Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751267AbdFBIwL (ORCPT ); Fri, 2 Jun 2017 04:52:11 -0400 Received: from mail-it0-f53.google.com ([209.85.214.53]:34390 "EHLO mail-it0-f53.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751161AbdFBIwI (ORCPT ); Fri, 2 Jun 2017 04:52:08 -0400 From: Guodong Xu To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, xuwei5@hisilicon.com, catalin.marinas@arm.com, will.deacon@arm.com, lgirdwood@gmail.com, broonie@kernel.org, khilman@baylibre.com, arnd@arndb.de, gregory.clement@free-electrons.com, horms+renesas@verge.net.au, olof@lixom.net, thomas.petazzoni@free-electrons.com, yamada.masahiro@socionext.com, riku.voipio@linaro.org, treding@nvidia.com, krzk@kernel.org, eric@anholt.net, damm+renesas@opensource.se, ard.biesheuvel@linaro.org, linus.walleij@linaro.org, geert+renesas@glider.be Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, hw.wangxiaoyin@hisilicon.com, Guodong Xu Subject: [PATCH v2 3/6] regulator: hi6421v530: add driver for hi6421v530 voltage regulator Date: Fri, 2 Jun 2017 16:51:14 +0800 Message-Id: <20170602085117.27474-4-guodong.xu@linaro.org> X-Mailer: git-send-email 2.10.2 In-Reply-To: <20170602085117.27474-1-guodong.xu@linaro.org> References: <20170602085117.27474-1-guodong.xu@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8308 Lines: 263 From: Wang Xiaoyin add the driver for hi6421v530 voltage regulator Signed-off-by: Wang Xiaoyin Signed-off-by: Guodong Xu --- drivers/regulator/Kconfig | 10 ++ drivers/regulator/Makefile | 1 + drivers/regulator/hi6421v530-regulator.c | 209 +++++++++++++++++++++++++++++++ 3 files changed, 220 insertions(+) create mode 100644 drivers/regulator/hi6421v530-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 48db87d..78cd8d8 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -296,6 +296,16 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_HI6421V530 + tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" + depends on MFD_HI6421_PMIC && OF + help + This driver provides support for the voltage regulators on + HiSilicon Hi6421v530 PMU / Codec IC. + Hi6421v530 is a multi-function device which, on regulator part, + provides 5 general purpose LDOs, and all of them come with support + to either ECO (idle) or sleep mode. + config REGULATOR_HI655X tristate "Hisilicon HI655X PMIC regulators support" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index dc3503f..36e2b75 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o +obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o diff --git a/drivers/regulator/hi6421v530-regulator.c b/drivers/regulator/hi6421v530-regulator.c new file mode 100644 index 0000000..b341484 --- /dev/null +++ b/drivers/regulator/hi6421v530-regulator.c @@ -0,0 +1,209 @@ +/* + * Device driver for regulators in Hi6421V530 IC + * + * Copyright (c) <2017> HiSilicon Technologies Co., Ltd. + * http://www.hisilicon.com + * Copyright (c) <2017> Linaro Ltd. + * http://www.linaro.org + * + * Author: Wang Xiaoyin + * Guodong Xu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * struct hi6421v530_regulator_info - hi6421v530 regulator information + * @desc: regulator description + * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep + * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only + */ +struct hi6421v530_regulator_info { + struct regulator_desc rdesc; + u8 mode_mask; + u32 eco_microamp; +}; + +/* HI6421v530 regulators */ +enum hi6421v530_regulator_id { + HI6421V530_LDO3, + HI6421V530_LDO9, + HI6421V530_LDO11, + HI6421V530_LDO15, + HI6421V530_LDO16, +}; + +static const unsigned int ldo_3_voltages[] = { + 1800000, 1825000, 1850000, 1875000, + 1900000, 1925000, 1950000, 1975000, + 2000000, 2025000, 2050000, 2075000, + 2100000, 2125000, 2150000, 2200000, +}; + +static const unsigned int ldo_9_11_voltages[] = { + 1750000, 1800000, 1825000, 2800000, + 2850000, 