Subject: Re: [PATCH v5] mmc: dw_mmc-k3: add sd support for hi3660
To: ulf.hansson@linaro.org, adrian.hunter@intel.com,
        shawn.lin@rock-chips.com, wsa+renesas@sang-engineering.com,
        hkallweit1@gmail.com, linux-mmc@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc: guodong.xu@linaro.org
From: Jaehoon Chung <jh80.chung@samsung.com>
Message-id: <d7f48bc0-7ba9-1ada-2c2c-99d038cd8fa5@samsung.com>
Date: Thu, 06 Jul 2017 14:13:20 +0900
User-Agent: Mozilla/5.0 (X11; Linux i686; rv:45.0) Gecko/20100101
        Thunderbird/45.3.0
MIME-version: 1.0
In-reply-to: <20170703010610.61097-1-liwei213@huawei.com>
Content-type: text/plain; charset="windows-1252"
Content-transfer-encoding: 7bit
CMS-TYPE: 101P
DLP-Filter: Pass
References: <CGME20170703010627epcas4p112c8b4ab09679a452d72cb5768f7f733@epcas4p1.samsung.com>
        <20170703010610.61097-1-liwei213@huawei.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 11451
Lines: 414

Hi,

To Guodong, if you can forward this to Li Wei, plz do it. Sorry.

On 07/03/2017 10:06 AM, liwei wrote:
> 
> Add sd card support for hi3660 soc

Need the patch for adding "hi3660-dw-mshc" compatible Documentation/devicetree/bindings/k3-dw-mshc.txt

And added the minor comments.

