Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262874AbTFDFaP (ORCPT ); Wed, 4 Jun 2003 01:30:15 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262878AbTFDFaP (ORCPT ); Wed, 4 Jun 2003 01:30:15 -0400 Received: from [217.7.64.198] ([217.7.64.198]:37354 "EHLO mx1.net4u.de") by vger.kernel.org with ESMTP id S262874AbTFDF3t (ORCPT ); Wed, 4 Jun 2003 01:29:49 -0400 From: Ernst Herzberg Reply-To: earny@net4u.de To: linux-kernel@vger.kernel.org Subject: 2.4.21-rc7 failed boot without Local APIC support Date: Wed, 4 Jun 2003 07:43:14 +0200 User-Agent: KMail/1.5.2 MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_ybY3+LN8iKqsFbd" Message-Id: <200306040743.14456.earny@net4u.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 37586 Lines: 1265 --Boundary-00=_ybY3+LN8iKqsFbd Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Moin. The only patch applied is acpi-20030512. 2.4.21-rc2 works without problems. Booting _with_ local APIC enabled works fine, but alsa on VT8233 AC97 does = not work. Booting _without_ local APIC: Linux version 2.4.21-rc7 (root@dev.net4u.de) (gcc version 3.2.2) #6 Wed Jun= 4 06:51:53 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: RSDP (v000 KM266 ) @ 0x000f8090 ACPI: RSDT (v001 KM266 AWRDACPI 16944.11825) @ 0x1fff3000 ACPI: FADT (v001 KM266 AWRDACPI 16944.11825) @ 0x1fff3040 ACPI: MADT (v001 KM266 AWRDACPI 16944.11825) @ 0x1fff6dc0 ACPI: DSDT (v001 KM266 AWRDACPI 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist Kernel command line: root=3D/dev/hda3 video=3Daty128fb:1280x1024-16 console= =3DttyS0,38400n8 Initializing CPU#0 Detected 1539.876 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3073.63 BogoMIPS Memory: 515260k/524224k available (1933k kernel code, 8576k reserved, 628k = data, 104k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1800+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030509 PCI: PCI BIOS revision 2.10 entry at 0xfb6e0, last bus=3D1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23, disabled) ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23, disabled) ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled) ACPI: PCI Interrupt Link [ALKD] (IRQs 21, disabled) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 0 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 0 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 0 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 0 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=3Dnoacpi' or even 'a= cpi=3Doff' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). EFS: 1.0a - http://aeschi.ch.eu.org/efs/ ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) ACPI: Thermal Zone [THRM] (57 C) aty128fb: Rage128 BIOS located at segment C00C0000 aty128fb: Rage128 Pro PF (AGP) [chip rev 0x1] 32M 128-bit SDR SGRAM (1:1) Console: switching to colour frame buffer device 160x64 fb0: ATY Rage128 frame buffer device on PCI aty128fb: Rage128 MTRR set to ON pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_P= CI enabled ttyS00 at 0x03f8 (irq =3D 4) is a 16550A ttyS01 at 0x02f8 (irq =3D 3) is a 16550A Real Time Clock Driver v1.10e Non-volatile memory driver v1.2 loop: loaded (max 8 devices) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 00:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xd000. Vers LK1.1.16 00:60:97:b8:2e:56, IRQ 5 product code 4848 rev 00.0 date 03-23-97 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. MII transceiver found at address 24, status 786f. Enabling bus-master transmits and whole-frame receives. 00:08.0: scatter/gather enabled. h/w checksums disabled eth0: Dropping NETIF_F_SG since no checksum feature. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Unsupported Via chipset (device id: 3116), you might want to try a= gp_try_unsupported=3D1. [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] Initialized r128 2.2.0 20010917 on minor 1 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx VP_IDE: IDE controller at PCI slot 00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio hda: ST320423A, ATA DISK drive blk: queue c03c5ea0, I/O limit 4095Mb (mask 0xffffffff) hdc: LTN483L, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area =3D> 1 hda: 40011300 sectors (20486 MB) w/512KiB Cache, CHS=3D2490/255/63, UDMA(66) hdc: attached ide-cdrom driver. hdc: ATAPI 48X CD-ROM drive, 120kB Cache Uniform CD-ROM driver Revision: 3.12 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs scsi0:0:0:0: Attempting to queue an ABORT message scsi0: Dumping Card State while idle, at SEQADDR 0x9 ACCUM =3D 0x0, SINDEX =3D 