Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264933AbTFLSFF (ORCPT ); Thu, 12 Jun 2003 14:05:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264932AbTFLSFF (ORCPT ); Thu, 12 Jun 2003 14:05:05 -0400 Received: from tao.natur.cuni.cz ([195.113.56.1]:18955 "EHLO tao.natur.cuni.cz") by vger.kernel.org with ESMTP id S264930AbTFLSE5 (ORCPT ); Thu, 12 Jun 2003 14:04:57 -0400 X-Obalka-From: mmokrejs@natur.cuni.cz X-Obalka-To: Date: Thu, 12 Jun 2003 20:18:42 +0200 (CEST) From: =?iso-8859-2?Q?Martin_MOKREJ=A9?= To: Linux Kernel Mailing Subject: ide0: reset: master: ECC circuitry error Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-2 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2269 Lines: 56 Hi, with linux kernel-2.4.21-rc8-acpi-20030522 and I see the following in dmesg output: Freeing unused kernel memory: 132k freed eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest } hda: status timeout: status=0xd0 { Busy } hda: DMA disabled hda: drive not ready for command hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest } hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hda: set_drive_speed_status: error=0x04 { DriveStatusError } ide0: reset: master: ECC circuitry error I saw this with earlier kernels ... In principle the laptop ASUS 3800C works fine. It happens only when "hdparm -d1 /dev/discs/disc0/disc" is executed during boot. The ide devices are: hda: HITACHI_DK23EA-60, ATA DISK drive blk: queue c04429a0, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-R2212, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 117210240 sectors (60012 MB) w/2048KiB Cache, CHS=7296/255/63, UDMA(100) hdc: attached ide-scsi driver. Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1713 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Any ideas how to reproduce this or even better, how to get rid of it? Thanks. -- Martin Mokrejs , PGP5.0i key is at http://www.natur.cuni.cz/~mmokrejs MIPS / Institute for Bioinformatics GSF - National Research Center for Environment and Health Ingolstaedter Landstrasse 1, D-85764 Neuherberg, Germany tel.: +49-89-3187 3683 , fax:?+49-89-3187 3585 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/