Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1953382AbdDYSdx (ORCPT ); Tue, 25 Apr 2017 14:33:53 -0400 Received: from mail-oi0-f65.google.com ([209.85.218.65]:34695 "EHLO mail-oi0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1950489AbdDYSdH (ORCPT ); Tue, 25 Apr 2017 14:33:07 -0400 From: Marek Vasut X-Google-Original-From: Marek Vasut To: linux-renesas-soc@vger.kernel.org Cc: lee.jones@linaro.org, Marek Vasut , linux-kernel@vger.kernel.org, Geert Uytterhoeven Subject: [RESEND][PATCH V2 2/4] mfd: Add ROHM BD9571MWV-M MFD PMIC driver Date: Tue, 25 Apr 2017 20:32:08 +0200 Message-Id: <20170425183210.30594-2-marek.vasut+renesas@gmail.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170425183210.30594-1-marek.vasut+renesas@gmail.com> References: <20170425183210.30594-1-marek.vasut+renesas@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14006 Lines: 442 Add the MFD part of the ROHM BD9571MWV-M PMIC driver and MAINTAINERS entry. The MFD part only specifies the regmap bits for the PMIC and binds the subdevs together. Signed-off-by: Marek Vasut Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven Cc: Lee Jones --- V2: - Change BD9571MWV_AVS_VD09_VID0,1,2,3 to BD9571MWV_AVS_VD09_VID(n) - Change BD9571MWV_AVS_DVFS_VID0,1,2,3 to BD9571MWV_AVS_DVFS_VID(n) - Make the AVS_VD09 range RW, so it can be used by the regulator driver for the VD09 regulator - Report the regmap read return values when attempting to read ID registers fails --- MAINTAINERS | 11 ++ drivers/mfd/Kconfig | 13 +++ drivers/mfd/Makefile | 1 + drivers/mfd/bd9571mwv.c | 230 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/bd9571mwv.h | 115 +++++++++++++++++++++ 5 files changed, 370 insertions(+) create mode 100644 drivers/mfd/bd9571mwv.c create mode 100644 include/linux/mfd/bd9571mwv.h diff --git a/MAINTAINERS b/MAINTAINERS index 67280051e30a..6f19aa08375d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10917,6 +10917,17 @@ L: linux-serial@vger.kernel.org S: Odd Fixes F: drivers/tty/serial/rp2.* +ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS +M: Marek Vasut +L: linux-kernel@vger.kernel.org +L: linux-renesas-soc@vger.kernel.org +S: Supported +F: drivers/mfd/bd9571mwv.c +F: drivers/regulator/bd9571mwv-regulator.c +F: drivers/gpio/gpio-bd9571mwv.c +F: include/linux/mfd/bd9571mwv.h +F: Documentation/devicetree/bindings/mfd/bd9571mwv.txt + ROSE NETWORK LAYER M: Ralf Baechle L: linux-hams@vger.kernel.org diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index de68b5ba8741..fa1f41ef5332 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -133,6 +133,19 @@ config MFD_BCM590XX help Support for the BCM590xx PMUs from Broadcom +config MFD_BD9571MWV + tristate "ROHM BD9571MWV PMIC" + select MFD_CORE + select REGMAP_I2C + depends on I2C + help + Support for the ROHM BD9571MWV PMIC, which contains single + voltage regulator, voltage sampling units, GPIO block and + watchdog block. + + This driver can also be built as a module. If so, the module + will be called bd9571mwv. + config MFD_AC100 tristate "X-Powers AC100" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index fa86dbe65e52..e2c82d2b108d 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_ACT8945A) += act8945a.