0x3, DINDEX =3D 0xe4, ARG_2 =3D 0x0 HCNT =3D 0x0 SCBPTR =3D 0x0 SCSISEQ =3D 0x12, SBLKCTL =3D 0x6 DFCNTRL =3D 0x0, DFSTATUS =3D 0x89 LASTPHASE =3D 0x1, SCSISIGI =3D 0x0, SXFRCTL0 =3D 0x80 SSTAT0 =3D 0x0, SSTAT1 =3D 0x8 SCSIPHASE =3D 0x0 STACK =3D=3D 0x3, 0x108, 0x160, 0x0 SCB count =3D 4 Kernel NEXTQSCB =3D 2 Card NEXTQSCB =3D 2 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 = 20 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c 0x0, s 0xff, l 255, t= 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c = 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff= , l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t = 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c= 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0= xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 25= 5, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff= ) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x= 0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff= , l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, = t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 2= 7(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, = s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l= 255, t 0xff) Pending list:=20 Kernel Free SCB list: 3 1 0=20 DevQ(0:0:0): 0 waiting scsi0:0:0:0: Command already completed aic7xxx_abort returns 0x2002 scsi0:0:0:0: Attempting to queue an ABORT message scsi0: Dumping Card State in Message-out phase, at SEQADDR 0x168 ACCUM =3D 0xa0, SINDEX =3D 0x61, DINDEX =3D 0xe4, ARG_2 =3D 0x0 HCNT =3D 0x0 SCBPTR =3D 0x0 SCSISEQ =3D 0x12, SBLKCTL =3D 0x6 DFCNTRL =3D 0x0, DFSTATUS =3D 0x89 LASTPHASE =3D 0xa0, SCSISIGI =3D 0xb6, SXFRCTL0 =3D 0x88 SSTAT0 =3D 0x2, SSTAT1 =3D 0x1 SCSIPHASE =3D 0x4 STACK =3D=3D 0x175, 0x160, 0x0, 0xe7 SCB count =3D 4 Kernel NEXTQSCB =3D 3 Card NEXTQSCB =3D 3 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20= 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0x2) 1(c 0x0, s 0xff, l 255, t = 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c 0= x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff,= l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t 0= xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c = 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0x= ff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255= , t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff)= 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x0= , s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff,= l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, t= 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 27= (c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, s= 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l = 255, t 0xff) Pending list: 2(c 0x40, s 0x7, l 0) Kernel Free SCB list: 1 0 Untagged Q(0): 2 DevQ(0:0:0): 0 waiting scsi0:0:0:0: Device is active, asserting ATN Recovery code sleeping Recovery code awake Timer Expired aic7xxx_abort returns 0x2003 scsi0:0:0:0: Attempting to queue a TARGET RESET message aic7xxx_dev_reset returns 0x2003 Recovery SCB completes scsi0:0:0:0: Attempting to queue an ABORT message ahc_intr: HOST_MSG_LOOP bad phase 0x0 scsi0: Dumping Card State while idle, at SEQADDR 0x19d ACCUM =3D 0xa0, SINDEX =3D 0x0, DINDEX =3D 0xe4, ARG_2 =3D 0x0 HCNT =3D 0x0 SCBPTR =3D 0x0 SCSISEQ =3D 0x12, SBLKCTL =3D 0x6 DFCNTRL =3D 0x0, DFSTATUS =3D 0x89 LASTPHASE =3D 0x1, SCSISIGI =3D 0x0, SXFRCTL0 =3D 0x80 SSTAT0 =3D 0x0, SSTAT1 =3D 0x0 SCSIPHASE =3D 0x0 STACK =3D=3D 0x160, 0x0, 0xe6, 0xb SCB count =3D 4 Kernel NEXTQSCB =3D 2 Card NEXTQSCB =3D 3 QINFIFO entries: 3 Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 = 20 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c 0x0, s 0xff, l 255, t= 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c = 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff= , l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t = 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c= 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0= xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 25= 5, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff= ) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x= 0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff= , l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, = t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 2= 7(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, = s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l= 255, t 0xff) Pending list: 3(c 0x50, s 0x7, l 0) Kernel