Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264889AbTFQStK (ORCPT ); Tue, 17 Jun 2003 14:49:10 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264887AbTFQStK (ORCPT ); Tue, 17 Jun 2003 14:49:10 -0400 Received: from fmr02.intel.com ([192.55.52.25]:53952 "EHLO caduceus.fm.intel.com") by vger.kernel.org with ESMTP id S264889AbTFQSrj convert rfc822-to-8bit (ORCPT ); Tue, 17 Jun 2003 14:47:39 -0400 content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT X-MimeOLE: Produced By Microsoft Exchange V6.0.6375.0 Subject: RE: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading Date: Tue, 17 Jun 2003 12:01:07 -0700 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading Thread-Index: AcM09eWy0CFkDCXuTS2Tpnacj1SwdwADDpRg From: "Pallipadi, Venkatesh" To: "Bruno Cornec" , Cc: X-OriginalArrivalTime: 17 Jun 2003 19:01:11.0461 (UTC) FILETIME=[D1534D50:01C33502] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 49041 Lines: 1219 Hi, Can you try latest 2.4-ac kernel. That has a patch to enable systems with more than 8 logical cpus. With that kernel, you should be able to boot with HT and without "noapic". Thanks, -Venki > -----Original Message----- > From: Bruno Cornec [mailto:Bruno.Cornec@hp.com] > Sent: Tuesday, June 17, 2003 10:25 AM > To: linux-kernel@vger.kernel.org > Cc: sophie.pasquier@hp.com; bruno.cornec@hp.com > Subject: PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading > > > Hello, > > First this is my first mail on that mailing-list so even if I > try reading > all the guidelines before posting, I may have missed some, as I'm not > reading it regularly but only through kernel-traffic. > [So please keep the Cc: if you answer to that mail] > > PROBLEM: DL760 G2 issue on 2.4.21 with Hyper-Threading (HT) > > When activating HT on the machine in the BIOS, the system > boots correctly > as it seems (detecting the 16 CPUs it should detect) but then > it hangs > during the remaining phases of the boot (before launching the > X session > generally). Whatever the runlevel (S, 2, 3, 4), results is the same. > The base distribution is SLES 8. So I tried first their kernel > (k_smp-2.4.19-113), then their updated kernel (k_smp-2.4.19-257), then > a RedHat kernel (2.4.20-18.9bigmem), then a std 2.4.21 > kernel, with always > the same result, soon or less a hang. No other messages at > the console. > > The same machines with the same kernels without HT enabled in > BIOS works > like a charm. > > Tests were made initialy with 24 GB of RAM, then with 4 GB of > RAM, just > to be in a safe conf. > > Here are some more precise info: > > -------------------------------------------------------------------- > The latest BIOS has been put on the system (P44 - 2003-02-18) > -------------------------------------------------------------------- > cat /proc/cmdline : > root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off (8 CPUs) > root=/dev/cciss/c0d0p1 ide=nodma apm=off acpi=off noapic (16 CPUs) > > The noapic option seems mandatory as the system does a kernel panic > without it in HT mode due to errors in IO-APIC. > > -------------------------------------------------------------------- > cat /proc/cpuinfo (8 CPUs) : > > processor : 0 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3984.58 > > processor : 1 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3997.69 > > processor : 2 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3997.69 > > processor : 3 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3997.69 > > processor : 4 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3997.69 > > processor : 5 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3997.69 > > processor : 6 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3997.69 > > processor : 7 > vendor_id : GenuineIntel > cpu family : 15 > model : 2 > model name : Intel(R) XEON(TM) MP CPU 2.00GHz > stepping : 2 > cpu MHz : 1999.320 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse > sse2 ss ht tm > bogomips : 3997.69 > > -------------------------------------------------------------------- > boot.log (8 CPU - without noapic ) > > Inspecting /boot/System.map > Loaded 18066 symbols from /boot/System.map. > Symbols match kernel version 2.4.21. > No module symbols loaded. > klogd 1.4.1, log source = ksyslog started. > <4>Linux version 2.4.21 (root@linux) (gcc version 3.2) #3 SMP > Tue Jun 17 17:32:56 CEST 2003 > <6>BIOS-provided physical RAM map: > <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) > <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) > <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > <4> BIOS-e820: 0000000100000000 - 000000010ffff000 (usable) > <5>3455MB HIGHMEM available. > <5>896MB LOWMEM available. > <4>found SMP MP-table at 000f4fd0 > <4>hm, page 000f4000 reserved twice. > <4>hm, page 000f5000 reserved twice. > <4>hm, page 000f7000 reserved twice. > <4>hm, page 000f8000 reserved twice. > <4>On node 0 totalpages: 1114111 > <4>zone(0): 4096 pages. > <4>zone(1): 225280 pages. > <4>zone(2): 884735 pages. > <6>ACPI: Searched entire block, no RSDP was found. > <6>ACPI: RSDP located at physical address c00f4f70 > <6>RSD PTR v0 [HP ] > <4>__va_range(0xefff0000, 0x68): idx=8 mapped at ffff6000 > <6>ACPI table found: RSDT v1 [HP P44 0.1] > <4>__va_range(0xefff0040, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff0040, 0x74): idx=8 mapped at ffff6000 > <6>ACPI table found: FACP v1 [HP P44 0.1] > <4>__va_range(0xefff0100, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 > <6>ACPI table found: APIC v1 [HP P44 0.1] > <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 > <6>LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) > <6>CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0002] id[0x2] enabled[1]) > <6>CPU 1 (0x0200) enabledProcessor #2 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0003] id[0x4] enabled[1]) > <6>CPU 2 (0x0400) enabledProcessor #4 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0004] id[0x6] enabled[1]) > <6>CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0005] id[0x8] enabled[1]) > <6>CPU 4 (0x0800) enabledProcessor #8 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0006] id[0xa] enabled[1]) > <6>CPU 5 (0x0a00) enabledProcessor #10 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0007] id[0xc] enabled[1]) > <6>CPU 6 (0x0c00) enabledProcessor #12 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0008] id[0xe] enabled[1]) > <6>CPU 7 (0x0e00) enabledProcessor #14 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0009] id[0x1] enabled[0]) > <6>CPU 8 (0x0100) disabled > <6>LAPIC (acpi_id[0x000a] id[0x3] enabled[0]) > <6>CPU 9 (0x0300) disabled > <6>LAPIC (acpi_id[0x000b] id[0x5] enabled[0]) > <6>CPU 10 (0x0500) disabled > <6>LAPIC (acpi_id[0x000c] id[0x7] enabled[0]) > <6>CPU 11 (0x0700) disabled > <6>LAPIC (acpi_id[0x000d] id[0x9] enabled[0]) > <6>CPU 12 (0x0900) disabled > <6>LAPIC (acpi_id[0x000e] id[0xb] enabled[0]) > <6>CPU 13 (0x0b00) disabled > <6>LAPIC (acpi_id[0x000f] id[0xd] enabled[0]) > <6>CPU 14 (0x0d00) disabled > <6>LAPIC (acpi_id[0x0010] id[0xf] enabled[0]) > <6>CPU 15 (0x0f00) disabled > <6>IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0]) > <6>IOAPIC (id[0x9] address[0xfec01000] global_irq_base[0x10]) > <6>IOAPIC (id[0xa] address[0xfec02000] global_irq_base[0x20]) > <6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] > trigger[0x1]) > <6>LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1]) > <6>16 CPUs total > <6>Local APIC address fee00000 > <4>__va_range(0xefff01e0, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff01e0, 0x58): idx=8 mapped at ffff6000 > <6>ACPI table found: SRAT v1 [HP P44 0.3] > <4>__va_range(0xefff0238, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff0238, 0x50): idx=8 mapped at ffff6000 > <6>ACPI table found: SPCR v1 [HP P44 0.1] > <4>__va_range(0xefff8000, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff8000, 0x4fae): idx=8 mapped at ffff6000 > <6>ACPI table found: SSDT v1 [HP P44 0.2] > <4>Enabling the CPU's according to the ACPI table > <4>Intel MultiProcessor Specification v1.4 > <4> Virtual Wire compatibility mode. > <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 > <4>I/O APIC #8 Version 17 at 0xFEC00000. > <4>I/O APIC #9 Version 17 at 0xFEC01000. > <4>I/O APIC #10 Version 17 at 0xFEC02000. > <4>Enabling APIC mode: Flat. Using 3 I/O APICs > <4>Processors: 8 > <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma > apm=off acpi=off > <6>ide_setup: ide=nodma : Prevented DMA > <6>Initializing CPU#0 > <4>Detected 1999.320 MHz processor. > <4>Console: colour VGA+ 80x25 > <4>Calibrating delay loop... 3984.58 BogoMIPS > <6>Memory: 4138352k/4456444k available (1594k kernel code, > 55496k reserved, 397k data, 500k init, 3276732k highmem) > <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) > <4>Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes) > <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check architecture supported. > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <6>Enabling fast FPU save and restore... done. > <6>Enabling unmasked SIMD FPU exception support... done. > <6>Checking 'hlt' instruction... OK. > <4>POSIX conformance testing by UNIFIX > <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > <4>mtrr: detected mtrr type: Intel > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>per-CPU timeslice cutoff: 1462.74 usecs. > <4>enabled ExtINT on CPU#0 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Booting processor 1/2 eip 2000 > <6>Initializing CPU#1 > <4>masked ExtINT on CPU#1 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#1. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 2/4 eip 2000 > <6>Initializing CPU#2 > <4>masked ExtINT on CPU#2 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#2. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 3/6 eip 2000 > <6>Initializing CPU#3 > <4>masked ExtINT on CPU#3 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#3. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 4/8 eip 2000 > <6>Initializing CPU#4 > <4>masked ExtINT on CPU#4 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#4. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 5/10 eip 2000 > <6>Initializing CPU#5 > <4>masked ExtINT on CPU#5 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#5. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 6/12 eip 2000 > <6>Initializing CPU#6 > <4>masked ExtINT on CPU#6 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#6. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 7/14 eip 2000 > <6>Initializing CPU#7 > <4>masked ExtINT on CPU#7 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#7. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <6>Total of 8 processors activated (31968.46 BogoMIPS). > <4>ENABLING IO-APIC IRQs > <3>BIOS bug, IO-APIC#0 ID 8 is already used!... > <3>... fixing up to 1. (tell your hw vendor) > <6>...changing IO-APIC physical APIC ID to 1 ... ok. > <4>Setting 9 in the phys_id_present_map > <6>...changing IO-APIC physical APIC ID to 9 ... ok. > <3>BIOS bug, IO-APIC#2 ID 10 is already used!... > <3>... fixing up to 3. (tell your hw vendor) > <6>...changing IO-APIC physical APIC ID to 3 ... ok. > <7>init IO_APIC IRQs > <7> IO-APIC (apicid-pin) 1-0, 1-3, 1-5, 1-7, 1-11, 3-1, 3-2, > 3-4 not connected. > <6>..TIMER: vector=0x31 pin1=2 pin2=0 > <7>number of MP IRQ sources: 68. > <7>number of IO-APIC #1 registers: 16. > <7>number of IO-APIC #9 registers: 16. > <7>number of IO-APIC #3 registers: 16. > <6>testing the IO APIC....................... > <4> > <7>IO APIC #1...... > <7>.... register #00: 01000000 > <7>....... : physical APIC id: 01 > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 01000000 > <7>....... : arbitration: 01 > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 000 00 1 0 0 0 0 0 0 00 > <7> 01 0FF 0F 0 0 0 0 0 1 1 39 > <7> 02 0FF 0F 0 0 0 0 0 1 1 31 > <7> 03 000 00 1 0 0 0 0 0 0 00 > <7> 04 0FF 0F 0 0 0 0 0 1 1 41 > <7> 05 000 00 1 0 0 0 0 0 0 00 > <7> 06 0FF 0F 0 0 0 0 0 1 1 49 > <7> 07 000 00 1 0 0 0 0 0 0 00 > <7> 08 0FF 0F 0 0 0 0 0 1 1 51 > <7> 09 0FF 0F 1 1 0 1 0 1 1 59 > <7> 0a 0FF 0F 1 1 0 1 0 1 1 61 > <7> 0b 000 00 1 0 0 0 0 0 0 00 > <7> 0c 0FF 0F 0 0 0 0 0 1 1 69 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 71 > <7> 0e 0FF 0F 0 0 0 0 0 1 1 79 > <7> 0f 0FF 0F 0 0 0 0 0 1 1 81 > <4> > <7>IO APIC #9...... > <7>.... register #00: 09000000 > <7>....... : physical APIC id: 09 > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 09000000 > <7>....... : arbitration: 09 > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 0FF 0F 1 1 0 1 0 1 1 89 > <7> 01 0FF 0F 1 1 0 1 0 1 1 91 > <7> 02 0FF 0F 1 1 0 1 0 1 1 99 > <7> 03 0FF 0F 1 1 0 1 0 1 1 A1 > <7> 04 0FF 0F 1 1 0 1 0 1 1 A9 > <7> 05 0FF 0F 1 1 0 1 0 1 1 B1 > <7> 06 0FF 0F 1 1 0 1 0 1 1 B9 > <7> 07 0FF 0F 1 1 0 1 0 1 1 C1 > <7> 08 0FF 0F 1 1 0 1 0 1 1 C9 > <7> 09 0FF 0F 1 1 0 1 0 1 1 D1 > <7> 0a 0FF 0F 1 1 0 1 0 1 1 D9 > <7> 0b 0FF 0F 1 1 0 1 0 1 1 E1 > <7> 0c 0FF 0F 1 1 0 1 0 1 1 E9 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 32 > <7> 0e 0FF 0F 1 1 0 1 0 1 1 3A > <7> 0f 0FF 0F 1 1 0 1 0 1 1 42 > <4> > <7>IO APIC #3...... > <7>.... register #00: 03000000 > <7>....... : physical APIC id: 03 > <7>....... : Delivery Type: 0 > <7>....... : LTS : 0 > <7>.... register #01: 000F0011 > <7>....... : max redirection entries: 000F > <7>....... : PRQ implemented: 0 > <7>....... : IO APIC version: 0011 > <7>.... register #02: 03000000 > <7>....... : arbitration: 03 > <7>.... IRQ redirection table: > <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > <7> 00 0FF 0F 1 1 0 1 0 1 1 4A > <7> 01 000 00 1 0 0 0 0 0 0 00 > <7> 02 000 00 1 0 0 0 0 0 0 00 > <7> 03 0FF 0F 1 1 0 1 0 1 1 52 > <7> 04 000 00 1 0 0 0 0 0 0 00 > <7> 05 0FF 0F 1 1 0 1 0 1 1 5A > <7> 06 0FF 0F 1 1 0 1 0 1 1 62 > <7> 07 0FF 0F 1 1 0 1 0 1 1 6A > <7> 08 0FF 0F 1 1 0 1 0 1 1 72 > <7> 09 0FF 0F 1 1 0 1 0 1 1 7A > <7> 0a 0FF 0F 1 1 0 1 0 1 1 82 > <7> 0b 0FF 0F 1 1 0 1 0 1 1 8A > <7> 0c 0FF 0F 1 1 0 1 0 1 1 92 > <7> 0d 0FF 0F 1 1 0 1 0 1 1 9A > <7> 0e 0FF 0F 1 1 0 1 0 1 1 A2 > <7> 0f 0FF 0F 1 1 0 1 0 1 1 AA > <7>IRQ to pin mappings: > <7>IRQ0 -> 0:2 > <7>IRQ1 -> 0:1 > <7>IRQ4 -> 0:4 > <7>IRQ6 -> 0:6 > <7>IRQ8 -> 0:8 > <7>IRQ9 -> 0:9 > <7>IRQ10 -> 0:10 > <7>IRQ12 -> 0:12 > <7>IRQ13 -> 0:13 > <7>IRQ14 -> 0:14 > <7>IRQ15 -> 0:15 > <7>IRQ16 -> 1:0 > <7>IRQ17 -> 1:1 > <7>IRQ18 -> 1:2 > <7>IRQ19 -> 1:3 > <7>IRQ20 -> 1:4 > <7>IRQ21 -> 1:5 > <7>IRQ22 -> 1:6 > <7>IRQ23 -> 1:7 > <7>IRQ24 -> 1:8 > <7>IRQ25 -> 1:9 > <7>IRQ26 -> 1:10 > <7>IRQ27 -> 1:11 > <7>IRQ28 -> 1:12 > <7>IRQ29 -> 1:13 > <7>IRQ30 -> 1:14 > <7>IRQ31 -> 1:15 > <7>IRQ32 -> 2:0 > <7>IRQ35 -> 2:3 > <7>IRQ37 -> 2:5 > <7>IRQ38 -> 2:6 > <7>IRQ39 -> 2:7 > <7>IRQ40 -> 2:8 > <7>IRQ41 -> 2:9 > <7>IRQ42 -> 2:10 > <7>IRQ43 -> 2:11 > <7>IRQ44 -> 2:12 > <7>IRQ45 -> 2:13 > <7>IRQ46 -> 2:14 > <7>IRQ47 -> 2:15 > <6>.................................... done. > <4>Using local APIC timer interrupts. > <4>calibrating APIC timer ... > <4>..... CPU clock speed is 1999.2879 MHz. > <4>..... host bus clock speed is 99.9641 MHz. > <4>cpu: 0, clocks: 999641, slice: 111071 > <4>CPU0 > <4>cpu: 2, clocks: 999641, slice: 111071 > <4>cpu: 3, clocks: 999641, slice: 111071 > <4>cpu: 1, clocks: 999641, slice: 111071 > <4>cpu: 7, clocks: 999641, slice: 111071 > <4>cpu: 4, clocks: 999641, slice: 111071 > <4>cpu: 6, clocks: 999641, slice: 111071 > <4>cpu: 5, clocks: 999641, slice: 111071 > <4>CPU1 > <4>CPU2 > <4>CPU3 > <4>CPU5 > <4>CPU4 > <4>CPU6 > <4>CPU7 > <4>checking TSC synchronization across CPUs: > <4>BIOS BUG: CPU#0 improperly initialized, has -2 usecs TSC > skew! FIXED. > <4>BIOS BUG: CPU#2 improperly initialized, has -2 usecs TSC > skew! FIXED. > <4>BIOS BUG: CPU#3 improperly initialized, has 4 usecs TSC > skew! FIXED. > <4>BIOS BUG: CPU#6 improperly initialized, has 2 usecs TSC > skew! FIXED. > <4>Waiting on wait_init_idle (map = 0xfe) > <4>All processors have done init_idle > <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 > <6>PCI: Using configuration type 1 > <6>PCI: Probing PCI hardware > <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 > <6>PCI: Discovered primary peer bus 03 [IRQ] > <6>PCI: Discovered primary peer bus 07 [IRQ] > <6>PCI: Discovered primary peer bus 0b [IRQ] > <6>PCI: Discovered primary peer bus 0f [IRQ] > <6>PCI: Discovered primary peer bus 13 [IRQ] > <6>PCI->APIC IRQ transform: (B0,I12,P0) -> 37 > <6>PCI->APIC IRQ transform: (B0,I13,P0) -> 41 > <6>PCI->APIC IRQ transform: (B0,I14,P0) -> 40 > <6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10 > <6>PCI->APIC IRQ transform: (B0,I16,P0) -> 39 > <6>PCI->APIC IRQ transform: (B0,I16,P1) -> 32 > <6>PCI->APIC IRQ transform: (B0,I16,P2) -> 38 > <6>PCI->APIC IRQ transform: (B0,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B3,I2,P0) -> 43 > <6>PCI->APIC IRQ transform: (B3,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B7,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B11,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B15,I30,P0) -> 35 > <6>PCI->APIC IRQ transform: (B19,I30,P0) -> 35 > <4>PCI: Device 00:78 not found by BIOS > <4>PCI: Device 00:7b not found by BIOS > <4>PCI: Device 00:b8 not found by BIOS > <4>PCI: Device 00:c0 not found by BIOS > <4>PCI: Device 00:c2 not found by BIOS > <4>PCI: Device 00:c4 not found by BIOS > <4>PCI: Device 00:c6 not found by BIOS > <4>PCI: Device 00:c8 not found by BIOS > <4>PCI: Device 00:ca not found by BIOS > <6>Linux NET4.0 for Linux 2.4 > <6>Based upon Swansea University Computer Society NET3.039 > <4>Initializing RT netlink socket > <4>Starting kswapd > <4>allocated 32 pages and 32 bhs reserved for the highmem bounces > <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > <4>pty: 256 Unix98 ptys configured > <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS > SHARE_IRQ SERIAL_PCI enabled > <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A > <6>Floppy drive(s): fd0 is 1.44M > <6>FDC 0 is a National Semiconductor PC87306 > <6>loop: loaded (max 8 devices) > <6>HP CISS Driver (v 2.4.42) > <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0 > <4>cciss: using DAC cycles > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <4>blk: queue c03d1000, I/O limit 4294967295Mb (mask > 0xffffffffffffffff) > <6>Partition check: > <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 > > <6> cciss/c0d1: p1 > <6>tg3.c:v1.5 (March 21, 2003) > <6>eth0: Tigon3 [partno(284685-003) rev 0105 PHY(5701)] > (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:52:3d:68 > <6>bonding.c:v2.4.20-20030320 (March 20, 2003) > <3>bonding_init(): either miimon or arp_interval and > arp_ip_target module parameters must be specified, otherwise > bonding will not detect link failures! see bonding.txt for details. > <6>bond0 registered without MII link monitoring, in load > balancing (round-robin) mode. > <6>bond0 registered without ARP monitoring > <6>Linux agpgart interface v0.99 (c) Jeff Hartmann > <6>agpgart: Maximum main memory to use for agp memory: 203M > <7>agpgart: no supported devices found. > <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 > <6>ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > <6>SvrWks CSB5: IDE controller at PCI slot 00:0f.1 > <6>SvrWks CSB5: chipset revision 147 > <6>SvrWks CSB5: not 100%% native mode: will probe irqs later > <6>SvrWks CSB5: simplex device: DMA forced > <6> ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio > <6>SvrWks CSB5: simplex device: DMA forced > <6> ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio > <4>hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive > <4>hda: set_drive_speed_status: status=0x51 { DriveReady > SeekComplete Error } > <4>hda: set_drive_speed_status: error=0x04 > <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > <4>hda: attached ide-cdrom driver. > <6>hda: ATAPI 24X CD-ROM drive, 128kB Cache > <6>Uniform CD-ROM driver Revision: 3.12 > <6>SCSI subsystem driver Revision: 1.00 > <3>kmod: failed to exec /sbin/modprobe -s -k > scsi_hostadapter, errno = 2 > <3>kmod: failed to exec /sbin/modprobe -s -k > scsi_hostadapter, errno = 2 > <6>NET4: Linux TCP/IP 1.0 for NET4.0 > <6>IP Protocols: ICMP, UDP, TCP, IGMP > <6>IP: routing cache hash table of 65536 buckets, 512Kbytes > <6>TCP: Hash tables configured (established 262144 bind 65536) > <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > <4>reiserfs: checking transaction log (device 68:01) ... > <4>reiserfs: replayed 6 transactions in 0 seconds > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>VFS: Mounted root (reiserfs filesystem) readonly. > <6>Freeing unused kernel memory: 500k freed > <6>Adding Swap: 2097136k swap-space (priority 42) > <4>reiserfs: checking transaction log (device 68:11) ... > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>reiserfs: checking transaction log (device 68:06) ... > <4>reiserfs: replayed 3 transactions in 0 seconds > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>reiserfs: checking transaction log (device 68:02) ... > <4>reiserfs: replayed 5 transactions in 0 seconds > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>reiserfs: checking transaction log (device 68:03) ... > <4>reiserfs: replayed 3 transactions in 0 seconds > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > > -------------------------------------------------------------------- > Of course I've seen the messages: > <3>BIOS bug, IO-APIC#0 ID 8 is already used!... > <3>... fixing up to 1. (tell your hw vendor) > > This is where without noapic the system hangs in HT mode. > are they better solutions to allow HT to work than noapic ? > > -------------------------------------------------------------------- > boot.log (8 CPU - with noapic which is the potion used for HT) > > Inspecting /boot/System.map > Loaded 18066 symbols from /boot/System.map. > Symbols match kernel version 2.4.21. > No module symbols loaded. > klogd 1.4.1, log source = ksyslog started. > <4>Linux version 2.4.21 (root@linux) (gcc version 3.2) #3 SMP > Tue Jun 17 17:32:56 CEST 2003 > <6>BIOS-provided physical RAM map: > <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable) > <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) > <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > <4> BIOS-e820: 0000000000100000 - 00000000efff0000 (usable) > <4> BIOS-e820: 00000000efff0000 - 00000000f0000000 (ACPI data) > <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > <4> BIOS-e820: 0000000100000000 - 000000010ffff000 (usable) > <5>3455MB HIGHMEM