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o +obj-$(CONFIG_MFD_BD9571MWV) += bd9571mwv.o cros_ec_core-objs := cros_ec.o cros_ec_core-$(CONFIG_ACPI) += cros_ec_acpi_gpe.o obj-$(CONFIG_MFD_CROS_EC) += cros_ec_core.o diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c new file mode 100644 index 000000000000..64e088dfe7b0 --- /dev/null +++ b/drivers/mfd/bd9571mwv.c @@ -0,0 +1,230 @@ +/* + * ROHM BD9571MWV-M MFD driver + * + * Copyright (C) 2017 Marek Vasut + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the TPS65086 driver + */ + +#include +#include +#include +#include + +#include + +static const struct mfd_cell bd9571mwv_cells[] = { + { .name = "bd9571mwv-regulator", }, + { .name = "bd9571mwv-gpio", }, +}; + +static const struct regmap_range bd9571mwv_readable_yes_ranges[] = { + regmap_reg_range(BD9571MWV_VENDOR_CODE, BD9571MWV_PRODUCT_REVISION), + regmap_reg_range(BD9571MWV_AVS_SET_MONI, BD9571MWV_AVS_DVFS_VID(3)), + regmap_reg_range(BD9571MWV_VD18_VID, BD9571MWV_VD33_VID), + regmap_reg_range(BD9571MWV_DVFS_VINIT, BD9571MWV_DVFS_VINIT), + regmap_reg_range(BD9571MWV_DVFS_SETVMAX, BD9571MWV_DVFS_MONIVDAC), + regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN), + regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INTMASK), + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK), +}; + +static const struct regmap_access_table bd9571mwv_readable_table = { + .yes_ranges = bd9571mwv_readable_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(bd9571mwv_readable_yes_ranges), +}; + +static const struct regmap_range bd9571mwv_writable_yes_ranges[] = { + regmap_reg_range(BD9571MWV_AVS_VD09_VID(0), BD9571MWV_AVS_VD09_VID(3)), + regmap_reg_range(BD9571MWV_DVFS_SETVID, BD9571MWV_DVFS_SETVID), + regmap_reg_range(BD9571MWV_GPIO_DIR, BD9571MWV_GPIO_OUT), + regmap_reg_range(BD9571MWV_GPIO_INT_SET, BD9571MWV_GPIO_INTMASK), + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTMASK), +}; + +static const struct regmap_access_table bd9571mwv_writable_table = { + .yes_ranges = bd9571mwv_writable_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(bd9571mwv_writable_yes_ranges), +}; + +static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = { + regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN), + regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT), + regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ), +}; + +static const struct regmap_access_table bd9571mwv_volatile_table = { + .yes_ranges = bd9571mwv_volatile_yes_ranges, + .n_yes_ranges = ARRAY_SIZE(bd9571mwv_volatile_yes_ranges), +}; + +static const struct regmap_config bd9571mwv_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .rd_table = &bd9571mwv_readable_table, + .wr_table = &bd9571mwv_writable_table, + .volatile_table = &bd9571mwv_volatile_table, + .max_register = 0xff, +}; + +static const struct regmap_irq bd9571mwv_irqs[] = { + REGMAP_IRQ_REG(BD9571MWV_IRQ_MD1, 0, + BD9571MWV_INT_INTREQ_MD1_INT), + REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E1, 0, + BD9571MWV_INT_INTREQ_MD2_E1_INT), + REGMAP_IRQ_REG(BD9571MWV_IRQ_MD2_E2, 0, + BD9571MWV_INT_INTREQ_MD2_E2_INT), + REGMAP_IRQ_REG(BD9571MWV_IRQ_PROT_ERR, 0, + BD9571MWV_INT_INTREQ_PROT_ERR_INT), + REGMAP_IRQ_REG(BD9571MWV_IRQ_GP, 0, + BD9571MWV_INT_INTREQ_GP_INT), + REGMAP_IRQ_REG(BD9571MWV_IRQ_128H_OF, 0, + BD9571MWV_INT_INTREQ_128H_OF_INT), + REGMAP_IRQ_REG(BD9571MWV_IRQ_WDT_OF, 