Free SCB list: 1 0 Untagged Q(0): 3 DevQ(0:0:0): 0 waiting scsi0:0:0:0: Cmd aborted from QINFIFO aic7xxx_abort returns 0x2002 scsi: device set offline - not ready or command retry failed after bus rese= t: host 0 channel 0 id 0 lun 0 scsi0:0:1:0: Attempting to queue an ABORT message scsi0: Dumping Card State while idle, at SEQADDR 0x8 ACCUM =3D 0x0, SINDEX =3D 0x2, DINDEX =3D 0xe4, ARG_2 =3D 0x0 HCNT =3D 0x0 SCBPTR =3D 0x0 SCSISEQ =3D 0x12, SBLKCTL =3D 0x6 DFCNTRL =3D 0x0, DFSTATUS =3D 0x89 LASTPHASE =3D 0x1, SCSISIGI =3D 0x0, SXFRCTL0 =3D 0x80 SSTAT0 =3D 0x0, SSTAT1 =3D 0x8 SCSIPHASE =3D 0x0 STACK =3D=3D 0x3, 0x108, 0x160, 0xe6 SCB count =3D 4 Kernel NEXTQSCB =3D 3 Card NEXTQSCB =3D 3 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 = 20 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0(c 0x40, s 0x17, l 0, t 0xff) 1(c 0x0, s 0xff, l 255, = t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c= 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xf= f, l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t= 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(= c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s = 0xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 2= 55, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xf= f) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0= x0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xf= f, l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255,= t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) = 27(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0,= s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, = l 255, t 0xff) Pending list: Kernel Free SCB list: 2 1 0 DevQ(0:0:0): 0 waiting DevQ(0:1:0): 0 waiting scsi0:0:1:0: Command already completed aic7xxx_abort returns 0x2002 scsi0:0:1:0: Attempting to queue an ABORT message scsi0: Dumping Card State in Message-out phase, at SEQADDR 0x168 ACCUM =3D 0xa0, SINDEX =3D 0x61, DINDEX =3D 0xe4, ARG_2 =3D 0x0 HCNT =3D 0x0 SCBPTR =3D 0x0 SCSISEQ =3D 0x12, SBLKCTL =3D 0x6 DFCNTRL =3D 0x0, DFSTATUS =3D 0x89 LASTPHASE =3D 0xa0, SCSISIGI =3D 0xb6, SXFRCTL0 =3D 0x88 SSTAT0 =3D 0x2, SSTAT1 =3D 0x1 SCSIPHASE =3D 0x4 STACK =3D=3D 0x175, 0x160, 0xe6, 0xe7 SCB count =3D 4 Kernel NEXTQSCB =3D 2 Card NEXTQSCB =3D 2 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20= 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0(c 0x40, s 0x17, l 0, t 0x3) 1(c 0x0, s 0xff, l 255, t= 0xff) 2(c 0x0, s 0xff, l 255, t 0xff) 3(c 0x0, s 0xff, l 255, t 0xff) 4(c = 0x0, s 0xff, l 255, t 0xff) 5(c 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff= , l 255, t 0xff) 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255, t = 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff, l 255, t 0xff) 11(c= 0x0, s 0xff, l 255, t 0xff) 12(c 0x0, s 0xff, l 255, t 0xff) 13(c 0x0, s 0= xff, l 255, t 0xff) 14(c 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 25= 5, t 0xff) 16(c 0x0, s 0xff, l 255, t 0xff) 17(c 0x0, s 0xff, l 255, t 0xff= ) 18(c 0x0, s 0xff, l 255, t 0xff) 19(c 0x0, s 0xff, l 255, t 0xff) 20(c 0x= 0, s 0xff, l 255, t 0xff) 21(c 0x0, s 0xff, l 255, t 0xff) 22(c 0x0, s 0xff= , l 255, t 0xff) 23(c 0x0, s 0xff, l 255, t 0xff) 24(c 0x0, s 0xff, l 255, = t 0xff) 25(c 0x0, s 0xff, l 255, t 0xff) 26(c 0x0, s 0xff, l 255, t 0xff) 2= 7(c 0x0, s 0xff, l 255, t 0xff) 28(c 0x0, s 0xff, l 255, t 0xff) 29(c 0x0, = s 0xff, l 255, t 0xff) 30(c 0x0, s 0xff, l 255, t 0xff) 31(c 0x0, s 0xff, l= 255, t 0xff) Pending list: 3(c 0x40, s 0x17, l 0) Kernel Free SCB list: 1 0 Untagged Q(1): 3 DevQ(0:0:0): 0 waiting DevQ(0:1:0): 0 waiting scsi0:0:1:0: Device is active, asserting ATN Recovery code sleeping Recovery code awake aic7xxx_abort returns 0x2002 scsi0:0:1:0: Attempting to queue a TARGET RESET message aic7xxx_dev_reset returns 0x2003 Recovery SCB completes [...........] dev:~ # lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266] Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:08.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] 00:0a.