Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752342AbdFNJyo (ORCPT ); Wed, 14 Jun 2017 05:54:44 -0400 Received: from mail-pf0-f179.google.com ([209.85.192.179]:34284 "EHLO mail-pf0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754569AbdFNIYY (ORCPT ); Wed, 14 Jun 2017 04:24:24 -0400 From: Guodong Xu To: robh+dt@kernel.org, mark.rutland@arm.com, xuwei5@hisilicon.com, catalin.marinas@arm.com, will.deacon@arm.com, wangkefeng.wang@huawei.com, xuejiancheng@hisilicon.com, peter.griffin@linaro.org, puck.chen@hisilicon.com, lee.jones@linaro.org, ulf.hansson@linaro.org, bhelgaas@google.com, arnd@arndb.de Cc: zhangfei.gao@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, linux-pci@vger.kernel.org, Jarkko Nikula , Guodong Xu Subject: [PATCH v3 05/21] arm64: dts: Add I2C nodes for Hi3660 Date: Wed, 14 Jun 2017 16:23:22 +0800 Message-Id: <20170614082338.15673-6-guodong.xu@linaro.org> X-Mailer: git-send-email 2.10.2 In-Reply-To: <20170614082338.15673-1-guodong.xu@linaro.org> References: <20170614082338.15673-1-guodong.xu@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3297 Lines: 119 From: Zhangfei Gao Add I2C nodes for Hi3660-hikey960. On HiKey960, I2C0, I2C7 are connected to Low Speed Expansion Connector. I2C1 is connected to ADV7535. I2C3 is connected to USB5734. Cc: Jarkko Nikula Signed-off-by: Zhangfei Gao Signed-off-by: Guodong Xu --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 22 +++++++++ arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 56 +++++++++++++++++++++++ 2 files changed, 78 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 64875a5..1a4d6c5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -29,6 +29,28 @@ }; }; +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + adv7533: adv7533@39 { + status = "ok"; + compatible = "adi,adv7533"; + reg = <0x39>; + }; +}; + +&i2c7 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + &uart5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index f55710a..9abe84e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -186,6 +186,62 @@ #reset-cells = <2>; }; + i2c0: i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd71000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@ffd72000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd72000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>; + resets = <&iomcu_rst 0x20 4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c3: i2c@fdf0c000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0c000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>; + resets = <&crg_rst 0x78 7>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; + status = "disabled"; + }; + + i2c7: i2c@fdf0b000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0b000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>; + resets = <&crg_rst 0x60 14>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>; + status = "disabled"; + }; + uart5: serial@fdf05000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf05000 0x0 0x1000>; -- 2.10.2