Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752193AbdFTOIh (ORCPT ); Tue, 20 Jun 2017 10:08:37 -0400 Received: from mail.free-electrons.com ([62.4.15.54]:54063 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751120AbdFTOHn (ORCPT ); Tue, 20 Jun 2017 10:07:43 -0400 From: Thomas Petazzoni To: Thomas Gleixner , Jason Cooper , Marc Zyngier , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring , Ian Campbell , Pawel Moll , Mark Rutland , Kumar Gala , Andrew Lunn , Sebastian Hesselbarth , Gregory Clement Cc: linux-arm-kernel@lists.infradead.org, Nadav Haklai , Hanna Hawa , Yehuda Yitschak , Antoine Tenart , =?UTF-8?q?Miqu=C3=A8l=20Raynal?= , Thomas Petazzoni Subject: [PATCH v4 4/6] irqchip: irq-mvebu-icu: new driver for Marvell ICU Date: Tue, 20 Jun 2017 16:07:20 +0200 Message-Id: <20170620140722.31646-5-thomas.petazzoni@free-electrons.com> X-Mailer: git-send-email 2.9.4 In-Reply-To: <20170620140722.31646-1-thomas.petazzoni@free-electrons.com> References: <20170620140722.31646-1-thomas.petazzoni@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11031 Lines: 368 The Marvell ICU unit is found in the CP110 block of the Marvell Armada 7K and 8K SoCs. It collects the wired interrupts of the devices located in the CP110 and turns them into SPI interrupts in the GIC located in the AP806 side of the SoC, by using a memory transaction. Until now, the ICU was configured in a static fashion by the firmware, and Linux was relying on this static configuration. By having Linux configure the ICU, we are more flexible, and we can allocate dynamically the GIC SPI interrupts only for devices that are actually in use. The driver was initially written by Hanna Hawa . Signed-off-by: Thomas Petazzoni --- drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-mvebu-icu.c | 291 +++++++++++++++++++++ .../dt-bindings/interrupt-controller/mvebu-icu.h | 15 ++ 4 files changed, 310 insertions(+) create mode 100644 drivers/irqchip/irq-mvebu-icu.c create mode 100644 include/dt-bindings/interrupt-controller/mvebu-icu.h diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index e527ee5..676232a 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -271,6 +271,9 @@ config IRQ_MXS config MVEBU_GICP bool +config MVEBU_ICU + bool + config MVEBU_ODMI bool select GENERIC_MSI_IRQ_DOMAIN diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 11eb858..18fa5fa 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o obj-$(CONFIG_MVEBU_GICP) += irq-mvebu-gicp.o +obj-$(CONFIG_MVEBU_ICU) += irq-mvebu-icu.o obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o obj-$(CONFIG_MVEBU_PIC) += irq-mvebu-pic.o obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o diff --git a/drivers/irqchip/irq-mvebu-icu.c b/drivers/irqchip/irq-mvebu-icu.c new file mode 100644 index 0000000..efc80ee --- /dev/null +++ b/drivers/irqchip/irq-mvebu-icu.c @@ -0,0 +1,291 @@ +/* + * Copyright (C) 2017 Marvell + * + * Hanna Hawa + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "irq-mvebu-gicp.h" + +/* ICU registers */ +#define ICU_SETSPI_NSR_AL 0x10 +#define ICU_SETSPI_NSR_AH 0x14 +#define ICU_CLRSPI_NSR_AL 0x18 +#define ICU_CLRSPI_NSR_AH 0x1c +#define ICU_INT_CFG(x) (0x100 + 4 * (x)) +#define ICU_INT_ENABLE BIT(24) +#define ICU_IS_EDGE BIT(28) +#define ICU_GROUP_SHIFT 29 + +/* ICU definitions */ +#define ICU_MAX_IRQS 207 +#define ICU_SATA0_ICU_ID 109 +#define ICU_SATA1_ICU_ID 107 + +struct mvebu_icu { + struct irq_chip irq_chip; + void __iomem *base; + struct irq_domain *domain; + struct device *dev; +}; + +struct mvebu_icu_irq_data { + struct mvebu_icu *icu; + unsigned int icu_group; + unsigned int type; +}; + +static void mvebu_icu_write_msg(struct msi_desc *desc, struct msi_msg *msg) +{ + struct irq_data *d = irq_get_irq_data(desc->irq); + struct mvebu_icu_irq_data *icu_irqd = d->chip_data; + struct mvebu_icu *icu = icu_irqd->icu; + unsigned int icu_int; + + if (msg->address_lo) { + /* Configure the ICU with irq number & type */ + icu_int = msg->data | ICU_INT_ENABLE; + if (icu_irqd->type & IRQ_TYPE_EDGE_RISING) + icu_int |= ICU_IS_EDGE; + icu_int |= icu_irqd->icu_group << ICU_GROUP_SHIFT; + } else { + /* De-configure the ICU */ + icu_int = 0; + } + + writel_relaxed(icu_int, icu->base + ICU_INT_CFG(d->hwirq)); + + /* + * The SATA unit has 2 ports, and a dedicated ICU entry per + * port. The ahci sata driver supports only one irq interrupt + * per SATA unit. To solve this conflict, we configure the 2 + * SATA wired interrupts in the south bridge into 1 GIC + * interrupt in the north bridge. Even if only a single port + * is enabled, if sata node is enabled, both interrupts are + * configured (regardless of which port is actually in use). + */ + if (d->hwirq == ICU_SATA0_ICU_ID || d->hwirq == ICU_SATA1_ICU_ID) { + writel_relaxed(icu_int, + icu->base + ICU_INT_CFG(ICU_SATA0_ICU_ID)); + writel_relaxed(icu_int, + icu->base + ICU_INT_CFG(ICU_SATA1_ICU_ID)); + } +} + +static int +mvebu_icu_irq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec, + unsigned long *hwirq, unsigned int *type) +{ + struct mvebu_icu *icu = d->host_data; + unsigned int icu_group; + + /* Check the count of the parameters in dt */ + if (WARN_ON(fwspec->param_count < 3)) { + dev_err(icu->dev, "wrong ICU parameter count %d\n", + fwspec->param_count); + return -EINVAL; + } + + /* Only ICU group type is handled */ + icu_group = fwspec->param[0]; + if (icu_group != ICU_GRP_NSR && icu_group != ICU_GRP_SR && + icu_group != ICU_GRP_SEI && icu_group != ICU_GRP_REI) { + dev_err(icu->dev, "wrong ICU group type %x\n", icu_group); + return -EINVAL; + } + + *hwirq = fwspec->param[1]; + if (*hwirq >= ICU_MAX_IRQS) { + dev_err(icu->dev, "invalid interrupt number %ld\n", *hwirq); + return -EINVAL; + } + + /* Mask the type to prevent wrong DT configuration */ + *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK; + + return 0; +} + +static int +mvebu_icu_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *args) +{ + int err; + unsigned long hwirq; + struct irq_fwspec *fwspec = args; + struct mvebu_icu *icu = platform_msi_get_host_data(domain); + struct mvebu_icu_irq_data *icu_irqd; + + icu_irqd = kmalloc(sizeof(*icu_irqd), GFP_KERNEL); + if (!icu_irqd) + return -ENOMEM; + + err = mvebu_icu_irq_domain_translate(domain, fwspec, &hwirq, + &icu_irqd->type); + if (err) { + dev_err(icu->dev, "failed to translate ICU parameters\n"); + goto free_irqd; + } + + icu_irqd->icu_group = fwspec->param[0]; + icu_irqd->icu = icu; + + err = platform_msi_domain_alloc(domain, virq, nr_irqs); + if (err) { + dev_err(icu->dev, "failed to allocate ICU interrupt in parent domain\n"); + goto free_irqd; + } + + /* Make sure there is no interrupt left pending by the firmware */ + err = irq_set_irqchip_state(virq, IRQCHIP_STATE_PENDING, false); + if (err) + goto free_msi; + + err = irq_domain_set_hwirq_and_chip(domain, virq, hwirq, + &icu->irq_chip, icu_irqd); + if (err) { + dev_err(icu->dev, "failed to set the data to IRQ domain\n"); + goto free_msi; + } + + return 0; + +free_msi: + platform_msi_domain_free(domain, virq, nr_irqs); +free_irqd: + kfree(icu_irqd); + return err; +} + +static void +mvebu_icu_irq_domain_free(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs) +{ + struct irq_data *d = irq_get_irq_data(virq); + struct mvebu_icu_irq_data *icu_irqd = d->chip_data; + + kfree(icu_irqd); + + platform_msi_domain_free(domain, virq, nr_irqs); +} + +static const struct irq_domain_ops mvebu_icu_domain_ops = { + .translate = mvebu_icu_irq_domain_translate, + .alloc = mvebu_icu_irq_domain_alloc, + .free = mvebu_icu_irq_domain_free, +}; + +static int mvebu_icu_probe(struct platform_device *pdev) +{ + struct mvebu_icu *icu; + struct device_node *node = pdev->dev.of_node; + struct device_node *gicp_dn; + struct resource *res; + phys_addr_t setspi, clrspi; + u32 i, icu_int; + int ret; + + icu = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_icu), + GFP_KERNEL); + if (!icu) + return -ENOMEM; + + icu->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + icu->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(icu->base)) { + dev_err(&pdev->dev, "Failed to map icu base address.\n"); + return PTR_ERR(icu->base); + } + + icu->irq_chip.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "ICU.%x", + (unsigned int)res->start); + if (!icu->irq_chip.name) + return -ENOMEM; + + icu->irq_chip.irq_mask = irq_chip_mask_parent; + icu->irq_chip.irq_unmask = irq_chip_unmask_parent; + icu->irq_chip.irq_eoi = irq_chip_eoi_parent; + icu->irq_chip.irq_set_type = irq_chip_set_type_parent; +#ifdef CONFIG_SMP + icu->irq_chip.irq_set_affinity = irq_chip_set_affinity_parent; +#endif + + /* + * We're probed after MSI domains have been resolved, so force + * resolution here. + */ + pdev->dev.msi_domain = of_msi_get_domain(&pdev->dev, node, + DOMAIN_BUS_PLATFORM_MSI); + if (!pdev->dev.msi_domain) + return -EPROBE_DEFER; + + gicp_dn = of_parse_phandle(node, "msi-parent", 0); + if (!gicp_dn) { + dev_err(&pdev->dev, "Missing marvell,gicp property.\n"); + return -ENODEV; + } + + ret = mvebu_gicp_get_doorbells(gicp_dn, &setspi, &clrspi); + if (ret) + return ret; + + /* Set Clear/Set ICU SPI message address in AP */ + writel_relaxed(upper_32_bits(setspi), icu->base + ICU_SETSPI_NSR_AH); + writel_relaxed(lower_32_bits(setspi), icu->base + ICU_SETSPI_NSR_AL); + writel_relaxed(upper_32_bits(clrspi), icu->base + ICU_CLRSPI_NSR_AH); + writel_relaxed(lower_32_bits(clrspi), icu->base + ICU_CLRSPI_NSR_AL); + + /* + * Clean all ICU interrupts with type SPI_NSR, required to + * avoid unpredictable SPI assignments done by firmware. + */ + for (i = 0 ; i < ICU_MAX_IRQS ; i++) { + icu_int = readl(icu->base + ICU_INT_CFG(i)); + if ((icu_int >> ICU_GROUP_SHIFT) == ICU_GRP_NSR) + writel_relaxed(0x0, icu->base + ICU_INT_CFG(i)); + } + + icu->domain = + platform_msi_create_device_domain(&pdev->dev, ICU_MAX_IRQS, + mvebu_icu_write_msg, + &mvebu_icu_domain_ops, icu); + if (!icu->domain) { + dev_err(&pdev->dev, "Failed to create ICU domain\n"); + return -ENOMEM; + } + + return 0; +} + +static const struct of_device_id mvebu_icu_of_match[] = { + { .compatible = "marvell,cp110-icu", }, + {}, +}; + +static struct platform_driver mvebu_icu_driver = { + .probe = mvebu_icu_probe, + .driver = { + .name = "mvebu-icu", + .of_match_table = mvebu_icu_of_match, + }, +}; +builtin_platform_driver(mvebu_icu_driver); diff --git a/include/dt-bindings/interrupt-controller/mvebu-icu.h b/include/dt-bindings/interrupt-controller/mvebu-icu.h new file mode 100644 index 0000000..8249558 --- /dev/null +++ b/include/dt-bindings/interrupt-controller/mvebu-icu.h @@ -0,0 +1,15 @@ +/* + * This header provides constants for the MVEBU ICU driver. + */ + +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MVEBU_ICU_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MVEBU_ICU_H + +/* interrupt specifier cell 0 */ + +#define ICU_GRP_NSR 0x0 +#define ICU_GRP_SR 0x1 +#define ICU_GRP_SEI 0x4 +#define ICU_GRP_REI 0x5 + +#endif -- 2.9.4