> 
> Major changes in v3:
>  - solve review comments from Heiner Kallweit.
>    *use the GENMASK and FIELD_PREP macros replace the bit shift operation.
>    *use usleep_range() replace udelay() and mdelay().
> 
> Major changes in v4:
>  - solve review comments from Jaehoon Chung.
>    *move common register for dwmmc controller to dwmmc header file.
>    *modify definitions type of some register variables.
>    *get rid of the magic numbers.
> 
> Major changes in v5:
>  - further improve coding style.
> ---
>  drivers/mmc/host/dw_mmc-k3.c | 315 +++++++++++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/dw_mmc.h    |   2 +
>  2 files changed, 317 insertions(+)
> 
> diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
> index e38fb0020bb1..a28eb8c7da82 100644
> --- a/drivers/mmc/host/dw_mmc-k3.c
> +++ b/drivers/mmc/host/dw_mmc-k3.c
> @@ -8,6 +8,8 @@
>   * (at your option) any later version.
>   */
>  
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/mmc/host.h>
> @@ -28,7 +30,38 @@
>  #define AO_SCTRL_SEL18		BIT(10)
>  #define AO_SCTRL_CTRL3		0x40C
>  
> +#define DWMMC_SDIO_ID 2
> +
> +#define SOC_SCTRL_SCPERCTRL5    (0x314)
> +#define SDCARD_IO_SEL18         BIT(2)
> +
> +#define SDCARD_RD_THRESHOLD  (512)
> +
> +#define GENCLK_DIV (7)
> +
> +#define GPIO_CLK_ENABLE                   BIT(16)
> +#define GPIO_CLK_DIV_MASK                 GENMASK(11, 8)
> +#define GPIO_USE_SAMPLE_DLY_MASK          GENMASK(13, 13)
> +#define UHS_REG_EXT_SAMPLE_PHASE_MASK     GENMASK(20, 16)
> +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK  GENMASK(25, 21)
> +#define UHS_REG_EXT_SAMPLE_DLY_MASK       GENMASK(30, 26)
> +
> +#define TIMING_MODE     3
> +#define TIMING_CFG_NUM 10
> +
> +#define PULL_DOWN BIT(1)
> +#define PULL_UP   BIT(0)
> +
> +#define NUM_PHASES (40)
> +
> +#define ENABLE_SHIFT_MIN_SMPL (4)
> +#define ENABLE_SHIFT_MAX_SMPL (12)
> +#define USE_DLY_MIN_SMPL (11)
> +#define USE_DLY_MAX_SMPL (14)
> +
>  struct k3_priv {
> +	int ctrl_id;
> +	u32 cur_speed;
>  	struct regmap	*reg;
>  };
>  
> @@ -38,6 +71,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
>  	0
>  };
>  
> +struct hs_timing {
> +	u32 drv_phase;
> +	u32 smpl_dly;
> +	u32 smpl_phase_max;
> +	u32 smpl_phase_min;
> +};
> +
> +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
> +	{ /* reserved */ },
> +	{ /* SD */
> +		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
> +		{6, 0,  4,  4,},  /* 1: MMC_HS */
> +		{6, 0,  3,  3,},  /* 2: SD_HS */
> +		{6, 0, 15, 15,},  /* 3: SDR12 */
> +		{6, 0,  2,  2,},  /* 4: SDR25 */
> +		{4, 0, 11,  0,},  /* 5: SDR50 */
> +		{6, 4, 15,  0,},  /* 6: SDR104 */
> +		{0},              /* 7: DDR50 */
> +		{0},              /* 8: DDR52 */
> +		{0},              /* 9: HS200 */
> +	},
> +	{ /* SDIO */
> +		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
> +		{0},              /* 1: MMC_HS */
> +		{6, 0, 15, 15,},  /* 2: SD_HS */
> +		{6, 0, 15, 15,},  /* 3: SDR12 */
> +		{6, 0,  0,  0,},  /* 4: SDR25 */
> +		{4, 0, 12,  0,},  /* 5: SDR50 */
> +		{5, 4, 15,  0,},  /* 6: SDR104 */
> +		{0},              /* 7: DDR50 */
> +		{0},              /* 8: DDR52 */
> +		{0},              /* 9: HS200 */
> +	}
> +};
> +
>  static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
>  {
>  	int ret;
> @@ -66,6 +134,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
>  	if (IS_ERR(priv->reg))
>  		priv->reg = NULL;
>  
> +	priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
> +	if (priv->ctrl_id < 0)
> +		priv->ctrl_id = 0;
> +
>  	host->priv = priv;
>  	return 0;
>  }
> @@ -144,7 +216,245 @@ static const struct dw_mci_drv_data hi6220_data = {
>  	.execute_tuning		= dw_mci_hi6220_execute_tuning,
>  };
>  
> +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
> +				     int smpl_phase)
> +{
> +	u32 drv_phase;
> +	u32 smpl_dly;
> +	u32 use_smpl_dly = 0;
> +	u32 enable_shift = 0;
> +	u32 reg_value;
> +	int ctrl_id;
> +	struct k3_priv *priv;
> +
> +	priv = host->priv;
> +	ctrl_id = priv->ctrl_id;
> +
> +	drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
> +	smpl_dly   = hs_timing_cfg[ctrl_id][timing].smpl_dly;
> +	if (smpl_phase == -1)
> +		smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
> +			     hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
> +
> +	switch (timing) {
> +	case MMC_TIMING_UHS_SDR104:
> +		if (smpl_phase >= USE_DLY_MIN_SMPL &&
> +				smpl_phase <= USE_DLY_MAX_SMPL)
> +			use_smpl_dly = 1;
> +			/* fallthrough */
> +	case MMC_TIMING_UHS_SDR50:
> +		if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
> +				smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
> +			enable_shift = 1;
> +		break;
> +	}
> +
> +	mci_writel(host, GPIO, 0x0);
> +	usleep_range(5, 10);
> +
> +	reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
> +		    FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
> +		    FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
> +	mci_writel(host, UHS_REG_EXT, reg_value);
> +
> +	mci_writel(host, ENABLE_SHIFT, enable_shift);
> +
> +	reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
> +			     FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
> +	mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
> +
> +	/* We should delay 1ms wait for timing setting finished. */
> +	usleep_range(1000, 2000);
> +}
> +
> +static int dw_mci_hi3660_init(struct dw_mci *host)
> +{
> +	mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
> +		    SDMMC_CARD_RD_THR_EN));
> +
> +	dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
> +	host->bus_hz /= (GENCLK_DIV + 1);
> +
> +	return 0;
> +}
> +
> +static int dw_mci_set_sel18(struct dw_mci *host, bool set)
> +{
> +	int ret;
> +	unsigned int val;
> +	struct k3_priv *priv;
> +
> +	priv = host->priv;
> +
> +	val = set ? SDCARD_IO_SEL18 : 0;
> +	ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
> +				 SDCARD_IO_SEL18, val);
> +	if (ret) {
> +		dev_err(host->dev, "sel18 %u error\n", val);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)

static?

> +{
> +	int ret;
> +	unsigned long wanted;
> +	unsigned long actual;
> +	struct k3_priv *priv = host->priv;
> +
> +	if (!ios->clock || ios->clock == priv->cur_speed)
> +		return;
> +
> +	wanted = ios->clock * (GENCLK_DIV + 1);
> +	ret = clk_set_rate(host->ciu_clk, wanted);
> +	if (ret) {
> +		dev_err(host->dev, "failed to set rate %luHz\n", wanted);
> +		return;
> +	}
> +	actual = clk_get_rate(host->ciu_clk);
> +
> +	dw_mci_hs_set_timing(host, ios->timing, -1);
> +	host->bus_hz = actual / (GENCLK_DIV + 1);
> +	host->current_speed = 0;
> +	priv->cur_speed = host->bus_hz;
> +}
> +
> +static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
> +{
> +	int i;
> +	int interval;
> +	unsigned int v;
> +	unsigned int len;
> +	unsigned int range_start = 0;
> +	unsigned int range_length = 0;
> +	unsigned int middle_range = 0;
> +
> +	if (!sample_flag)
> +		return -EIO;
> +
> +	if (~sample_flag == 0)
> +		return 0;
> +
> +	i = ffs(sample_flag) - 1;
> +
> +	/*A clock cycle is divided into 32 phases,
> +	 *each of which is represented by a bit,
> +	 *finding the optimal phase.
> +	 */

Fix the comment style.

