Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752352AbdFZTaZ (ORCPT ); Mon, 26 Jun 2017 15:30:25 -0400 Received: from mx0a-001b2d01.pphosted.com ([148.163.156.1]:60032 "EHLO mx0a-001b2d01.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751456AbdFZT3u (ORCPT ); Mon, 26 Jun 2017 15:29:50 -0400 From: Eddie James To: linux-kernel@vger.kernel.org Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, wsa@the-dreams.de, robh+dt@kernel.org, gregkh@linuxfoundation.org, jk@ozlabs.org, joel@jms.id.au, andrew@aj.id.au, eajames@linux.vnet.ibm.com, "Edward A. James" Subject: [PATCH 2/6] drivers/i2c: Add port structure to FSI algorithm Date: Mon, 26 Jun 2017 14:29:31 -0500 X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1498505375-1454-1-git-send-email-eajames@linux.vnet.ibm.com> References: <1498505375-1454-1-git-send-email-eajames@linux.vnet.ibm.com> X-TM-AS-GCONF: 00 x-cbid: 17062619-0008-0000-0000-00000819F74D X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00007281; HX=3.00000241; KW=3.00000007; PH=3.00000004; SC=3.00000214; SDB=6.00879079; UDB=6.00438095; IPR=6.00659234; BA=6.00005443; NDR=6.00000001; ZLA=6.00000005; ZF=6.00000009; ZB=6.00000000; ZP=6.00000000; ZH=6.00000000; ZU=6.00000002; MB=3.00015956; XFM=3.00000015; UTC=2017-06-26 19:29:46 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 17062619-0009-0000-0000-000042CD8AEE Message-Id: <1498505375-1454-3-git-send-email-eajames@linux.vnet.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-06-26_15:,, signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 suspectscore=1 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1703280000 definitions=main-1706260319 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4359 Lines: 183 From: "Edward A. James" Add and initialize I2C adapters for each port on the FSI-attached I2C master. Ports for each master are defined in the devicetree. Signed-off-by: Edward A. James --- drivers/i2c/busses/i2c-fsi.c | 113 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 112 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index f8ea94e..95fe25a 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -30,6 +30,7 @@ #define SETFIELD(m, v, val) \ (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_TO_LSH(m)) & (m))) +#define I2C_MASTER_NR_OFFSET 100 #define I2C_DEFAULT_CLK_DIV 6 /* i2c registers */ @@ -131,9 +132,21 @@ struct fsi_i2c_master { struct fsi_device *fsi; + int idx; u8 fifo_size; + struct list_head ports; + struct ida ida; }; +struct fsi_i2c_port { + struct list_head list; + struct i2c_adapter adapter; + struct fsi_i2c_master *master; + u16 port; +}; + +static DEFINE_IDA(fsi_i2c_ida); + static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg, u32 *data) { @@ -188,9 +201,44 @@ static int fsi_i2c_dev_init(struct fsi_i2c_master *i2c) return rc; } +static int fsi_i2c_set_port(struct fsi_i2c_port *port) +{ + int rc; + struct fsi_device *fsi = port->master->fsi; + u32 mode, dummy = 0; + u16 old_port; + + rc = fsi_i2c_read_reg(fsi, I2C_FSI_MODE, &mode); + if (rc) + return rc; + + old_port = GETFIELD(I2C_MODE_PORT, mode); + + if (old_port != port->port) { + mode = SETFIELD(I2C_MODE_PORT, mode, port->port); + rc = fsi_i2c_write_reg(fsi, I2C_FSI_MODE, &mode); + if (rc) + return rc; + + /* reset engine when port is changed */ + rc = fsi_i2c_write_reg(fsi, I2C_FSI_RESET_ERR, &dummy); + if (rc) + return rc; + } + + return rc; +} + static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) { + int rc; + struct fsi_i2c_port *port = adap->algo_data; + + rc = fsi_i2c_set_port(port); + if (rc) + return rc; + return -EOPNOTSUPP; } @@ -207,13 +255,59 @@ static u32 fsi_i2c_functionality(struct i2c_adapter *adap) static int fsi_i2c_probe(struct device *dev) { struct fsi_i2c_master *i2c; - int rc; + struct fsi_i2c_port *port; + struct device_node *np; + int rc, idx; + u32 port_no; i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL); if (!i2c) return -ENOMEM; i2c->fsi = to_fsi_dev(dev); + i2c->idx = ida_simple_get(&fsi_i2c_ida, 1, INT_MAX, GFP_KERNEL); + ida_init(&i2c->ida); + INIT_LIST_HEAD(&i2c->ports); + + if (dev->of_node) { + /* add adapter for each i2c port of the master */ + for_each_child_of_node(dev->of_node, np) { + rc = of_property_read_u32(np, "port", &port_no); + if (rc || port_no > 0xFFFF) + continue; + + /* make sure we don't overlap index with a buggy dts */ + idx = ida_simple_get(&i2c->ida, port_no, + port_no + 1, GFP_KERNEL); + if (idx < 0) + continue; + + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->master = i2c; + port->port = (u16)port_no; + + port->adapter.owner = THIS_MODULE; + port->adapter.dev.parent = dev; + port->adapter.algo = &fsi_i2c_algorithm; + port->adapter.algo_data = port; + /* number ports uniquely */ + port->adapter.nr = (i2c->idx * I2C_MASTER_NR_OFFSET) + + port_no; + + snprintf(port->adapter.name, + sizeof(port->adapter.name), + "i2cp_fsi-%u", port_no); + + rc = i2c_add_numbered_adapter(&port->adapter); + if (rc < 0) + return rc; + + list_add(&port->list, &i2c->ports); + } + } rc = fsi_i2c_dev_init(i2c); if (rc) @@ -224,6 +318,22 @@ static int fsi_i2c_probe(struct device *dev) return 0; } +static int fsi_i2c_remove(struct device *dev) +{ + struct fsi_i2c_master *i2c = dev_get_drvdata(dev); + struct fsi_i2c_port *port; + + list_for_each_entry(port, &i2c->ports, list) { + i2c_del_adapter(&port->adapter); + } + + ida_destroy(&i2c->ida); + + ida_simple_remove(&fsi_i2c_ida, i2c->idx); + + return 0; +} + static const struct fsi_device_id fsi_i2c_ids[] = { { FSI_ENGID_I2C, FSI_VERSION_ANY }, { 0 } @@ -235,6 +345,7 @@ static int fsi_i2c_probe(struct device *dev) .name = "i2cm-fsi", .bus = &fsi_bus_type, .probe = fsi_i2c_probe, + .remove = fsi_i2c_remove, }, }; -- 1.8.3.1