Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751596AbdF2A2w (ORCPT ); Wed, 28 Jun 2017 20:28:52 -0400 Received: from mx0a-001b2d01.pphosted.com ([148.163.156.1]:34637 "EHLO mx0a-001b2d01.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751818AbdF2A2n (ORCPT ); Wed, 28 Jun 2017 20:28:43 -0400 From: Christopher Bostic To: wim@iguana.be, linux@roeck-us.net, robh+dt@kernel.org, mark.rutland@arm.com, joel@jms.id.au, linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org Cc: Christopher Bostic , linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org Subject: [PATCH v3 2/2] drivers/watchdog: ASPEED reference dev tree properties for config Date: Wed, 28 Jun 2017 19:28:11 -0500 X-Mailer: git-send-email 2.10.1 (Apple Git-78) In-Reply-To: <20170629002811.87199-1-cbostic@linux.vnet.ibm.com> References: <20170629002811.87199-1-cbostic@linux.vnet.ibm.com> X-TM-AS-GCONF: 00 x-cbid: 17062900-0052-0000-0000-000002314AA7 X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00007292; HX=3.00000241; KW=3.00000007; PH=3.00000004; SC=3.00000214; SDB=6.00880138; UDB=6.00438730; IPR=6.00660292; BA=6.00005445; NDR=6.00000001; ZLA=6.00000005; ZF=6.00000009; ZB=6.00000000; ZP=6.00000000; ZH=6.00000000; ZU=6.00000002; MB=3.00015996; XFM=3.00000015; UTC=2017-06-29 00:28:39 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 17062900-0053-0000-0000-00005123902A Message-Id: <20170629002811.87199-3-cbostic@linux.vnet.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-06-28_15:,, signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 suspectscore=0 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1703280000 definitions=main-1706290007 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2270 Lines: 62 Reference the system device tree when configuring the watchdog engines. If optional property 'aspeed,no-sys-reset' is specified then override the default config and do not set sys reset mode. If optional property 'aspeed,no-soc-reset' is specified then override the default and do not set soc reset mode. Signed-off-by: Christopher Bostic --- v3 - Invert the logic for system reset dev tree property to preserve backwards compatibility. If not specified the default is to configure for system reset - Add check for 'aspeed,no-soc-reset' property and only if not present is SOC reset to be configured. This preserves backwards compatibility. v2 - Change of_get_property() to of_property_read_bool() - Remove redundant check for NULL struct device_node pointer - Optional property names now start with prefix 'aspeed,' --- drivers/watchdog/aspeed_wdt.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c index 1c65258..ace74f8 100644 --- a/drivers/watchdog/aspeed_wdt.c +++ b/drivers/watchdog/aspeed_wdt.c @@ -140,6 +140,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev) { struct aspeed_wdt *wdt; struct resource *res; + struct device_node *np; int ret; wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); @@ -166,12 +167,21 @@ static int aspeed_wdt_probe(struct platform_device *pdev) /* * Control reset on a per-device basis to ensure the - * host is not affected by a BMC reboot, so only reset - * the SOC and not the full chip + * host is not affected by a BMC reboot */ - wdt->ctrl = WDT_CTRL_RESET_MODE_SOC | - WDT_CTRL_1MHZ_CLK | - WDT_CTRL_RESET_SYSTEM; + wdt->ctrl = WDT_CTRL_1MHZ_CLK; + + np = pdev->dev.of_node; + if (!(of_property_read_bool(np, "aspeed,no-soc-reset"))) + wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC; + + if (!(of_property_read_bool(np, "aspeed,no-sys-reset"))) + wdt->ctrl |= WDT_CTRL_RESET_SYSTEM; + + if (of_property_read_bool(np, "aspeed,external-signal")) + wdt->ctrl |= WDT_CTRL_WDT_EXT; + + writel(wdt->ctrl, wdt->base + WDT_CTRL); if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) { aspeed_wdt_start(&wdt->wdd); -- 1.8.2.2