lock_interruptible(&dcmi->lock)) + return -ERESTARTSYS; + + ret = v4l2_fh_open(file); + if (ret < 0) + goto unlock; + + if (!v4l2_fh_is_singular_file(file)) + goto fh_rel; + + ret = v4l2_subdev_call(sd, core, s_power, 1); + if (ret < 0 && ret != -ENOIOCTLCMD) + goto fh_rel; + + ret = dcmi_set_fmt(dcmi, &dcmi->fmt); + if (ret) + v4l2_subdev_call(sd, core, s_power, 0); +fh_rel: + if (ret) + v4l2_fh_release(file); +unlock: + mutex_unlock(&dcmi->lock); + return ret; +} + +static int dcmi_release(struct file *file) +{ + struct stm32_dcmi *dcmi = video_drvdata(file); + struct v4l2_subdev *sd = dcmi->entity.subdev; + bool fh_singular; + int ret; + + mutex_lock(&dcmi->lock); + + fh_singular = v4l2_fh_is_singular_file(file); + + ret = _vb2_fop_release(file, NULL); + + if (fh_singular) + v4l2_subdev_call(sd, core, s_power, 0); + + mutex_unlock(&dcmi->lock); + + return ret; +} + +static const struct v4l2_ioctl_ops dcmi_ioctl_ops = { + .vidioc_querycap = dcmi_querycap, + + .vidioc_try_fmt_vid_cap = dcmi_try_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = dcmi_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = dcmi_s_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = dcmi_enum_fmt_vid_cap, + + .vidioc_enum_input = dcmi_enum_input, + .vidioc_g_input = dcmi_g_input, + .vidioc_s_input = dcmi_s_input, + + .vidioc_enum_framesizes = dcmi_enum_framesizes, + .vidioc_enum_frameintervals = dcmi_enum_frameintervals, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_file_operations dcmi_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = dcmi_open, + .release = dcmi_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +#ifndef CONFIG_MMU + .get_unmapped_area = vb2_fop_get_unmapped_area, +#endif + .read = vb2_fop_read, +}; + +static int dcmi_set_default_fmt(struct stm32_dcmi *dcmi) +{ + struct v4l2_format f = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .fmt.pix = { + .width = CIF_WIDTH, + .height = CIF_HEIGHT, + .field = V4L2_FIELD_NONE, + .pixelformat = dcmi->user_formats[0]->fourcc, + }, + }; + int ret; + + ret = dcmi_try_fmt(dcmi, &f, NULL); + if (ret) + return ret; + dcmi->current_fmt = dcmi->user_formats[0]; + dcmi->fmt = f; + return 0; +} + +static const struct dcmi_format dcmi_formats[] = { + { + .fourcc = V4L2_PIX_FMT_RGB565, + .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE, + .bpp = 2, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, + .bpp = 2, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, + .mbus_code = MEDIA_BUS_FMT_UYVY8_2X8, + .bpp = 2, + }, +}; + +static int dcmi_formats_init(struct stm32_dcmi *dcmi) +{ + const struct dcmi_format *dcmi_fmts[ARRAY_SIZE(dcmi_formats)]; + unsigned int num_fmts = 0, i, j; + struct v4l2_subdev *subdev = dcmi->entity.subdev; + struct v4l2_subdev_mbus_code_enum mbus_code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + while (!v4l2_subdev_call(subdev, pad, enum_mbus_code, + NULL, &mbus_code)) { + for (i = 0; i < ARRAY_SIZE(dcmi_formats); i++) { + if (dcmi_formats[i].mbus_code != mbus_code.code) + continue; + + /* Code supported, have we got this fourcc yet? */ + for (j = 0; j < num_fmts; j++) + if (dcmi_fmts[j]->fourcc == + dcmi_formats[i].fourcc) + /* Already available */ + break; + if (j == num_fmts) + /* New */ + dcmi_fmts[num_fmts++] = dcmi_formats + i; + } + mbus_code.index++; + } + + if (!num_fmts) + return -ENXIO; + + dcmi->num_user_formats = num_fmts; + dcmi->user_formats = devm_kcalloc(dcmi->dev, + num_fmts, sizeof(struct dcmi_format *), + GFP_KERNEL); + if (!dcmi->user_formats) { + dev_err(dcmi->dev, "could not allocate memory\n"); + return -ENOMEM; + } + + memcpy(dcmi->user_formats, dcmi_fmts, + num_fmts * sizeof(struct dcmi_format *)); + dcmi->current_fmt = dcmi->user_formats[0]; + + return 0; +} + +static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier) +{ + struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); + int ret; + + dcmi->vdev->ctrl_handler = dcmi->entity.subdev->ctrl_handler; + ret = dcmi_formats_init(dcmi); + if (ret) { + dev_err(dcmi->dev, "No supported mediabus format found\n"); + return ret; + } + + ret = dcmi_set_default_fmt(dcmi); + if (ret) { + dev_err(dcmi->dev, "Could not set default format\n"); + return ret; + } + + ret = video_register_device(dcmi->vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + dev_err(dcmi->dev, "Failed to register video device\n"); + return ret; + } + + dev_dbg(dcmi->dev, "Device registered as %s\n", + video_device_node_name(dcmi->vdev)); + return 0; +} + +static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_subdev *asd) +{ + struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); + + dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev)); + + /* Checks internaly if vdev has been init or not */ + video_unregister_device(dcmi->vdev); +} + +static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier); + + dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name); + + dcmi->entity.subdev = subdev; + + return 0; +} + +static int dcmi_graph_parse(struct stm32_dcmi *dcmi, struct device_node *node) +{ + struct device_node *ep = NULL; + struct device_node *remote; + + while (1) { + ep = of_graph_get_next_endpoint(node, ep); + if (!ep) + return -EINVAL; + + remote = of_graph_get_remote_port_parent(ep); + if (!remote) { + of_node_put(ep); + return -EINVAL; + } + + /* Remote node to connect */ + dcmi->entity.node = remote; + dcmi->entity.asd.match_type = V4L2_ASYNC_MATCH_OF; + dcmi->entity.asd.match.of.node = remote; + return 0; + } +} + +static int dcmi_graph_init(struct stm32_dcmi *dcmi) +{ + struct v4l2_async_subdev **subdevs = NULL; + int ret; + + /* Parse the graph to extract a list of subdevice DT nodes. */ + ret = dcmi_graph_parse(dcmi, dcmi->dev->of_node); + if (ret < 0) { + dev_err(dcmi->dev, "Graph parsing failed\n"); + return ret; + } + + /* Register the subdevices notifier. */ + subdevs = devm_kzalloc(dcmi->dev, sizeof(*subdevs), GFP_KERNEL); + if (!subdevs) { + of_node_put(dcmi->entity.node); + return -ENOMEM; + } + + subdevs[0] = &dcmi->entity.asd; + + dcmi->notifier.subdevs = subdevs; + dcmi->notifier.num_subdevs = 1; + dcmi->notifier.bound = dcmi_graph_notify_bound; + dcmi->notifier.unbind = dcmi_graph_notify_unbind; + dcmi->notifier.complete = dcmi_graph_notify_complete; + + ret = v4l2_async_notifier_register(&dcmi->v4l2_dev, &dcmi->notifier); + if (ret < 0) { + dev_err(dcmi->dev, "Notifier registration failed\n"); + of_node_put(dcmi->entity.node); + return ret; + } + + return 0; +} + +static int dcmi_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match = NULL; + struct v4l2_of_endpoint ep; + struct stm32_dcmi *dcmi; + struct vb2_queue *q; + struct dma_chan *chan; + struct clk *mclk; + int irq; + int ret = 0; + + match = of_match_device(of_match_ptr(stm32_dcmi_of_match), &pdev->dev); + if (!match) { + dev_err(&pdev->dev, "Could not find a match in devicetree\n"); + return -ENODEV; + } + + dcmi = devm_kzalloc(&pdev->dev, sizeof(struct stm32_dcmi), GFP_KERNEL); + if (!dcmi) + return -ENOMEM; + + dcmi->rstc = of_reset_control_get(np, NULL); + if (IS_ERR(dcmi->rstc)) { + dev_err(&pdev->dev, "Could not get reset control\n"); + return -ENODEV; + } + + /* Get bus characteristics from devicetree */ + np = of_graph_get_next_endpoint(np, NULL); + if (!np) { + dev_err(&pdev->dev, "Could not find the endpoint\n"); + of_node_put(np); + goto err_reset_control_put; + } + + ret = v4l2_of_parse_endpoint(np, &ep); + if (ret) { + dev_err(&pdev->dev, "Could not parse the endpoint\n"); + of_node_put(np); + goto err_reset_control_put; + } + + if (ep.bus_type == V4L2_MBUS_CSI2) { + dev_err(&pdev->dev, "CSI bus not supported\n"); + of_node_put(np); + goto err_reset_control_put; + } + dcmi->bus.flags = ep.bus.parallel.flags; + dcmi->bus.bus_width = ep.bus.parallel.bus_width; + dcmi->bus.data_shift = ep.bus.parallel.data_shift; + + of_node_put(np); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "Could not get irq\n"); + return -ENODEV; + } + + dcmi->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!dcmi->res) { + dev_err(&pdev->dev, "Could not get resource\n"); + return -ENODEV; + } + + dcmi->regs = devm_ioremap_resource(&pdev->dev, dcmi->res); + if (IS_ERR(dcmi->regs)) { + dev_err(&pdev->dev, "Could not map registers\n"); + return PTR_ERR(dcmi->regs); + } + + ret = devm_request_threaded_irq(&pdev->dev, irq, dcmi_irq_callback, + dcmi_irq_thread, IRQF_ONESHOT, + dev_name(&pdev->dev), dcmi); + if (ret) { + dev_err(&pdev->dev, "Unable to request irq %d\n", irq); + return -ENODEV; + } + + mclk = devm_clk_get(&pdev->dev, "mclk"); + if (IS_ERR(mclk)) { + dev_err(&pdev->dev, "Unable to get mclk\n"); + return PTR_ERR(mclk); + } + + chan = dma_request_slave_channel(&pdev->dev, "tx"); + if (!chan) { + dev_info(&pdev->dev, "Unable to request DMA channel, defer probing\n"); + return -EPROBE_DEFER; + } + + ret = clk_prepare(mclk); + if (ret) { + dev_err(&pdev->dev, "Unable to prepare mclk %p\n", mclk); + goto err_dma_release; + } + + spin_lock_init(&dcmi->irqlock); + mutex_init(&dcmi->lock); + init_completion(&dcmi->complete); + INIT_LIST_HEAD(&dcmi->buffers); + + dcmi->dev = &pdev->dev; + dcmi->mclk = mclk; + dcmi->state = STOPPED; + dcmi->dma_chan = chan; + + q = &dcmi->queue; + + /* Initialize the top-level structure */ + ret = v4l2_device_register(&pdev->dev, &dcmi->v4l2_dev); + if (ret) + goto err_clk_unprepare; + + dcmi->vdev = video_device_alloc(); + if (!dcmi->vdev) { + ret = -ENOMEM; + goto err_device_unregister; + } + + /* Video node */ + dcmi->vdev->fops = &dcmi_fops; + dcmi->vdev->v4l2_dev = &dcmi->v4l2_dev; + dcmi->vdev->queue = &dcmi->queue; + strlcpy(dcmi->vdev->name, KBUILD_MODNAME, sizeof(dcmi->vdev->name)); + dcmi->vdev->release = video_device_release; + dcmi->vdev->ioctl_ops = &dcmi_ioctl_ops; + dcmi->vdev->lock = &dcmi->lock; + dcmi->vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + video_set_drvdata(dcmi->vdev, dcmi); + + /* Buffer queue */ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF; + q->lock = &dcmi->lock; + q->drv_priv = dcmi; + q->buf_struct_size = sizeof(struct dcmi_buf); + q->ops = &dcmi_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->min_buffers_needed = 2; + q->dev = &pdev->dev; + + ret = vb2_queue_init(q); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to initialize vb2 queue\n"); + goto err_device_release; + } + + ret = dcmi_graph_init(dcmi); + if (ret < 0) + goto err_device_release; + + /* Reset device */ + ret = reset_control_assert(dcmi->rstc); + if (ret) { + dev_err(&pdev->dev, "Failed to assert the reset line\n"); + goto err_device_release; + } + + usleep_range(3000, 5000); + + ret = reset_control_deassert(dcmi->rstc); + if (ret) { + dev_err(&pdev->dev, "Failed to deassert the reset line\n"); + goto err_device_release; + } + + dev_info(&pdev->dev, "Probe done\n"); + + platform_set_drvdata(pdev, dcmi); + return 0; + +err_reset_control_put: + reset_control_put(dcmi->rstc); +err_device_release: + video_device_release(dcmi->vdev); +err_device_unregister: + v4l2_device_unregister(&dcmi->v4l2_dev); +err_clk_unprepare: + clk_unprepare(dcmi->mclk); +err_dma_release: + dma_release_channel(dcmi->dma_chan); + + return ret; +} + +static int dcmi_remove(struct platform_device *pdev) +{ + struct stm32_dcmi *dcmi = platform_get_drvdata(pdev); + + v4l2_async_notifier_unregister(&dcmi->notifier); + v4l2_device_unregister(&dcmi->v4l2_dev); + clk_unprepare(dcmi->mclk); + dma_release_channel(dcmi->dma_chan); + reset_control_put(dcmi->rstc); + + return 0; +} + +static struct platform_driver stm32_dcmi_driver = { + .probe = dcmi_probe, + .remove = dcmi_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(stm32_dcmi_of_match), + }, +}; + +module_platform_driver(stm32_dcmi_driver); + +MODULE_AUTHOR("Yannick Fertre "); +MODULE_AUTHOR("Hugues Fruchet "); +MODULE_DESCRIPTION("STMicroelectronics STM32 Digital Camera Memory Interface driver"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("video"); -- 1.9.1