Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752310AbdF3LVv (ORCPT ); Fri, 30 Jun 2017 07:21:51 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:37428 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751584AbdF3LVX (ORCPT ); Fri, 30 Jun 2017 07:21:23 -0400 From: Enric Balletbo i Serra To: Thierry Reding , Lee Jones , Daniel Thompson , Jingoo Han , Bartlomiej Zolnierkiewicz , Rob Herring , Pavel Machek , Richard Purdie , Jacek Anaszewski , Heiko Stuebner Cc: linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, groeck@chromium.org, linux-rockchip@lists.infradead.org Subject: [PATCH v2 3/4] ARM: dts: rockchip: set pre/post pwm-delay-us property. Date: Fri, 30 Jun 2017 13:21:08 +0200 Message-Id: <20170630112109.13785-3-enric.balletbo@collabora.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170630112109.13785-1-enric.balletbo@collabora.com> References: <20170630112109.13785-1-enric.balletbo@collabora.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1047 Lines: 29 For veyron the binding should provide both pwm timings, the delay between you enable the PWM and set the enable signal, and the delay between you disable the PWM signal and clear the enable signal. Update the binding accordingly, in this case the panels connected to the veyron boards have a symetric power sequence, hence the same value is used. Signed-off-by: Enric Balletbo i Serra --- Changes since v1: - Add this new patch to fix current binding on veyron. arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index d752a31..c0e8ce2 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -96,7 +96,7 @@ pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 0>; - pwm-delay-us = <10000>; + pwm-delay-us = <10000 10000>; }; gpio-charger { -- 2.9.3