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Ma= ster IDE (rev 06) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Aud= io Controller (rev 40) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP= 4x TMDS =46ailed config attached. --Boundary-00=_ybY3+LN8iKqsFbd Content-Type: text/plain; charset="us-ascii"; name=".config" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=".config" # # Automatically generated by make menuconfig: don't edit # CONFIG_X86=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_HAS_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_F00F_WORKS_OK=y CONFIG_X86_MCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_HIGHMEM is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_X86_UP_APIC is not set # CONFIG_X86_UP_IOAPIC is not set # CONFIG_X86_TSC_DISABLE is not set CONFIG_X86_TSC=y # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set # CONFIG_HOTPLUG_PCI_IBM is not set # CONFIG_HOTPLUG_PCI_ACPI is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_PM is not set # CONFIG_APM is not set # # ACPI Support # CONFIG_ACPI=y # CONFIG_ACPI_HT_ONLY is not set CONFIG_ACPI_BOOT=y CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y # CONFIG_ACPI_FAN is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_STATS is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=y # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # CONFIG_PHONE_IXJ_PCMCIA is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_IDEDISK_STROKE=y # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_OFFBOARD=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_IDEDMA_ONLYDISK=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_BLK_DEV_ADMA100 is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_AMD74XX_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # CONFIG_BLK_DEV_ATARAID is not set # CONFIG_BLK_DEV_ATARAID_PDC is not set # CONFIG_BLK_DEV_ATARAID_HPT is not set # CONFIG_BLK_DEV_ATARAID_SII is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 # CONFIG_AIC7XXX_PROBE_EISA_VL is not set # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_BOOT is not set # CONFIG_FUSION_ISENSE is not set # CONFIG_FUSION_CTL is not set # CONFIG_FUSION_LAN is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=y # CONFIG_TYPHOON is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set # CONFIG_EEPRO100 is not set # CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set CONFIG_8139CP=y CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE_MMIO is not set # CONFIG_TLAN is not set # CONFIG_TC35815 is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # CONFIG_INPUT_KEYBDEV is not set # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=m CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_MK712_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_QIC02_TAPE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_IPMI_PANIC_EVENT is not set # CONFIG_IPMI_DEVICE_INTERFACE is not set # CONFIG_IPMI_KCS is not set # CONFIG_IPMI_WATCHDOG is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_SCx200_GPIO is not set # CONFIG_AMD_RNG is not set # CONFIG_INTEL_RNG is not set # CONFIG_AMD_PM768 is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_INTEL is not set # CONFIG_AGP_I810 is not set CONFIG_AGP_VIA=y # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD_8151 is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set # CONFIG_AGP_SWORKS is not set CONFIG_DRM=y # CONFIG_DRM_OLD is not set CONFIG_DRM_NEW=y CONFIG_DRM_TDFX=y CONFIG_DRM_R128=y # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I810_XFREE_41 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_MWAVE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # CONFIG_QUOTA=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BEFS_DEBUG is not set # CONFIG_BFS_FS is not set CONFIG_EXT3_FS=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set CONFIG_EFS_FS=y # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y # CONFIG_JFS_FS is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_NFSD_TCP=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set CONFIG_ZISOFS_FS=y # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_RIVA is not set # CONFIG_FB_CLGEN is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_HGA is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set CONFIG_FB_ATY128=y # CONFIG_FB_INTEL is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FBCON_ADVANCED is not set CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB24=y CONFIG_FBCON_CFB32=y # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Sound # CONFIG_SOUND=m # CONFIG_SOUND_ALI5455 is not set # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_MIDI_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_FORTE is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_MIDI_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set # # USB support # # CONFIG_USB is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set # # Library routines # CONFIG_ZLIB_INFLATE=y # CONFIG_ZLIB_DEFLATE is not set --Boundary-00=_ybY3+LN8iKqsFbd-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/