Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751224AbdFBHEr (ORCPT ); Fri, 2 Jun 2017 03:04:47 -0400 Received: from regular1.263xmail.com ([211.150.99.137]:54377 "EHLO regular1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751148AbdFBHEi (ORCPT ); Fri, 2 Jun 2017 03:04:38 -0400 X-263anti-spam: KSV:0; X-MAIL-GRAY: 0 X-MAIL-DELIVERY: 1 X-KSVirus-check: 0 X-ABS-CHECKED: 4 X-RL-SENDER: william.wu@rock-chips.com X-FST-TO: heiko@sntech.de X-SENDER-IP: 58.22.7.114 X-LOGIN-NAME: william.wu@rock-chips.com X-UNIQUE-TAG: X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 From: William Wu To: heiko@sntech.de Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, frank.wang@rock-chips.com, huangtao@rock-chips.com, daniel.meng@rock-chips.com, william.wu@rock-chips.com Subject: [PATCH v2 2/2] ARM: dts: rockchip: enable usb for rk3229 evb board Date: Fri, 2 Jun 2017 15:04:25 +0800 Message-Id: <1496387065-21073-3-git-send-email-william.wu@rock-chips.com> X-Mailer: git-send-email 2.0.0 In-Reply-To: <1496387065-21073-1-git-send-email-william.wu@rock-chips.com> References: <1496387065-21073-1-git-send-email-william.wu@rock-chips.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1964 Lines: 106 Rockchip's rk3229 evaluation board has one usb otg controller and three usb host controllers. Each usb controller connect with one usb2 phy port through UTMI+ interface. And the three usb host interfaces use the same GPIO VBUS drive. Let's enable them to support usb on rk3229 evb board. Signed-off-by: William Wu --- arch/arm/boot/dts/rk3229-evb.dts | 74 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 275092a..1b55192 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -58,6 +58,17 @@ #clock-cells = <0>; }; + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; + vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -85,6 +96,69 @@ status = "okay"; }; +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &uart2 { status = "okay"; }; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; -- 2.0.0