0, + BD9571MWV_INT_INTREQ_WDT_OF_INT), + REGMAP_IRQ_REG(BD9571MWV_IRQ_BKUP_TRG, 0, + BD9571MWV_INT_INTREQ_BKUP_TRG_INT), +}; + +static struct regmap_irq_chip bd9571mwv_irq_chip = { + .name = "bd9571mwv", + .status_base = BD9571MWV_INT_INTREQ, + .mask_base = BD9571MWV_INT_INTMASK, + .ack_base = BD9571MWV_INT_INTREQ, + .init_ack_masked = true, + .num_regs = 1, + .irqs = bd9571mwv_irqs, + .num_irqs = ARRAY_SIZE(bd9571mwv_irqs), +}; + +static int bd9571mwv_identify(struct bd9571mwv *bd) +{ + struct device *dev = bd->dev; + unsigned int value; + int ret; + + ret = regmap_read(bd->regmap, BD9571MWV_VENDOR_CODE, &value); + if (ret) { + dev_err(dev, "Failed to read vendor code register (ret=%i)\n", + ret); + return ret; + } + + if (value != BD9571MWV_VENDOR_CODE_VAL) { + dev_err(dev, "Invalid vendor code ID %02x (expected %02x)\n", + value, BD9571MWV_VENDOR_CODE_VAL); + return -EINVAL; + } + + ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_CODE, &value); + if (ret) { + dev_err(dev, "Failed to read product code register (ret=%i)\n", + ret); + return ret; + } + + if (value != BD9571MWV_PRODUCT_CODE_VAL) { + dev_err(dev, "Invalid product code ID %02x (expected %02x)\n", + value, BD9571MWV_PRODUCT_CODE_VAL); + return -EINVAL; + } + + ret = regmap_read(bd->regmap, BD9571MWV_PRODUCT_REVISION, &value); + if (ret) { + dev_err(dev, "Failed to read revision register (ret=%i)\n", + ret); + return ret; + } + + dev_info(dev, "Device: BD9571MWV rev. %d\n", value & 0xff); + + return 0; +} + +static int bd9571mwv_probe(struct i2c_client *client, + const struct i2c_device_id *ids) +{ + struct bd9571mwv *bd; + int ret; + + bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL); + if (!bd) + return -ENOMEM; + + i2c_set_clientdata(client, bd); + bd->dev = &client->dev; + bd->irq = client->irq; + + bd->regmap = devm_regmap_init_i2c(client, &bd9571mwv_regmap_config); + if (IS_ERR(bd->regmap)) { + dev_err(bd->dev, "Failed to initialize register map\n"); + return PTR_ERR(bd->regmap); + } + + ret = bd9571mwv_identify(bd); + if (ret) + return ret; + + ret = regmap_add_irq_chip(bd->regmap, bd->irq, IRQF_ONESHOT, 0, + &bd9571mwv_irq_chip, &bd->irq_data); + if (ret) { + dev_err(bd->dev, "Failed to register IRQ chip\n"); + return ret; + } + + ret = mfd_add_devices(bd->dev, PLATFORM_DEVID_AUTO, bd9571mwv_cells, + ARRAY_SIZE(bd9571mwv_cells), NULL, 0, + regmap_irq_get_domain(bd->irq_data)); + if (ret) { + regmap_del_irq_chip(bd->irq, bd->irq_data); + return ret; + } + + return 0; +} + +static int bd9571mwv_remove(struct i2c_client *client) +{ + struct bd9571mwv *bd = i2c_get_clientdata(client); + + regmap_del_irq_chip(bd->irq, bd->irq_data); + + return 0; +} + +static const struct of_device_id bd9571mwv_of_match_table[] = { + { .compatible = "rohm,bd9571mwv", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bd9571mwv_of_match_table); + +static const struct i2c_device_id bd9571mwv_id_table[] = { + { "bd9571mwv", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, bd9571mwv_id_table); + +static struct i2c_driver bd9571mwv_driver = { + .driver = { + .name = "bd9571mwv", + .of_match_table = bd9571mwv_of_match_table, + }, + .probe = bd9571mwv_probe, + .remove = bd9571mwv_remove, + .id_table = bd9571mwv_id_table, +}; +module_i2c_driver(bd9571mwv_driver); + +MODULE_AUTHOR("Marek