Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752554AbdFPHFO (ORCPT ); Fri, 16 Jun 2017 03:05:14 -0400 Received: from mail-pf0-f193.google.com ([209.85.192.193]:33709 "EHLO mail-pf0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752316AbdFPHFM (ORCPT ); Fri, 16 Jun 2017 03:05:12 -0400 From: Jagan Teki X-Google-Original-From: Jagan Teki To: Shawn Guo Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sascha Hauer , Fabio Estevam , Matteo Lisi , Michael Trimarchi , Jagan Teki Subject: [PATCH v4 4/4] ARM: dts: imx6ul-geam: Add Sound card with codec node Date: Fri, 16 Jun 2017 12:34:40 +0530 Message-Id: <1497596680-3186-4-git-send-email-jteki@openedev.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1497596680-3186-1-git-send-email-jteki@openedev.com> References: <1497596680-3186-1-git-send-email-jteki@openedev.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1942 Lines: 75 From: Jagan Teki Add support for Sound card and related codec(via i2c1) nodes on Engicam GEAM6UL variant module boards. Signed-off-by: Jagan Teki --- Changes for v4: - keep sound and related i2c1 on dts Changes for v3: - Replace fsl,imx-audio-sgtl5000 and use simple-audio-card Changes for v2: - Use proper [label:] node-name[@unit-address] for codec - Remove incorrect codec property 'wlf,shared-lrclk' - Remove 'gpr' from sound card node arch/arm/boot/dts/imx6ul-geam.dts | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index e251ad2..571eea7 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -92,6 +92,32 @@ regulator-always-on; regulator-boot-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ul-geam-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; }; &can1 { @@ -151,6 +177,16 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6UL_CLK_OSC>; + clock-names = "mclk"; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; }; &i2c2 { -- 2.7.4