Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752433AbdFNUt2 (ORCPT ); Wed, 14 Jun 2017 16:49:28 -0400 Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:55433 "EHLO metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751754AbdFNUt1 (ORCPT ); Wed, 14 Jun 2017 16:49:27 -0400 From: Oleksij Rempel To: devicetree@vger.kernel.org, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , Russell King , Shawn Guo , Fabio Estevam , Ohad Ben-Cohen , Bjorn Andersson , linux-remoteproc@vger.kernel.org Cc: Oleksij Rempel Subject: [RFC PATCH 2/3] remoteproc: imx_rproc: add a NXP/Freescale imx rproc driver Date: Wed, 14 Jun 2017 22:48:54 +0200 Message-Id: <20170614204855.18347-3-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170614204855.18347-1-o.rempel@pengutronix.de> References: <20170614204855.18347-1-o.rempel@pengutronix.de> X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8015 Lines: 315 From: Oleksij Rempel this driver was tested on NXP imx7d but should work on imx6sx as well. It will upload firmware to OCRAM, which shared memory between Cortex A7 and Cortex M4, then turn M4 on. Signed-off-by: Oleksij Rempel --- drivers/remoteproc/Kconfig | 8 ++ drivers/remoteproc/Makefile | 1 + drivers/remoteproc/imx_rproc.c | 264 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 273 insertions(+) create mode 100644 drivers/remoteproc/imx_rproc.c diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index faad69a1a597..8d33bff4f530 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -130,6 +130,14 @@ config ST_SLIM_REMOTEPROC tristate depends on REMOTEPROC +config IMX_REMOTEPROC + tristate "IMX6/7 remoteproc support" + depends on SOC_IMX6SX || SOC_IMX7D + depends on REMOTEPROC + help + TODO, write some thing here + This can be either built-in or a loadable module. + endif # REMOTEPROC endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index ffc5e430df27..d351c25cdb4e 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -19,3 +19,4 @@ qcom_wcnss_pil-y += qcom_wcnss.o qcom_wcnss_pil-y += qcom_wcnss_iris.o obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o +obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c new file mode 100644 index 000000000000..6bef85237a27 --- /dev/null +++ b/drivers/remoteproc/imx_rproc.c @@ -0,0 +1,264 @@ +/* + * Oleksij Rempel + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IMX7D_ENABLE_M4 BIT(3) +#define IMX7D_SW_M4P_RST BIT(2) +#define IMX7D_SW_M4C_RST BIT(1) +#define IMX7D_SW_M4C_NON_SCLR_RST BIT(0) + +#define IMX7D_M4_RST_MASK 0xf + + +#define IMX7D_RPROC_MEM_MAX 2 +enum { + IMX7D_RPROC_IMEM, + IMX7D_RPROC_DMEM, +}; + +static const char *mem_names[IMX7D_RPROC_MEM_MAX] = { + [IMX7D_RPROC_IMEM] = "imem", + [IMX7D_RPROC_DMEM] = "dmem", +}; + +/** + * struct imx_rproc_mem - slim internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @size: Size of the memory region + */ +struct imx_rproc_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + size_t size; +}; + +struct imx_rproc_dcfg { + int offset; +}; + +struct imx_rproc { + struct device *dev; + struct regmap *regmap; + struct rproc *rproc; + const struct imx_rproc_dcfg *dcfg; + struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX]; + struct clk *clk; +}; + +static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = { + .offset = 0xc, +}; + +static int imx_rproc_start(struct rproc *rproc) +{ + struct imx_rproc *priv = rproc->priv; + const struct imx_rproc_dcfg *dcfg = priv->dcfg; + struct device *dev = priv->dev; + int ret; + + ret = clk_enable(priv->clk); + if (ret) { + dev_err(&rproc->dev, "Failed to enable clock\n"); + return ret; + } + + ret = regmap_update_bits(priv->regmap, dcfg->offset, + IMX7D_M4_RST_MASK, + IMX7D_SW_M4C_RST | IMX7D_SW_M4P_RST | IMX7D_ENABLE_M4); + if (ret) { + dev_err(dev, "Filed to enable M4!