Vasut "); +MODULE_DESCRIPTION("BD9571MWV PMIC Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/bd9571mwv.h b/include/linux/mfd/bd9571mwv.h new file mode 100644 index 000000000000..f0708ba4cbba --- /dev/null +++ b/include/linux/mfd/bd9571mwv.h @@ -0,0 +1,115 @@ +/* + * ROHM BD9571MWV-M driver + * + * Copyright (C) 2017 Marek Vasut + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the TPS65086 driver + */ + +#ifndef __LINUX_MFD_BD9571MWV_H +#define __LINUX_MFD_BD9571MWV_H + +#include +#include + +/* List of registers for BD9571MWV */ +#define BD9571MWV_VENDOR_CODE 0x00 +#define BD9571MWV_VENDOR_CODE_VAL 0xdb +#define BD9571MWV_PRODUCT_CODE 0x01 +#define BD9571MWV_PRODUCT_CODE_VAL 0x60 +#define BD9571MWV_PRODUCT_REVISION 0x02 + +#define BD9571MWV_I2C_FUSA_MODE 0x10 +#define BD9571MWV_I2C_MD2_E1_BIT_1 0x11 +#define BD9571MWV_I2C_MD2_E1_BIT_2 0x12 + +#define BD9571MWV_BKUP_MODE_CNT 0x20 +#define BD9571MWV_BKUP_MODE_STATUS 0x21 +#define BD9571MWV_BKUP_RECOVERY_CNT 0x22 +#define BD9571MWV_BKUP_CTRL_TIM_CNT 0x23 +#define BD9571MWV_WAITBKUP_WDT_CNT 0x24 +#define BD9571MWV_128H_TIM_CNT 0x26 +#define BD9571MWV_QLLM_CNT 0x27 + +#define BD9571MWV_AVS_SET_MONI 0x31 +#define BD9571MWV_AVS_SET_MONI_MASK 0x3 +#define BD9571MWV_AVS_VD09_VID(n) (0x32 + (n)) +#define BD9571MWV_AVS_DVFS_VID(n) (0x36 + (n)) + +#define BD9571MWV_VD18_VID 0x42 +#define BD9571MWV_VD25_VID 0x43 +#define BD9571MWV_VD33_VID 0x44 + +#define BD9571MWV_DVFS_VINIT 0x50 +#define BD9571MWV_DVFS_SETVMAX 0x52 +#define BD9571MWV_DVFS_BOOSTVID 0x53 +#define BD9571MWV_DVFS_SETVID 0x54 +#define BD9571MWV_DVFS_MONIVDAC 0x55 +#define BD9571MWV_DVFS_PGD_CNT 0x56 + +#define BD9571MWV_GPIO_DIR 0x60 +#define BD9571MWV_GPIO_OUT 0x61 +#define BD9571MWV_GPIO_IN 0x62 +#define BD9571MWV_GPIO_DEB 0x63 +#define BD9571MWV_GPIO_INT_SET 0x64 +#define BD9571MWV_GPIO_INT 0x65 +#define BD9571MWV_GPIO_INTMASK 0x66 + +#define BD9571MWV_REG_KEEP(n) (0x70 + (n)) + +#define BD9571MWV_PMIC_INTERNAL_STATUS 0x80 +#define BD9571MWV_PROT_ERROR_STATUS0 0x81 +#define BD9571MWV_PROT_ERROR_STATUS1 0x82 +#define BD9571MWV_PROT_ERROR_STATUS2 0x83 +#define BD9571MWV_PROT_ERROR_STATUS3 0x84 +#define BD9571MWV_PROT_ERROR_STATUS4 0x85 + +#define BD9571MWV_INT_INTREQ 0x90 +#define BD9571MWV_INT_INTREQ_MD1_INT BIT(0) +#define BD9571MWV_INT_INTREQ_MD2_E1_INT BIT(1) +#define BD9571MWV_INT_INTREQ_MD2_E2_INT BIT(2) +#define BD9571MWV_INT_INTREQ_PROT_ERR_INT BIT(3) +#define BD9571MWV_INT_INTREQ_GP_INT BIT(4) +#define BD9571MWV_INT_INTREQ_128H_OF_INT BIT(5) +#define BD9571MWV_INT_INTREQ_WDT_OF_INT BIT(6) +#define BD9571MWV_INT_INTREQ_BKUP_TRG_INT BIT(7) +#define BD9571MWV_INT_INTMASK 0x91 + +#define BD9571MWV_ACCESS_KEY 0xff + +/* Define the BD9571MWV IRQ numbers */ +enum bd9571mwv_irqs { + BD9571MWV_IRQ_MD1, + BD9571MWV_IRQ_MD2_E1, + BD9571MWV_IRQ_MD2_E2, + BD9571MWV_IRQ_PROT_ERR, + BD9571MWV_IRQ_GP, + BD9571MWV_IRQ_128H_OF, + BD9571MWV_IRQ_WDT_OF, + BD9571MWV_IRQ_BKUP_TRG, +}; + +/** + * struct bd9571mwv - state holder for the bd9571mwv driver + * + * Device data may be used to access the BD9571MWV chip + */ +struct bd9571mwv { + struct device *dev; + struct regmap *regmap; + + /* IRQ Data */ + int irq; + struct regmap_irq_chip_data *irq_data; +}; + +#endif /* __LINUX_MFD_BD9571MWV_H */ -- 2.11.0