Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751873AbdFHUFb (ORCPT ); Thu, 8 Jun 2017 16:05:31 -0400 Received: from mail-lf0-f68.google.com ([209.85.215.68]:33072 "EHLO mail-lf0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751567AbdFHUEv (ORCPT ); Thu, 8 Jun 2017 16:04:51 -0400 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= To: Kishon Vijay Abraham I Cc: Yendapally Reddy Dhananjaya Reddy , Jon Mason , Florian Fainelli , linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Subject: [PATCH V2 5/5] phy: bcm-ns-usb3: add MDIO driver using proper bus layer Date: Thu, 8 Jun 2017 22:04:28 +0200 Message-Id: <20170608200428.9187-6-zajec5@gmail.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170608200428.9187-1-zajec5@gmail.com> References: <20170511132925.14564-1-zajec5@gmail.com> <20170608200428.9187-1-zajec5@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4974 Lines: 170 From: Rafał Miłecki As USB 3.0 PHY is attached to the MDIO bus this module should provide a MDIO driver and use a proper bus layer. This is a proper (cleaner) solution which doesn't require code to know this specific MDIO bus details. It also allows reusing the driver with other MDIO buses. For now keep platform device support in place. We may consider dropping it once MDIO bindings gets used "everywhere". Signed-off-by: Rafał Miłecki --- V2: Select MDIO_DEVICE which was introduced in 4.12. Add info about possible removal of platform driver in the future. --- drivers/phy/broadcom/Kconfig | 1 + drivers/phy/broadcom/phy-bcm-ns-usb3.c | 105 ++++++++++++++++++++++++++++++++- 2 files changed, 105 insertions(+), 1 deletion(-) diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig index d2d99023ec50..517fe0f3e639 100644 --- a/drivers/phy/broadcom/Kconfig +++ b/drivers/phy/broadcom/Kconfig @@ -31,6 +31,7 @@ config PHY_BCM_NS_USB3 depends on ARCH_BCM_IPROC || COMPILE_TEST depends on HAS_IOMEM && OF select GENERIC_PHY + select MDIO_DEVICE help Enable this to support Broadcom USB 3.0 PHY connected to the USB controller on Northstar family. diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c index 2c9a0d5f43d8..a53ae128eadf 100644 --- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c +++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c @@ -16,7 +16,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -52,6 +54,7 @@ struct bcm_ns_usb3 { enum bcm_ns_family family; void __iomem *dmp; void __iomem *ccb_mii; + struct mdio_device *mdiodev; struct phy *phy; int (*phy_write)(struct bcm_ns_usb3 *usb3, u16 reg, u16 value); @@ -183,6 +186,77 @@ static const struct phy_ops ops = { }; /************************************************** + * MDIO driver code + **************************************************/ + +static int bcm_ns_usb3_mdiodev_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value) +{ + struct mdio_device *mdiodev = usb3->mdiodev; + + return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value); +} + +static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + const struct of_device_id *of_id; + struct phy_provider *phy_provider; + struct device_node *syscon_np; + struct bcm_ns_usb3 *usb3; + struct resource res; + int err; + + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->dev = dev; + usb3->mdiodev = mdiodev; + + of_id = of_match_device(bcm_ns_usb3_id_table, dev); + if (!of_id) + return -EINVAL; + usb3->family = (enum bcm_ns_family)of_id->data; + + syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0); + err = of_address_to_resource(syscon_np, 0, &res); + of_node_put(syscon_np); + if (err) + return err; + + usb3->dmp = devm_ioremap_resource(dev, &res); + if (IS_ERR(usb3->dmp)) { + dev_err(dev, "Failed to map DMP regs\n"); + return PTR_ERR(usb3->dmp); + } + + usb3->phy_write = bcm_ns_usb3_mdiodev_phy_write; + + usb3->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb3->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(usb3->phy); + } + + phy_set_drvdata(usb3->phy, usb3); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct mdio_driver bcm_ns_usb3_mdio_driver = { + .mdiodrv = { + .driver = { + .name = "bcm_ns_mdio_usb3", + .of_match_table = bcm_ns_usb3_id_table, + }, + }, + .probe = bcm_ns_usb3_mdio_probe, +}; + +/************************************************** * Platform driver code **************************************************/ @@ -297,6 +371,35 @@ static struct platform_driver bcm_ns_usb3_driver = { .of_match_table = bcm_ns_usb3_id_table, }, }; -module_platform_driver(bcm_ns_usb3_driver); + +static int __init bcm_ns_usb3_module_init(void) +{ + int err; + + /* + * For backward compatibility we register as MDIO and platform driver. + * After getting MDIO binding commonly used (e.g. switching all DT files + * to use it) we should deprecate the old binding and eventually drop + * support for it. + */ + + err = mdio_driver_register(&bcm_ns_usb3_mdio_driver); + if (err) + return err; + + err = platform_driver_register(&bcm_ns_usb3_driver); + if (err) + mdio_driver_unregister(&bcm_ns_usb3_mdio_driver); + + return err; +} +module_init(bcm_ns_usb3_module_init); + +static void __exit bcm_ns_usb3_module_exit(void) +{ + platform_driver_unregister(&bcm_ns_usb3_driver); + mdio_driver_unregister(&bcm_ns_usb3_mdio_driver); +} +module_exit(bcm_ns_usb3_module_exit) MODULE_LICENSE("GPL v2"); -- 2.11.0