> +	while (i < 32) {
> +		v = ror32(sample_flag, i);
> +		len = ffs(~v) - 1;
> +
> +		if (len > range_length) {
> +			range_length = len;
> +			range_start = i;
> +		}
> +
> +		interval = ffs(v >> len) - 1;
> +		if (interval < 0)
> +			break;
> +
> +		i += len + interval;
> +	}
> +
> +	middle_range = range_start + range_length / 2;
> +	if (middle_range >= 32)
> +		middle_range %= 32;
> +
> +	return middle_range;
> +}
> +
> +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
> +{
> +	int i = 0;
> +	struct dw_mci *host = slot->host;
> +	struct mmc_host *mmc = slot->mmc;
> +	int smpl_phase = 0;
> +	u32 tuning_sample_flag = 0;
> +	int best_clksmpl = 0;
> +
> +	for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
> +		smpl_phase %= 32;
> +
> +		mci_writel(host, TMOUT, ~0);
> +		dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase);
> +
> +		if (!mmc_send_tuning(mmc, opcode, NULL))
> +			tuning_sample_flag |= (1 << smpl_phase);
> +		else
> +			tuning_sample_flag &= ~(1 << smpl_phase);
> +	}
> +
> +	best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
> +	if (best_clksmpl < 0) {
> +		dev_err(host->dev, "All phases bad!\n");
> +		return -EIO;
> +	}
> +
> +	dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
> +
> +	dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
> +		 best_clksmpl, tuning_sample_flag);
> +	return 0;
> +}
> +
> +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
> +					struct mmc_ios *ios)
> +{
> +	int ret;
> +	int min_uv = 0;
> +	int max_uv = 0;
> +	struct dw_mci_slot *slot = mmc_priv(mmc);
> +	struct k3_priv *priv;
> +	struct dw_mci *host;
> +
> +	host = slot->host;
> +	priv = host->priv;
> +
> +	if (!priv || !priv->reg)
> +		return 0;
> +
> +	if (priv->ctrl_id == DWMMC_SDIO_ID)
> +		return 0;
> +
> +	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> +		ret = dw_mci_set_sel18(host, 0);
> +		if (ret)
> +			return ret;
> +		min_uv = 2950000;
> +		max_uv = 2950000;
> +	} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> +		ret = dw_mci_set_sel18(host, 1);
> +		if (ret)
> +			return ret;
> +		min_uv = 1800000;
> +		max_uv = 1800000;
> +	}
> +
> +	if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
> +		return 0;
> +
> +	ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
> +	if (ret) {
> +		dev_err(host->dev, "Regulator set error %d: %d - %d\n",
> +			ret, min_uv, max_uv);
> +		return ret;
> +	}
> +	return 0;
> +}
> +
> +static const struct dw_mci_drv_data hi3660_data = {
> +	.init = dw_mci_hi3660_init,
> +	.set_ios = dw_mci_hi3660_set_ios,
> +	.parse_dt = dw_mci_hi6220_parse_dt,
> +	.execute_tuning = dw_mci_hi3660_execute_tuning,
> +	.switch_voltage  = dw_mci_hi3660_switch_voltage,
> +};
> +
>  static const struct of_device_id dw_mci_k3_match[] = {
> +	{ .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
>  	{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
>  	{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
>  	{},
> @@ -155,6 +465,11 @@ static int dw_mci_k3_probe(struct platform_device *pdev)
>  {
>  	const struct dw_mci_drv_data *drv_data;
>  	const struct of_device_id *match;
> +	struct reset_control	*rst;
> +
> +	rst = devm_reset_control_get(&pdev->dev, NULL);
> +	if (!IS_ERR(rst))
> +		reset_control_reset(rst);
>  
>  	match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
>  	drv_data = match->data;
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index ce347361f3dc..7cdcafda8eec 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -319,6 +319,8 @@ struct dw_mci_board {
>  #define SDMMC_DSCADDR		0x094
>  #define SDMMC_BUFADDR		0x098
>  #define SDMMC_CDTHRCTL		0x100
> +#define SDMMC_UHS_REG_EXT	0x108
> +#define SDMMC_ENABLE_SHIFT	0x110
>  #define SDMMC_DATA(x)		(x)
>  /*
>  * Registers to support idmac 64-bit address mode
>