Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754369AbdFWOcI (ORCPT ); Fri, 23 Jun 2017 10:32:08 -0400 Received: from smtprelay.synopsys.com ([198.182.60.111]:36501 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754301AbdFWOcF (ORCPT ); Fri, 23 Jun 2017 10:32:05 -0400 From: Eugeniy Paltsev To: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org, Vineet Gupta , Alexey Brodkin , Rob Herring , devicetree@vger.kernel.org, Eugeniy Paltsev Subject: [PATCH 3/3 v5] ARC: hsdk: initial port for HSDK board Date: Fri, 23 Jun 2017 17:31:46 +0300 Message-Id: <20170623143146.14281-4-Eugeniy.Paltsev@synopsys.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170623143146.14281-1-Eugeniy.Paltsev@synopsys.com> References: <20170623143146.14281-1-Eugeniy.Paltsev@synopsys.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13776 Lines: 415 From: Alexey Brodkin This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Signed-off-by: Alexey Brodkin Signed-off-by: Eugeniy Paltsev --- Documentation/devicetree/bindings/arc/hsdk.txt | 7 ++ arch/arc/Kconfig | 1 + arch/arc/Makefile | 1 + arch/arc/boot/dts/hsdk.dts | 150 +++++++++++++++++++++++++ arch/arc/configs/hsdk_defconfig | 72 ++++++++++++ arch/arc/kernel/devtree.c | 5 +- arch/arc/plat-hsdk/Kconfig | 12 ++ arch/arc/plat-hsdk/Makefile | 9 ++ arch/arc/plat-hsdk/platform.c | 53 +++++++++ 9 files changed, 308 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/arc/hsdk.txt create mode 100644 arch/arc/boot/dts/hsdk.dts create mode 100644 arch/arc/configs/hsdk_defconfig create mode 100644 arch/arc/plat-hsdk/Kconfig create mode 100644 arch/arc/plat-hsdk/Makefile create mode 100644 arch/arc/plat-hsdk/platform.c diff --git a/Documentation/devicetree/bindings/arc/hsdk.txt b/Documentation/devicetree/bindings/arc/hsdk.txt new file mode 100644 index 0000000..be50654 --- /dev/null +++ b/Documentation/devicetree/bindings/arc/hsdk.txt @@ -0,0 +1,7 @@ +Synopsys DesignWare ARC HS Development Kit Device Tree Bindings +--------------------------------------------------------------------------- + +ARC HSDK Board with quad-core ARC HS38x4 in silicon. + +Required root node properties: + - compatible = "snps,hsdk"; diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 75e5276..825a112 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -101,6 +101,7 @@ source "arch/arc/plat-tb10x/Kconfig" source "arch/arc/plat-axs10x/Kconfig" #New platform adds here source "arch/arc/plat-eznps/Kconfig" +source "arch/arc/plat-hsdk/Kconfig" endmenu diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 44ef35d..55ca925 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -111,6 +111,7 @@ core-$(CONFIG_ARC_PLAT_SIM) += arch/arc/plat-sim/ core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/ core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/ core-$(CONFIG_ARC_PLAT_EZNPS) += arch/arc/plat-eznps/ +core-$(CONFIG_ARC_PLAT_HSDK) += arch/arc/plat-hsdk/ ifdef CONFIG_ARC_PLAT_EZNPS KBUILD_CPPFLAGS += -I$(srctree)/arch/arc/plat-eznps/include diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts new file mode 100644 index 0000000..6a4e471 --- /dev/null +++ b/arch/arc/boot/dts/hsdk.dts @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Device Tree for ARC HS Development Kit + */ +/dts-v1/; + +/include/ "skeleton_hs_idu.dtsi" + +#include + +/ { + model = "snps,hsdk"; + compatible = "snps,hsdk"; + + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + cpu { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <1000000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&idu_intc>; + + ranges = <0x00000000 0xf0000000 0x10000000>; + + uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33330000>; + interrupts = <6>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + mmcclk_ciu: mmcclk_ciu { + compatible = "fixed-clock"; + clock-frequency = <100000000>; + #clock-cells = <0>; + }; + + mmcclk_biu: mmcclk_biu { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + ethernet@8000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = <0x8000 