2950000, 3000000, 3300000, +}; + +static const unsigned int ldo_15_16_voltages[] = { + 1750000, 1800000, 2400000, 2600000, + 2700000, 2850000, 2950000, 3000000, +}; + +static const struct regulator_ops hi6421v530_ldo_ops; + +#define HI6421V530_LDO_ENABLE_TIME (350) + +/* + * _id - LDO id name string + * v_table - voltage table + * vreg - voltage select register + * vmask - voltage select mask + * ereg - enable register + * emask - enable mask + * odelay - off/on delay time in uS + * ecomask - eco mode mask + * ecoamp - eco mode load uppler limit in uA + */ +#define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask, \ + odelay, ecomask, ecoamp) { \ + .rdesc = { \ + .name = #_ID, \ + .of_match = of_match_ptr(#_ID), \ + .regulators_node = of_match_ptr("regulators"), \ + .ops = &hi6421v530_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = HI6421V530_##_ID, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(v_table), \ + .volt_table = v_table, \ + .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \ + .vsel_mask = vmask, \ + .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \ + .enable_mask = emask, \ + .enable_time = HI6421V530_LDO_ENABLE_TIME, \ + .off_on_delay = odelay, \ + }, \ + .mode_mask = ecomask, \ + .eco_microamp = ecoamp, \ +} + +/* HI6421V530 regulator information */ + +static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = { + HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2, + 20000, 0x6, 8000), + HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2, + 40000, 0x6, 8000), + HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2, + 40000, 0x6, 8000), + HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2, + 40000, 0x6, 8000), + HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2, + 40000, 0x6, 8000), +}; + +static unsigned int hi6421v530_regulator_ldo_get_mode( + struct regulator_dev *rdev) +{ + struct hi6421v530_regulator_info *info; + unsigned int reg_val; + + info = rdev_get_drvdata(rdev); + regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val); + + if (reg_val & (info->mode_mask)) + return REGULATOR_MODE_IDLE; + + return REGULATOR_MODE_NORMAL; +} + +static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct hi6421v530_regulator_info *info; + unsigned int new_mode; + + info = rdev_get_drvdata(rdev); + switch (mode) { + case REGULATOR_MODE_NORMAL: + new_mode = 0; + break; + case REGULATOR_MODE_IDLE: + new_mode = info->mode_mask; + break; + default: + return -EINVAL; + } + + regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + info->mode_mask, new_mode); + + return 0; +} + + +static const struct regulator_ops hi6421v530_ldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_mode = hi6421v530_regulator_ldo_get_mode, + .set_mode = hi6421v530_regulator_ldo_set_mode, +}; + +static int hi6421v530_regulator_probe(struct platform_device *pdev) +{ + struct hi6421_pmic *pmic; + struct regulator_dev *rdev; + struct regulator_config config = { }; + unsigned int i; + + pmic = dev_get_drvdata(pdev->dev.parent); + if (!pmic) { + dev_err(&pdev->dev, "no pmic in the regulator parent node\n"); + return -ENODEV; + } + + for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) { + config.dev = pdev->dev.parent; + config.regmap = pmic->regmap; + config.driver_data = &hi6421v530_regulator_info[i]; + + rdev = devm_regulator_register(&pdev->dev, + &hi6421v530_regulator_info[i].rdesc, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + hi6421v530_regulator_info[i].rdesc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static struct platform_driver hi6421v530_regulator_driver = { + .driver = { + .name = "hi6421v530-regulator", + }, + .probe = hi6421v530_regulator_probe, +}; +module_platform_driver(hi6421v530_regulator_driver); + +MODULE_AUTHOR("Wang Xiaoyin "); +MODULE_DESCRIPTION("Hi6421v530 regulator driver"); +MODULE_LICENSE("GPL v2"); -- 2.10.2