Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754469AbdDYHl0 (ORCPT ); Tue, 25 Apr 2017 03:41:26 -0400 Received: from mail-wm0-f48.google.com ([74.125.82.48]:34897 "EHLO mail-wm0-f48.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1176040AbdDYHlP (ORCPT ); Tue, 25 Apr 2017 03:41:15 -0400 From: Neil Armstrong To: khilman@baylibre.com, carlo@caione.org, mchehab@kernel.org Cc: Alex Deryskyba , linux-amlogic@lists.infradead.org, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong Subject: [PATCH] media: rc: meson-ir: switch config to NEC decoding on shutdown Date: Tue, 25 Apr 2017 09:41:09 +0200 Message-Id: <1493106069-19922-1-git-send-email-narmstrong@baylibre.com> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2245 Lines: 68 From: Alex Deryskyba On the Amlogic SoCs, the bootloader firmware can handle the IR hardware in order to Wake up or Power back the system when in suspend on shutdown mode. This patch switches the hardware configuration in a state usable by the firmware to permit powering the system back. Some vendor bootloader firmware were modified to switch to this configuration but it may not be the case for all available products. This patch was originally posted at [1]. [1] https://github.com/LibreELEC/linux-amlogic/pull/27 Signed-off-by: Alex Deryskyba Signed-off-by: Neil Armstrong --- drivers/media/rc/meson-ir.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c index 42ae2ec..0632f6a 100644 --- a/drivers/media/rc/meson-ir.c +++ b/drivers/media/rc/meson-ir.c @@ -211,6 +211,32 @@ static int meson_ir_remove(struct platform_device *pdev) return 0; } +static void meson_ir_shutdown(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct meson_ir *ir = platform_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&ir->lock, flags); + + /* + * Set operation mode to NEC/hardware decoding to give + * bootloader a chance to power the system back on + */ + if (of_device_is_compatible(node, "amlogic,meson6-ir")) + meson_ir_set_mask(ir, IR_DEC_REG1, REG1_MODE_MASK, + DECODE_MODE_NEC << REG1_MODE_SHIFT); + else + meson_ir_set_mask(ir, IR_DEC_REG2, REG2_MODE_MASK, + DECODE_MODE_NEC << REG2_MODE_SHIFT); + + /* Set rate to default value */ + meson_ir_set_mask(ir, IR_DEC_REG0, REG0_RATE_MASK, 0x13); + + spin_unlock_irqrestore(&ir->lock, flags); +} + static const struct of_device_id meson_ir_match[] = { { .compatible = "amlogic,meson6-ir" }, { .compatible = "amlogic,meson8b-ir" }, @@ -222,6 +248,7 @@ static int meson_ir_remove(struct platform_device *pdev) static struct platform_driver meson_ir_driver = { .probe = meson_ir_probe, .remove = meson_ir_remove, + .shutdown = meson_ir_shutdown, .driver = { .name = DRIVER_NAME, .of_match_table = meson_ir_match, -- 1.9.1