Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752974AbdFLVEZ (ORCPT ); Mon, 12 Jun 2017 17:04:25 -0400 Received: from cloudserver094114.home.net.pl ([79.96.170.134]:57147 "EHLO cloudserver094114.home.net.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752706AbdFLVES (ORCPT ); Mon, 12 Jun 2017 17:04:18 -0400 From: "Rafael J. Wysocki" To: Linux ACPI Cc: Linux PCI , Linux PM , Bjorn Helgaas , LKML , Mika Westerberg , Srinivas Pandruvada , Linux USB , Mathias Nyman , Felipe Balbi , Mario Limonciello , Andy Shevchenko , Dominik Brodowski , Hans De Goede , Alan Stern Subject: [PATCH v2 6/8] PCI / PM: Restore PME Enable if skipping wakeup setup Date: Mon, 12 Jun 2017 22:53:36 +0200 Message-ID: <1667474.rysFhR2k32@aspire.rjw.lan> User-Agent: KMail/4.14.10 (Linux/4.12.0-rc1+; KDE/4.14.9; x86_64; ; ) In-Reply-To: <1615075.mBkoKApGGc@aspire.rjw.lan> References: <8918199.uo13RZ8hZk@aspire.rjw.lan> <1615075.mBkoKApGGc@aspire.rjw.lan> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2228 Lines: 66 From: Rafael J. Wysocki The wakeup_prepared PCI device flag is used for preventing subsequent changes of PCI device wakeup settings in the same way (e.g. enabling device wakeup twice in a row). However, in some cases PME Enable may be updated by things like PCI configuration space restoration in the meantime and it may need to be set again even though the rest of the settings need not change, so modify __pci_enable_wake() to do that when it is about to return early. Also, it is reasonable to expect that __pci_enable_wake() will always clear PME Status when invoked to disable device wakeup, so make it do so even if it is going to return early then. Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1805,6 +1805,23 @@ static void __pci_pme_active(struct pci_ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); } +static void pci_pme_restore(struct pci_dev *dev) +{ + u16 pmcsr; + + if (!dev->pme_support) + return; + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + if (dev->wakeup_prepared) { + pmcsr |= PCI_PM_CTRL_PME_ENABLE; + } else { + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + pmcsr |= PCI_PM_CTRL_PME_STATUS; + } + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); +} + /** * pci_pme_active - enable or disable PCI device's PME# function * @dev: PCI device to handle. @@ -1899,9 +1916,14 @@ int __pci_enable_wake(struct pci_dev *de if (enable && !runtime && !device_may_wakeup(&dev->dev)) return -EINVAL; - /* Don't do the same thing twice in a row for one device. */ - if (!!enable == !!dev->wakeup_prepared) + /* + * Don't do the same thing twice in a row for one device, but restore + * PME Enable in case it has been updated by config space restoration. + */ + if (!!enable == !!dev->wakeup_prepared) { + pci_pme_restore(dev); return 0; + } /* * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don