Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932375AbdGCNlP (ORCPT ); Mon, 3 Jul 2017 09:41:15 -0400 Received: from mail.linuxfoundation.org ([140.211.169.12]:35574 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932356AbdGCNlM (ORCPT ); Mon, 3 Jul 2017 09:41:12 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Eli Cohen , Saeed Mahameed Subject: [PATCH 4.9 019/172] net/mlx5: Wait for FW readiness before initializing command interface Date: Mon, 3 Jul 2017 15:33:19 +0200 Message-Id: <20170703133415.146128371@linuxfoundation.org> X-Mailer: git-send-email 2.13.2 In-Reply-To: <20170703133414.260777365@linuxfoundation.org> References: <20170703133414.260777365@linuxfoundation.org> User-Agent: quilt/0.65 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1856 Lines: 56 4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Eli Cohen [ Upstream commit 6c780a0267b8a1075f40b39851132eeaefefcff5 ] Before attempting to initialize the command interface we must wait till the fw_initializing bit is clear. If we fail to meet this condition the hardware will drop our configuration, specifically the descriptors page address. This scenario can happen when the firmware is still executing an FLR flow and did not finish yet so the driver needs to wait for that to finish. Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -155,8 +155,9 @@ static struct mlx5_profile profile[] = { }, }; -#define FW_INIT_TIMEOUT_MILI 2000 -#define FW_INIT_WAIT_MS 2 +#define FW_INIT_TIMEOUT_MILI 2000 +#define FW_INIT_WAIT_MS 2 +#define FW_PRE_INIT_TIMEOUT_MILI 10000 static int wait_fw_init(struct mlx5_core_dev *dev, u32 max_wait_mili) { @@ -956,6 +957,15 @@ static int mlx5_load_one(struct mlx5_cor */ dev->state = MLX5_DEVICE_STATE_UP; + /* wait for firmware to accept initialization segments configurations + */ + err = wait_fw_init(dev, FW_PRE_INIT_TIMEOUT_MILI); + if (err) { + dev_err(&dev->pdev->dev, "Firmware over %d MS in pre-initializing state, aborting\n", + FW_PRE_INIT_TIMEOUT_MILI); + goto out; + } + err = mlx5_cmd_init(dev); if (err) { dev_err(&pdev->dev, "Failed initializing command interface, aborting\n");