0x2000>; + interrupts = <10>; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,pbl = <32>; + clocks = <&gmacclk>; + clock-names = "stmmaceth"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + }; + }; + }; + + ohci@60000 { + compatible = "generic-ohci"; + reg = <0x60000 0x100>; + interrupts = <15>; + }; + + ehci@40000 { + compatible = "generic-ehci"; + reg = <0x40000 0x100>; + interrupts = <15>; + }; + + mmc@a000 { + compatible = "altr,socfpga-dw-mshc"; + reg = <0xa000 0x400>; + num-slots = <1>; + fifo-depth = <16>; + card-detect-delay = <200>; + clocks = <&mmcclk_biu>, <&mmcclk_ciu>; + clock-names = "biu", "ciu"; + interrupts = <12>; + bus-width = <4>; + }; + }; + + memory { + #address-cells = <1>; + #size-cells = <1>; + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GiB */ + }; +}; diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig new file mode 100644 index 0000000..137ef35 --- /dev/null +++ b/arch/arc/configs/hsdk_defconfig @@ -0,0 +1,72 @@ +CONFIG_DEFAULT_HOSTNAME="ARCLinux" +CONFIG_SYSVIPC=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_ARC_PLAT_HSDK=y +CONFIG_ISA_ARCV2=y +CONFIG_SMP=y +CONFIG_LINUX_LINK_BASE=0x90000000 +CONFIG_KERNEL_RAM_BASE_ADDRESS=0x80000000 +CONFIG_ARC_BUILTIN_DTB_NAME="hsdk" +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +CONFIG_MICREL_PHY=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_DW=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_STRIP_ASM_SYMS=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c index 3b67f53..521ef35 100644 --- a/arch/arc/kernel/devtree.c +++ b/arch/arc/kernel/devtree.c @@ -29,8 +29,9 @@ static void __init arc_set_early_base_baud(unsigned long dt_root) { if (of_flat_dt_is_compatible(dt_root, "abilis,arc-tb10x")) arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */ - else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp")) - arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x) */ + else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") || + of_flat_dt_is_compatible(dt_root, "snps,hsdk")) + arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x & HSDK) */ else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps")) arc_base_baud = 800000000; /* Fixed 800MHz clk (NPS) */ else diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig new file mode 100644 index 0000000..29dffed --- /dev/null +++ b/arch/arc/plat-hsdk/Kconfig @@ -0,0 +1,12 @@ +# +# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +menuconfig ARC_PLAT_HSDK + bool "ARC HS Development Kit board" + help + Support for ARC HS Development Kit board diff --git a/arch/arc/plat-hsdk/Makefile b/arch/arc/plat-hsdk/Makefile new file mode 100644 index 0000000..9a50c51 --- /dev/null +++ b/arch/arc/plat-hsdk/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# + +obj-y := platform.o diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c new file mode 100644 index 0000000..ce141c6 --- /dev/null +++ b/arch/arc/plat-hsdk/platform.c @@ -0,0 +1,53 @@ +/* + * ARC HSDK Platform support code + * + * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#define ARC_CCM_UNUSED_ADDR 0x60000000 + +/* + * By default ICCM is mapped to 0x7z while this area is used for + * Virtual kernel mappings, so move it to currently unused area. + */ +static void __init relocate_iccm(void) +{ + if (cpuinfo_arc700[smp_processor_id()].iccm.sz) + write_aux_reg(ARC_REG_AUX_ICCM, ARC_CCM_UNUSED_ADDR); +} + +/* + * By default DCCM is mapped to 0x8z while this area is used by kernel, + * so move it to currently unused area. + */ +static void __init relocate_dccm(void) +{ + if (cpuinfo_arc700[smp_processor_id()].dccm.sz) + write_aux_reg(ARC_REG_AUX_DCCM, ARC_CCM_UNUSED_ADDR); +} + +static void __init hsdk_init_per_cpu(unsigned int cpu) +{ + relocate_iccm(); + relocate_dccm(); +} + +static const char *hsdk_compat[] __initconst = { + "snps,hsdk", + NULL, +}; + +MACHINE_START(SIMULATION, "hsdk") + .dt_compat = hsdk_compat, + .init_per_cpu = hsdk_init_per_cpu, +MACHINE_END -- 2.9.3