available. > <5>896MB LOWMEM available. > <4>found SMP MP-table at 000f4fd0 > <4>hm, page 000f4000 reserved twice. > <4>hm, page 000f5000 reserved twice. > <4>hm, page 000f7000 reserved twice. > <4>hm, page 000f8000 reserved twice. > <4>On node 0 totalpages: 1114111 > <4>zone(0): 4096 pages. > <4>zone(1): 225280 pages. > <4>zone(2): 884735 pages. > <6>ACPI: Searched entire block, no RSDP was found. > <6>ACPI: RSDP located at physical address c00f4f70 > <6>RSD PTR v0 [HP ] > <4>__va_range(0xefff0000, 0x68): idx=8 mapped at ffff6000 > <6>ACPI table found: RSDT v1 [HP P44 0.1] > <4>__va_range(0xefff0040, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff0040, 0x74): idx=8 mapped at ffff6000 > <6>ACPI table found: FACP v1 [HP P44 0.1] > <4>__va_range(0xefff0100, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 > <6>ACPI table found: APIC v1 [HP P44 0.1] > <4>__va_range(0xefff0100, 0xe0): idx=8 mapped at ffff6000 > <6>LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) > <6>CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0002] id[0x2] enabled[1]) > <6>CPU 1 (0x0200) enabledProcessor #2 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0003] id[0x4] enabled[1]) > <6>CPU 2 (0x0400) enabledProcessor #4 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0004] id[0x6] enabled[1]) > <6>CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0005] id[0x8] enabled[1]) > <6>CPU 4 (0x0800) enabledProcessor #8 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0006] id[0xa] enabled[1]) > <6>CPU 5 (0x0a00) enabledProcessor #10 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0007] id[0xc] enabled[1]) > <6>CPU 6 (0x0c00) enabledProcessor #12 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0008] id[0xe] enabled[1]) > <6>CPU 7 (0x0e00) enabledProcessor #14 Pentium 4(tm) XEON(tm) > APIC version 16 > <4> > <6>LAPIC (acpi_id[0x0009] id[0x1] enabled[0]) > <6>CPU 8 (0x0100) disabled > <6>LAPIC (acpi_id[0x000a] id[0x3] enabled[0]) > <6>CPU 9 (0x0300) disabled > <6>LAPIC (acpi_id[0x000b] id[0x5] enabled[0]) > <6>CPU 10 (0x0500) disabled > <6>LAPIC (acpi_id[0x000c] id[0x7] enabled[0]) > <6>CPU 11 (0x0700) disabled > <6>LAPIC (acpi_id[0x000d] id[0x9] enabled[0]) > <6>CPU 12 (0x0900) disabled > <6>LAPIC (acpi_id[0x000e] id[0xb] enabled[0]) > <6>CPU 13 (0x0b00) disabled > <6>LAPIC (acpi_id[0x000f] id[0xd] enabled[0]) > <6>CPU 14 (0x0d00) disabled > <6>LAPIC (acpi_id[0x0010] id[0xf] enabled[0]) > <6>CPU 15 (0x0f00) disabled > <6>IOAPIC (id[0x8] address[0xfec00000] global_irq_base[0x0]) > <6>IOAPIC (id[0x9] address[0xfec01000] global_irq_base[0x10]) > <6>IOAPIC (id[0xa] address[0xfec02000] global_irq_base[0x20]) > <6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] > trigger[0x1]) > <6>LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1]) > <6>16 CPUs total > <6>Local APIC address fee00000 > <4>__va_range(0xefff01e0, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff01e0, 0x58): idx=8 mapped at ffff6000 > <6>ACPI table found: SRAT v1 [HP P44 0.3] > <4>__va_range(0xefff0238, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff0238, 0x50): idx=8 mapped at ffff6000 > <6>ACPI table found: SPCR v1 [HP P44 0.1] > <4>__va_range(0xefff8000, 0x24): idx=8 mapped at ffff6000 > <4>__va_range(0xefff8000, 0x4fae): idx=8 mapped at ffff6000 > <6>ACPI table found: SSDT v1 [HP P44 0.2] > <4>Enabling the CPU's according to the ACPI table > <4>Intel MultiProcessor Specification v1.4 > <4> Virtual Wire compatibility mode. > <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 > <4>I/O APIC #8 Version 17 at 0xFEC00000. > <4>I/O APIC #9 Version 17 at 0xFEC01000. > <4>I/O APIC #10 Version 17 at 0xFEC02000. > <4>Enabling APIC mode: Flat. Using 3 I/O APICs > <4>Processors: 8 > <4>Kernel command line: root=/dev/cciss/c0d0p1 ide=nodma > apm=off acpi=off noapic > <6>ide_setup: ide=nodma : Prevented DMA > <6>Initializing CPU#0 > <4>Detected 1999.339 MHz processor. > <4>Console: colour VGA+ 80x25 > <4>Calibrating delay loop... 3984.58 BogoMIPS > <6>Memory: 4138352k/4456444k available (1594k kernel code, > 55496k reserved, 397k data, 500k init, 3276732k highmem) > <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Inode cache hash table entries: 262144 (order: 9, 2097152 bytes) > <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) > <4>Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes) > <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check architecture supported. > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <6>Enabling fast FPU save and restore... done. > <6>Enabling unmasked SIMD FPU exception support... done. > <6>Checking 'hlt' instruction... OK. > <4>POSIX conformance testing by UNIFIX > <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > <4>mtrr: detected mtrr type: Intel > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#0. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU0: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>per-CPU timeslice cutoff: 1462.74 usecs. > <4>enabled ExtINT on CPU#0 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Booting processor 1/2 eip 2000 > <6>Initializing CPU#1 > <4>masked ExtINT on CPU#1 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#1. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU1: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 2/4 eip 2000 > <6>Initializing CPU#2 > <4>masked ExtINT on CPU#2 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#2. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU2: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 3/6 eip 2000 > <6>Initializing CPU#3 > <4>masked ExtINT on CPU#3 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#3. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU3: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 4/8 eip 2000 > <6>Initializing CPU#4 > <4>masked ExtINT on CPU#4 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#4. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU4: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 5/10 eip 2000 > <6>Initializing CPU#5 > <4>masked ExtINT on CPU#5 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#5. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU5: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 6/12 eip 2000 > <6>Initializing CPU#6 > <4>masked ExtINT on CPU#6 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#6. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU6: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <4>Booting processor 7/14 eip 2000 > <6>Initializing CPU#7 > <4>masked ExtINT on CPU#7 > <4>ESR value before enabling vector: 00000000 > <4>ESR value after enabling vector: 00000000 > <4>Calibrating delay loop... 3997.69 BogoMIPS > <6>CPU: Trace cache: 12K uops, L1 D cache: 8K > <6>CPU: L2 cache: 512K > <6>CPU: L3 cache: 2048K > <6>CPU: Hyper-Threading is disabled > <6>Intel machine check reporting enabled on CPU#7. > <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 > <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 > <4>CPU7: Intel(R) XEON(TM) MP CPU 2.00GHz stepping 02 > <6>Total of 8 processors activated (31968.46 BogoMIPS). > <4>Using local APIC timer interrupts. > <4>calibrating APIC timer ... > <4>..... CPU clock speed is 1999.3407 MHz. > <4>..... host bus clock speed is 99.9668 MHz. > <4>cpu: 0, clocks: 999668, slice: 111074 > <4>CPU0 > <4>cpu: 2, clocks: 999668, slice: 111074 > <4>cpu: 1, clocks: 999668, slice: 111074 > <4>cpu: 3, clocks: 999668, slice: 111074 > <4>cpu: 6, clocks: 999668, slice: 111074 > <4>cpu: 7, clocks: 999668, slice: 111074 > <4>cpu: 5, clocks: 999668, slice: 111074 > <4>cpu: 4, clocks: 999668, slice: 111074 > <4>CPU1 > <4>CPU3 > <4>CPU2 > <4>CPU4 > <4>CPU7 > <4>CPU5 > <4>CPU6 > <4>checking TSC synchronization across CPUs: > <4>BIOS BUG: CPU#0 improperly initialized, has -3 usecs TSC > skew! FIXED. > <4>BIOS BUG: CPU#1 improperly initialized, has -2 usecs TSC > skew! FIXED. > <4>BIOS BUG: CPU#3 improperly initialized, has 7 usecs TSC > skew! FIXED. > <4>BIOS BUG: CPU#6 improperly initialized, has -2 usecs TSC > skew! FIXED. > <4>Waiting on wait_init_idle (map = 0xfe) > <4>All processors have done init_idle > <6>PCI: PCI BIOS revision 2.10 entry at 0xf1135, last bus=22 > <6>PCI: Using configuration type 1 > <6>PCI: Probing PCI hardware > <6>PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 > <6>PCI: Discovered primary peer bus 03 [IRQ] > <6>PCI: Discovered primary peer bus 07 [IRQ] > <6>PCI: Discovered primary peer bus 0b [IRQ] > <6>PCI: Discovered primary peer bus 0f [IRQ] > <6>PCI: Discovered primary peer bus 13 [IRQ] > <4>PCI: Device 00:78 not found by BIOS > <4>PCI: Device 00:7b not found by BIOS > <4>PCI: Device 00:b8 not found by BIOS > <4>PCI: Device 00:c0 not found by BIOS > <4>PCI: Device 00:c2 not found by BIOS > <4>PCI: Device 00:c4 not found by BIOS > <4>PCI: Device 00:c6 not found by BIOS > <4>PCI: Device 00:c8 not found by BIOS > <4>PCI: Device 00:ca not found by BIOS > <6>Linux NET4.0 for Linux 2.4 > <6>Based upon Swansea University