Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754096AbdFGXIy (ORCPT ); Wed, 7 Jun 2017 19:08:54 -0400 Received: from wtarreau.pck.nerim.net ([62.212.114.60]:50977 "EHLO 1wt.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753005AbdFGXIw (ORCPT ); Wed, 7 Jun 2017 19:08:52 -0400 From: Willy Tarreau To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux@roeck-us.net Cc: Johan Hovold , Willy Tarreau Subject: [PATCH 3.10 056/250] USB: serial: mos7720: fix parport use-after-free on probe errors Date: Thu, 8 Jun 2017 00:57:22 +0200 Message-Id: <1496876436-32402-57-git-send-email-w@1wt.eu> X-Mailer: git-send-email 2.8.0.rc2.1.gbe9624a In-Reply-To: <1496876436-32402-1-git-send-email-w@1wt.eu> References: <1496876436-32402-1-git-send-email-w@1wt.eu> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1794 Lines: 53 From: Johan Hovold commit 75dd211e773afcbc264677b0749d1cf7d937ab2d upstream. Do not submit the interrupt URB until after the parport has been successfully registered to avoid another use-after-free in the completion handler when accessing the freed parport private data in case of a racing completion. Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Signed-off-by: Johan Hovold Signed-off-by: Willy Tarreau --- drivers/usb/serial/mos7720.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 6c19dbb..b35726c 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1952,22 +1952,20 @@ static int mos7720_startup(struct usb_serial *serial) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); - /* start the interrupt urb */ - ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); - if (ret_val) - dev_err(&dev->dev, - "%s - Error %d submitting control urb\n", - __func__, ret_val); - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { ret_val = mos7715_parport_init(serial); - if (ret_val < 0) { - usb_kill_urb(serial->port[0]->interrupt_in_urb); + if (ret_val < 0) return ret_val; - } } #endif + /* start the interrupt urb */ + ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); + if (ret_val) { + dev_err(&dev->dev, "failed to submit interrupt urb: %d\n", + ret_val); + } + /* LSR For Port 1 */ read_mos_reg(serial, 0, LSR, &data); dev_dbg(&dev->dev, "LSR:%x\n", data); -- 2.8.0.rc2.1.gbe9624a