Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754402AbdFSSkd (ORCPT + 2 others); Mon, 19 Jun 2017 14:40:33 -0400 Received: from wtarreau.pck.nerim.net ([62.212.114.60]:52788 "EHLO 1wt.eu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754147AbdFSSka (ORCPT ); Mon, 19 Jun 2017 14:40:30 -0400 From: Willy Tarreau To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, linux@roeck-us.net Cc: Akinobu Mita , Dmitry Torokhov , Oliver Neukum , Jiri Slaby , Willy Tarreau Subject: [PATCH 3.10 095/268] Input: mpr121 - handle multiple bits change of status register Date: Mon, 19 Jun 2017 20:29:54 +0200 Message-Id: <1497897167-14556-96-git-send-email-w@1wt.eu> X-Mailer: git-send-email 2.8.0.rc2.1.gbe9624a In-Reply-To: <1497897167-14556-1-git-send-email-w@1wt.eu> References: <1497897167-14556-1-git-send-email-w@1wt.eu> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Return-Path: From: Akinobu Mita commit 08fea55e37f58371bffc5336a59e55d1f155955a upstream. This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by: Akinobu Mita Signed-off-by: Dmitry Torokhov Cc: Oliver Neukum Signed-off-by: Jiri Slaby Signed-off-by: Willy Tarreau --- drivers/input/keyboard/mpr121_touchkey.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c index f7f3e9a..d781d53 100644 --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -88,7 +88,8 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) struct mpr121_touchkey *mpr121 = dev_id; struct i2c_client *client = mpr121->client; struct input_dev *input = mpr121->input_dev; - unsigned int key_num, key_val, pressed; + unsigned long bit_changed; + unsigned int key_num; int reg; reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR); @@ -106,18 +107,22 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id) reg &= TOUCH_STATUS_MASK; /* use old press bit to figure out which bit changed */ - key_num = ffs(reg ^ mpr121->statusbits) - 1; - pressed = reg & (1 << key_num); + bit_changed = reg ^ mpr121->statusbits; mpr121->statusbits = reg; + for_each_set_bit(key_num, &bit_changed, mpr121->keycount) { + unsigned int key_val, pressed; - key_val = mpr121->keycodes[key_num]; + pressed = reg & BIT(key_num); + key_val = mpr121->keycodes[key_num]; - input_event(input, EV_MSC, MSC_SCAN, key_num); - input_report_key(input, key_val, pressed); - input_sync(input); + input_event(input, EV_MSC, MSC_SCAN, key_num); + input_report_key(input, key_val, pressed); + + dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, + pressed ? "pressed" : "released"); - dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val, - pressed ? "pressed" : "released"); + } + input_sync(input); out: return IRQ_HANDLED; -- 2.8.0.rc2.1.gbe9624a