Computer Society NET3.039 > <4>Initializing RT netlink socket > <4>Starting kswapd > <4>allocated 32 pages and 32 bhs reserved for the highmem bounces > <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > <4>pty: 256 Unix98 ptys configured > <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS > SHARE_IRQ SERIAL_PCI enabled > <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A > <6>Floppy drive(s): fd0 is 1.44M > <6>FDC 0 is a National Semiconductor PC87306 > <6>loop: loaded (max 8 devices) > <6>HP CISS Driver (v 2.4.42) > <7>cciss: Device 0xb178 has been found at bus 0 dev 14 func 0 > <4>cciss: using DAC cycles > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <6> blocks= 35553120 block_size= 512 > <6> heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1) > <4> > <4>blk: queue c03d1000, I/O limit 4294967295Mb (mask > 0xffffffffffffffff) > <6>Partition check: > <6> cciss/c0d0: p1 p2 p3 p4 < p5 p6 > > <6> cciss/c0d1: p1 > <6>tg3.c:v1.5 (March 21, 2003) > <6>eth0: Tigon3 [partno(284685-003) rev 0105 PHY(5701)] > (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:52:3d:68 > <6>bonding.c:v2.4.20-20030320 (March 20, 2003) > <3>bonding_init(): either miimon or arp_interval and > arp_ip_target module parameters must be specified, otherwise > bonding will not detect link failures! see bonding.txt for details. > <6>bond0 registered without MII link monitoring, in load > balancing (round-robin) mode. > <6>bond0 registered without ARP monitoring > <6>Linux agpgart interface v0.99 (c) Jeff Hartmann > <6>agpgart: Maximum main memory to use for agp memory: 203M > <7>agpgart: no supported devices found. > <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 > <6>ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > <6>SvrWks CSB5: IDE controller at PCI slot 00:0f.1 > <6>SvrWks CSB5: chipset revision 147 > <6>SvrWks CSB5: not 100%% native mode: will probe irqs later > <6>SvrWks CSB5: simplex device: DMA forced > <6> ide0: BM-DMA at 0x2820-0x2827, BIOS settings: hda:pio, hdb:pio > <6>SvrWks CSB5: simplex device: DMA forced > <6> ide1: BM-DMA at 0x2828-0x282f, BIOS settings: hdc:pio, hdd:pio > <4>hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive > <4>hda: set_drive_speed_status: status=0x51 { DriveReady > SeekComplete Error } > <4>hda: set_drive_speed_status: error=0x04 > <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > <4>hda: attached ide-cdrom driver. > <6>hda: ATAPI 24X CD-ROM drive, 128kB Cache > <6>Uniform CD-ROM driver Revision: 3.12 > <6>SCSI subsystem driver Revision: 1.00 > <3>kmod: failed to exec /sbin/modprobe -s -k > scsi_hostadapter, errno = 2 > <3>kmod: failed to exec /sbin/modprobe -s -k > scsi_hostadapter, errno = 2 > <6>NET4: Linux TCP/IP 1.0 for NET4.0 > <6>IP Protocols: ICMP, UDP, TCP, IGMP > <6>IP: routing cache hash table of 65536 buckets, 512Kbytes > <6>TCP: Hash tables configured (established 262144 bind 65536) > <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > <4>reiserfs: checking transaction log (device 68:01) ... > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>VFS: Mounted root (reiserfs filesystem) readonly. > <6>Freeing unused kernel memory: 500k freed > <6>Adding Swap: 2097136k swap-space (priority 42) > <4>reiserfs: checking transaction log (device 68:11) ... > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>reiserfs: checking transaction log (device 68:06) ... > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>reiserfs: checking transaction log (device 68:02) ... > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > <4>reiserfs: checking transaction log (device 68:03) ... > <4>Using r5 hash to sort names > <4>ReiserFS version 3.6.25 > -------------------------------------------------------------------- > I've also messages like this one in /var/log/messages: > Jun 17 17:49:24 linux kernel: mtrr: type mismatch for > f6000000,800000 old: write-back new: write-combining > -------------------------------------------------------------------- > > Let me know if I need to send other logs from the system. > Any hint to help me solve the issue would be welcome. > > Thanks in advance, > Bruno. > -- > Linux Solution Consultant T?l: +33 476 143 278 - Fax: > +33 476 146 105 > HP/Intel Solution Center http://hpintelco.net Hewlett-Packard > Grenoble/France > Des infos sur Linux? http://www.HyPer-Linux.org http://www.hp.com/linux La musique ancienne? http://www.musique-ancienne.org http://www.medieval.org - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/