Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751235AbdFBKHF (ORCPT ); Fri, 2 Jun 2017 06:07:05 -0400 Received: from mail.free-electrons.com ([62.4.15.54]:35702 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751040AbdFBKHC (ORCPT ); Fri, 2 Jun 2017 06:07:02 -0400 From: Thomas Petazzoni To: Thomas Gleixner , Jason Cooper , Marc Zyngier , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring , Ian Campbell , Pawel Moll , Mark Rutland , Kumar Gala , Andrew Lunn , Sebastian Hesselbarth , Gregory Clement Cc: Nadav Haklai , Hanna Hawa , Yehuda Yitschak , Antoine Tenart , linux-arm-kernel@lists.infradead.org, Thomas Petazzoni Subject: [PATCH v2 1/6] dt-bindings: interrupt-controller: add DT binding for the Marvell GICP Date: Fri, 2 Jun 2017 12:06:52 +0200 Message-Id: <1496398017-6487-2-git-send-email-thomas.petazzoni@free-electrons.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1496398017-6487-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1496398017-6487-1-git-send-email-thomas.petazzoni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1573 Lines: 44 This commit adds the Device Tree binding documentation for the Marvell GICP, an extension to the GIC that allows to trigger GIC SPI interrupts using memory transactions. It is used by the ICU unit in the Marvell CP110 block to turn wired interrupts inside the CP into SPI interrupts at the GIC level in the AP. Signed-off-by: Thomas Petazzoni --- .../bindings/interrupt-controller/marvell,gicp.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt new file mode 100644 index 0000000..3fc36963 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt @@ -0,0 +1,24 @@ +Marvell GICP Controller +----------------------- + +GICP is a Marvell extension of the GIC that allows to trigger GIC SPI +interrupts by doing a memory transaction. It is used by the ICU +located in the Marvell CP110 to turn wired interrupts inside the CP +into GIC SPI interrupts. + +Required properties: + +- compatible: Must be "marvell,ap806-gicp" + +- reg: Must be the address and size of the GICP SPI registers + +- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available + for this GICP + +Example: + +gicp_spi: gicp-spi@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; +}; -- 2.7.4