\n"); + clk_disable(priv->clk); + } + + return ret; +} + +static int imx_rproc_stop(struct rproc *rproc) +{ + struct imx_rproc *priv = rproc->priv; + const struct imx_rproc_dcfg *dcfg = priv->dcfg; + struct device *dev = priv->dev; + int ret; + + ret = regmap_update_bits(priv->regmap, dcfg->offset, + IMX7D_M4_RST_MASK, + IMX7D_SW_M4C_NON_SCLR_RST); + if (ret) + dev_err(dev, "Filed to stop M4!\n"); + + clk_disable(priv->clk); + + return ret; +} + +static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, int len) +{ + struct imx_rproc *priv = rproc->priv; + void *va = NULL; + int i; + + for (i = 0; i < IMX7D_RPROC_MEM_MAX; i++) { + if (da != priv->mem[i].bus_addr) + continue; + + if (len <= priv->mem[i].size) { + /* __force to make sparse happy with type conversion */ + va = (__force void *)priv->mem[i].cpu_addr; + break; + } + } + + dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%p\n", da, len, va); + + return va; +} + +static const struct rproc_ops imx_rproc_ops = { + .start = imx_rproc_start, + .stop = imx_rproc_stop, + .da_to_va = imx_rproc_da_to_va, +}; + +static const struct of_device_id imx_rproc_of_match[] = { + { .compatible = "fsl,imx7d-rproc", .data = &imx_rproc_cfg_imx7d }, + {}, +}; +MODULE_DEVICE_TABLE(of, imx_rproc_of_match); + +static int imx_rproc_addr_init(struct imx_rproc *priv, + struct platform_device *pdev) +{ + int i, err; + struct resource *res; + + /* get imem and dmem */ + for (i = 0; i < ARRAY_SIZE(mem_names); i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + if (!res) + continue; + + priv->mem[i].cpu_addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->mem[i].cpu_addr)) { + dev_err(&pdev->dev, "devm_ioremap_resource failed\n"); + err = PTR_ERR(priv->mem[i].cpu_addr); + return err; + } + priv->mem[i].bus_addr = res->start & 0xffff; + priv->mem[i].size = resource_size(res); + } + + return 0; +} + +static int imx_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct imx_rproc *priv; + struct rproc *rproc; + struct regmap_config config = { .name = "imx_rproc" }; + const struct imx_rproc_dcfg *dcfg; + struct regmap *regmap; + int ret; + + regmap = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(regmap)) { + dev_err(dev, "failed to find syscon\n"); + return PTR_ERR(regmap); + } + regmap_attach_dev(dev, regmap, &config); + + /* set some other name then imx */ + rproc = rproc_alloc(dev, "imx_rproc", &imx_rproc_ops, NULL, sizeof(*priv)); + if (!rproc) { + ret = -ENOMEM; + goto err; + } + + dcfg = of_device_get_match_data(dev); + if (!dcfg) + return -EINVAL; + + priv = rproc->priv; + priv->rproc = rproc; + priv->regmap = regmap; + priv->dcfg = dcfg; + + dev_set_drvdata(dev, rproc); + + ret = imx_rproc_addr_init(priv, pdev); + if (ret) { + dev_err(dev, "filed on imx_rproc_addr_init\n"); + goto err_put_rproc; + } + + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(dev, "Failed to get clock\n"); + return PTR_ERR(priv->clk); + } + + ret = rproc_add(rproc); + if (ret) { + dev_err(dev, "rproc_add failed\n"); + goto err_put_rproc; + } + + ret = clk_prepare(priv->clk); + if (ret) + dev_err(dev, "failed to get clock\n"); + + return ret; + +err_put_rproc: + rproc_free(rproc); +err: + return ret; +} + +static int imx_rproc_remove(struct platform_device *pdev) +{ + struct rproc *rproc = platform_get_drvdata(pdev); + + rproc_del(rproc); + rproc_free(rproc); + + return 0; +} + +static struct platform_driver imx_rproc_driver = { + .probe = imx_rproc_probe, + .remove = imx_rproc_remove, + .driver = { + .name = "imx_rproc", + .of_match_table = imx_rproc_of_match, + }, +}; + +module_platform_driver(imx_rproc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("IMX6/7 remote processor control driver"); +MODULE_AUTHOR("Oleksij Rempel "); -- 2.11.0