Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753533AbdF0S0i (ORCPT ); Tue, 27 Jun 2017 14:26:38 -0400 Received: from lpdvrndsmtp01.broadcom.com ([192.19.229.170]:43378 "EHLO rnd-relay.smtp.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753135AbdF0SYW (ORCPT ); Tue, 27 Jun 2017 14:24:22 -0400 From: Al Cooper To: linux-kernel@vger.kernel.org Cc: Al Cooper , Greg Kroah-Hartman , Rob Herring , Mark Rutland , Felipe Balbi , yuan linyu , Florian Fainelli , linux-usb@vger.kernel.org (open list:USB SUBSYSTEM), devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), bcm-kernel-feedback-list@broadcom.com Subject: [PATCH 2/8] usb: bdc: Add Device Tree binding document for Broadcom BDC driver Date: Tue, 27 Jun 2017 14:23:20 -0400 Message-Id: <1498587806-24781-3-git-send-email-alcooperx@gmail.com> X-Mailer: git-send-email 1.9.0.138.g2de3478 In-Reply-To: <1498587806-24781-1-git-send-email-alcooperx@gmail.com> References: <1498587806-24781-1-git-send-email-alcooperx@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1395 Lines: 45 Add Device Tree binding document for Broadcom USB Device Controller (BDC). Signed-off-by: Al Cooper --- .../devicetree/bindings/usb/brcm,bdc-udc.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt new file mode 100644 index 0000000..4eeaddb --- /dev/null +++ b/Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt @@ -0,0 +1,28 @@ +Broadcom USB Device Controller (BDC) +==================================== + +Required properties: + +- compatible: must be one of: + "brcm,bdc-udc-v0.16" + "brcm,bdc-udc" +- reg: the base register address and length +- interrupts: ther interrupt line for this controller + +Optional properties: + +On Broadcom STB platforms, these properties are required: + +- phys: phandle to the USB PHY blocks +- clocks: phandle to the functional clock of this block + +Example: + + udc@f0b02000 { + status = "disabled"; + compatible = "brcm,bdc-udc-v0.16"; + reg = <0xf0b02000 0xfc4>; + interrupts = <0x0 0x60 0x0>; + phys = <&usbphy_0 0x0>; + clocks = <&sw_usbd>; + }; -- 1.9.0.138.g2de3478