Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264913AbTFETWX (ORCPT ); Thu, 5 Jun 2003 15:22:23 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264917AbTFETWW (ORCPT ); Thu, 5 Jun 2003 15:22:22 -0400 Received: from 81-5-136-19.dsl.eclipse.net.uk ([81.5.136.19]:33920 "EHLO vlad.carfax.org.uk") by vger.kernel.org with ESMTP id S264913AbTFETVq (ORCPT ); Thu, 5 Jun 2003 15:21:46 -0400 Date: Thu, 5 Jun 2003 20:35:14 +0100 From: Hugo Mills To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, andre@linux-ide.org, alan@redhat.com Subject: SiI3112 (Adaptec 1210SA): no devices Message-ID: <20030605193514.GB1542@carfax.org.uk> Mail-Followup-To: Hugo Mills , linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, andre@linux-ide.org, alan@redhat.com Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="gatW/ieO32f1wygP" Content-Disposition: inline X-GPG-Fingerprint: B997 A9F1 782D D1FD 9F87 5542 B2C2 7BC2 1C33 5860 X-GPG-Key: 1C335860 X-Parrot: It is no more. It has joined the choir invisible. User-Agent: Mutt/1.5.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24429 Lines: 633 --gatW/ieO32f1wygP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I've just taken delivery of a shiny new Adaptec 1210SA Serial-ATA adapter and a 120Gb Seagate Barracuda native SATA drive. Problem is, the kernel driver doesn't seem to notice this device on boot -- nothing at all appears relating to this device in the boot messages. Can you help me? I'm not a kernel hacker, I'm afraid, but I can apply patches and test stuff for this card+drive as much as you like... (The card is configured in its on-board BIOS with a single disk as JBOD). Thanks, Hugo. Kernel version: 2.4.21-rc7-ac1 vlad:~# dmesg Linux version 2.4.21-rc7-ac1 (root@vlad) (gcc version 3.3 (Debian)) #1 Thu Jun 5 14:12:04 BST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013ffc000 (usable) BIOS-e820: 0000000013ffc000 - 0000000013fff000 (ACPI data) BIOS-e820: 0000000013fff000 - 0000000014000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 319MB LOWMEM available. On node 0 totalpages: 81916 zone(0): 4096 pages. zone(1): 77820 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=Linux ro root=816 Initializing CPU#0 Detected 501.149 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 999.42 BogoMIPS Memory: 321400k/327664k available (1438k kernel code, 5868k reserved, 554k data, 84k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Enabling new style K6 write allocation for 319 Mb CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: AMD K6 PCI: PCI BIOS revision 2.10 entry at 0xf06c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router ALI [10b9/1533] at 00:07.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 eth0: 3c5x9 at 0x300, 10baseT port, address 00 20 af 93 e3 69, IRQ 5. 3c509.c:1.19 16Oct2002 becker@scyld.com http://www.scyld.com/network/3c509.html Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 262M agpgart: Detected Ali M1541 chipset agpgart: AGP aperture is 64M @ 0xd8000000 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 00:0f.0 ALI15X3: chipset revision 193 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 90648D3, ATA DISK drive blk: queue c0331dc0, I/O limit 4095Mb (mask 0xffffffff) hdc: Pioneer DVD-ROM ATAPIModel DVD-120S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 12656448 sectors (6480 MB) w/512KiB Cache, CHS=787/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 11 for device 00:0c.0 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: FUJITSU Model: MAJ3182M SUN18G Rev: 0503 Type: Direct-Access ANSI SCSI revision: 02 (scsi0:A:9): 40.000MB/s transfers (20.000MHz, offset 127, 16bit) Vendor: IBM Model: DRVS18D Rev: 0100 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:10): 40.000MB/s transfers (20.000MHz, offset 15, 16bit) Vendor: FUJITSU Model: MAN3184MP Rev: 5507 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:A:11): 40.000MB/s transfers (20.000MHz, offset 127, 16bit) scsi0:A:9:0: Tagged Queuing enabled. Depth 253 scsi0:A:10:0: Tagged Queuing enabled. Depth 253 scsi0:A:11:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 9, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 10, lun 0 Attached scsi disk sdc at scsi0, channel 0, id 11, lun 0 SCSI device sda: 35378533 512-byte hdwr sectors (18114 MB) /dev/scsi/host0/bus0/target9/lun0: p1 < p5 p6 p7 p8 > SCSI device sdb: 35879135 512-byte hdwr sectors (18370 MB) /dev/scsi/host0/bus0/target10/lun0: p1 < p5 p6 p7 p8 p9 > SCSI device sdc: 35566478 512-byte hdwr sectors (18210 MB) /dev/scsi/host0/bus0/target11/lun0: p1 < p5 p6 p7 p8 p9 > md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 713.200 MB/sec 32regs : 357.200 MB/sec pII_mmx : 831.200 MB/sec p5_mmx : 850.400 MB/sec raid5: using function: p5_mmx (850.400 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) device-mapper: 1.0.3-ioctl-bk (2002-08-5) initialised: lvm-devel@lists.sistina.com NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 32768 bind 65536) ip_conntrack version 2.1 (2559 buckets, 20472 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 08:16) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 84k freed Adding Swap: 248968k swap-space (priority 0) Adding Swap: 248968k swap-space (priority 0) Adding Swap: 248968k swap-space (priority 0) Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers [events: 0000004d] [events: 0000004d] [events: 0000004d] md: autorun ... md: considering scsi/host0/bus0/target11/lun0/part5 ... md: adding scsi/host0/bus0/target11/lun0/part5 ... md: adding scsi/host0/bus0/target10/lun0/part5 ... md: adding scsi/host0/bus0/target9/lun0/part5 ... md: created md0 [loads of md messages snipped] md: scsi/host0/bus0/target11/lun0/part9 [events: 00001edb]<6>(write) scsi/host0/bus0/target11/lun0/part9's sb offset: 15309824 md: ... autorun DONE. raid5: switching cache buffer size, 4096 --> 1024 raid5: switching cache buffer size, 1024 --> 4096 reiserfs: checking transaction log (device fe:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 raid5: switching cache buffer size, 4096 --> 1024 raid5: switching cache buffer size, 1024 --> 4096 reiserfs: checking transaction log (device fe:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 raid5: switching cache buffer size, 4096 --> 1024 raid5: switching cache buffer size, 1024 --> 4096 reiserfs: checking transaction log (device fe:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 raid5: switching cache buffer size, 4096 --> 1024 raid5: switching cache buffer size, 1024 --> 4096 reiserfs: checking transaction log (device fe:00) ... Using r5 hash to sort names ReiserFS version 3.6.25 eth0: Setting 3c5x9/3c5x9B half-duplex mode if_port: 0, sw_info: 0431 eth0: Setting Rx mode to 1 addresses. PCI: Found IRQ 9 for device 00:02.0 PCI: Setting latency timer of device 00:02.0 to 64 usb-ohci.c: USB OHCI at membase 0xd4c4a000, IRQ 9 usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller usb.c: new USB bus registered, assigned bus number 1 [loads of USB messages snipped] hub.c: port 2, portstatus 100, change 0, 12 Mb/s hdc: attached ide-cdrom driver. hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.12 [drm] AGP 0.99 Aperture @ 0xd8000000 64MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 vlad:~# lspci -vvv 00:00.0 Host bridge: ALi Corporation M1541 (rev 04) Subsystem: ALi Corporation ALI M1541 Aladdin V/V+ AGP System Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 00:0c.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) Subsystem: Adaptec 29160N Ultra160 SCSI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR-