Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752717AbdFTV11 (ORCPT ); Tue, 20 Jun 2017 17:27:27 -0400 Received: from mail-io0-f177.google.com ([209.85.223.177]:33272 "EHLO mail-io0-f177.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752151AbdFTV1Z (ORCPT ); Tue, 20 Jun 2017 17:27:25 -0400 MIME-Version: 1.0 In-Reply-To: References: <1493910330-17913-1-git-send-email-jon.mason@broadcom.com> <4e11bb2b-7cec-6a7b-ca2b-88be31a98b7d@redhat.com> <20170508212347.GA3601@broadcom.com> From: Jon Mason Date: Tue, 20 Jun 2017 17:27:23 -0400 Message-ID: Subject: Re: [PATCH] ACPI: SPCR: Use access width to determine mmio usage To: Loc Ho Cc: Jon Masters , Rafael Wysocki , Len Brown , Robert Moore , Lv Zheng , linux-acpi@vger.kernel.org, Linux Kernel Mailing List , devel@acpica.org, BCM Kernel Feedback Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6191 Lines: 144 On Tue, Jun 20, 2017 at 2:33 PM, Loc Ho wrote: > Hi Jon, > >> >> >> >>>>>> The current SPCR code does not check the access width of the mmio, and >> >> >>>>>> uses a default of 8bit register accesses. This prevents devices that >> >> >>>>>> only do 16 or 32bit register accesses from working. By simply checking >> >> >>>>>> this field and setting the mmio string appropriately, this issue can be >> >> >>>>>> corrected. To prevent any legacy issues, the code will default to 8bit >> >> >>>>>> accesses if the value is anything but 16 or 32. >> >> >>>>> >> >> >>>>> Thanks for this. Just as an FYI I've a running discussion with Microsoft >> >> >>>>> about defining additional UART subtypes in the DBG2 for special case >> >> >>>>> UARTs. Specifically, I want to address AppliedMicro's special 8250 dw IP >> >> >>>>> that also has a non-standard clock. At this time, there is general >> >> >>>>> agreement to use the access width for some cases rather than defining >> >> >>>>> yet more subtypes - so your patch is good. >> >> >>>>> >> >> >>>>> Loc/Applied: please track this thread, incorporate feedback, and also >> >> >>>>> track the other general recent discussions of 8250 dw from this week. >> >> >>>> >> >> >>>> Thanks for forward me this patch. This patch does not work with X-Gene >> >> >>>> v1 and v2 SoC's. As BIOS SPCR encodes these info as: >> >> >>>> >> >> >>>> Bit Width: 32 >> >> >>>> Bit Offset: 0 >> >> >>>> Encoded Access Width: 01 (Byte Access) >> >> >>>> >> >> >>>> With this patch, it would use the "mmio" instead the "mmio32" as with >> >> >>>> this patch - https://patchwork.kernel.org/patch/9460959 >> >> >>> >> >> >>> I think this is why we need the DBG2 subtype for Applied X-Gene1. I'm >> >> >>> hoping the update to the SPCR/DBG2 spec is done soon. >> >> >> >> >> >> We can't rely on the BIOS change to support this new subtype as we >> >> >> have system that is already in production deployment. When these >> >> >> system upgrade to new version of the OS (stock, RHELSA, or whatever), >> >> >> they will break. We need the patch from >> >> >> https://patchwork.kernel.org/patch/9460959/ rolled upstream. >> >> > >> >> > There is no reason why the patch you reference cannot co-exist with >> >> > the one I am submitting here. In this case, my patch would set it to >> >> > mmio, then the patch you link above would reset it to mmio32. >> >> > Personally, I would recommend a big, fat comment on why this extra >> >> > step is necessary, but it should work as desired. Alternatively, we >> >> > could add some kind of quirk library (similar to >> >> > qdf2400_erratum_44_present) where the OEM/OEM Table ID is referenced >> >> > and workaround applied. Thoughts? >> >> >> >> That's was my first version but after seeing both versions, I think >> >> they are better solution as it works for more SoC's than just our. As >> >> you had suggested, we should apply your patch and >> >> https://patchwork.kernel.org/patch/9460959. The third patch - >> >> https://patchwork.kernel.org/patch/9462183/ - conflicts with your. >> >> >> >> Summary: >> >> 1. Applied your - https://lkml.org/lkml/2017/5/4/450 >> >> 2. Applied this one - https://patchwork.kernel.org/patch/9460959/ >> >> >> >> -Loc >> > >> > What if we simply applied the following (100% untested) patch to add >> > the quirk framework I was suggesting? It can be applied on top of the >> > patch I submitted previously. >> >> It is a bit more complex that this simple patch. How about this one >> (my original version). As for Jon Master question on McDivitt, not >> sure what they use for the ACPI table for SPCR. If they used our >> reference, then this might work for them too. This version would limit >> to just the existent firmware or until the SPCR table gets changed. >> >> >> tty: 8250: Workaround for APM X-Gene 8250 UART 32-alignment errata >> >> APM X-Gene verion 1 and 2 have an 8250 UART with its register >> aligned to 32-bit. The SPCR always assumes fully compatible >> 8250. This causes no console with ACPI boot as the console >> will not match X-Gene UART port due to the lack of mmio32 >> option. >> >> Signed-off-by: Loc Ho >> --- >> drivers/acpi/spcr.c | 21 +++++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> >> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c >> index 3afa8c1..77b45a0 100644 >> --- a/drivers/acpi/spcr.c >> +++ b/drivers/acpi/spcr.c >> @@ -36,6 +36,25 @@ static bool qdf2400_erratum_44_present(struct >> acpi_table_header *h) >> return false; >> } >> >> +/* >> + * APM X-Gene v1 and v2 UART hardware is an 16550 like device but has its >> + * register aligned to 32-bit. This function detects this errata condition. >> + */ >> +static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb) >> +{ >> + if (tb->interface_type != ACPI_DBG2_16550_COMPATIBLE) >> + return false; >> + >> + if (memcmp(tb->header.oem_id, "APMC0D", ACPI_OEM_ID_SIZE)) >> + return false; >> + >> + if (!memcmp(tb->header.oem_table_id, "XGENESPC", >> + ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 0) >> + return true; >> + >> + return false; >> +} >> + >> /** >> * parse_spcr() - parse ACPI SPCR table and add preferred console >> * >> @@ -115,6 +134,8 @@ int __init parse_spcr(bool earlycon) >> >> if (qdf2400_erratum_44_present(&table->header)) >> uart = "qdf2400_e44"; >> + if (xgene_8250_erratum_present(table)) >> + iotype = "mmio32"; >> >> snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype, >> table->serial_port.address, baud_rate); >> > > I didn't see a follow up email on this. What was the conclusion to > this patch series? I have not received an ack, nack, or gtfo from any of the maintainers of this file. Per ./scripts/get_maintainer.pl drivers/acpi/spcr.c "Rafael J. Wysocki" (supporter:ACPI) Len Brown (supporter:ACPI) linux-acpi@vger.kernel.org (open list:ACPI) linux-kernel@vger.kernel.org (open list) Is there someone else I should be directing this patch through? Thanks, Jon > -Loc