Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265431AbTFSEtu (ORCPT ); Thu, 19 Jun 2003 00:49:50 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265433AbTFSEtu (ORCPT ); Thu, 19 Jun 2003 00:49:50 -0400 Received: from tehunlose.com ([68.15.181.213]:22699 "EHLO cerebellum.tehunlose.com") by vger.kernel.org with ESMTP id S265431AbTFSEtj (ORCPT ); Thu, 19 Jun 2003 00:49:39 -0400 From: Zack Gilburd To: linux-kernel@vger.kernel.org Subject: aic7xxx and SiI3112 problems (2.4.21[-ac1] and 2.5.7x) Date: Wed, 18 Jun 2003 22:03:34 -0700 User-Agent: KMail/1.5.2 MIME-Version: 1.0 Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg=pgp-sha1; boundary="Boundary-02=_oQU8+lkqff6vMcK"; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <200306182203.36845.zack@tehunlose.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20294 Lines: 495 --Boundary-02=_oQU8+lkqff6vMcK Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Description: signed data Content-Disposition: inline Long reader, first time poster -- please go lightly if I've forgotten to=20 include any essential information. I have an Adaptec 29160N that uses the aic7xxx driver. I have had no probl= ems=20 with this driver in 2.4.20, but in 2.4.21, my drives fail parity checks. =20 I've gone back and forward between 2.4.20 kernels and 2.4.21 kernels just t= o=20 make sure it wasn't the drive's fault. The exact error message(s) are at t= he=20 middle-end of this email. I have tried to solve the problem by disabling parity checks on the card to= no=20 avail. I've also tried compiling certain options in with the driver to,=20 again, no avail. Now, on to the SiI3112 problems that I am having. When I run the 2.5.7x=20 kernel without the SiI3112 support, everything goes along just fine. =20 However, when I compile support in, I recieve the errors at the VERY end of= =20 this email. The errors eventually go away (or at least they're no longer=20 reported to me in metalog) after mid-boot (when Gentoo is "calculating modu= le=20 dependencies"). If I log in and try to do anything regarding the disk=20 (including but not limited to both `hdparm -i /dev/hdX` and `fdisk=20 /dev/hdX`), the system hardlocks and I cannot even SSH in. Of course, IANAKH so I can't contribute patches, sorry. Any help is very appreciated ******** aic7xxx stuff in 2.4.21[-ac1] ******** SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs blk: queue f7e6f014, I/O limit 4095Mb (mask 0xffffffff) Vendor: QUANTUM Model: ATLAS10K3_18_WLS Rev: 020W Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7e6f214, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) (scsi0:A:6:1): parity error detected in Data-in phase. SEQADDR(0x77)=20 SCSIRATE(0xc2) CRC Value Mismatch scsi0:A:6:0: Tagged Queuing enabled. Depth 253 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB) /dev/scsi/host0/bus0/target6/lun0:(scsi0:A:6:0): parity error detected in= =20 Data-in phase. SEQADDR(0x8b) SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 0 (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a3)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 2 (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 4 (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 6 (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 0 (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x89)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 2 (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 4 (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8b)=20 SCSIRATE(0xc2) CRC Value Mismatch (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x8a)=20 SCSIRATE(0xc2) CRC Value Mismatch SCSI disk error : host 0 channel 0 id 6 lun 0 return code =3D 8000002 Current sd08:00: sns =3D 70 b ASC=3D48 ASCQ=3D 0 Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00= =20 0x48 0x00 0x00 0x00 0x00 0x00 I/O error: dev 08:00, sector 6 unable to read partition table ******** END OF aic7xxx stuff in 2.4.21[-ac1] ******** ******** START OF SiI3112 errors in 2.5.7x ****** Jun 16 15:34:37 [kernel] bad: scheduling while atomic! Jun 16 15:34:37 [kernel] bad: scheduling while atomic! - Last output repeated 243 times - Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! Jun 16 15:34:38 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:38 [kernel] bad: scheduling while atomic! - Last output repeated 153 times - Jun 16 15:34:40 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:40 [kernel] bad: scheduling while atomic! - Last output repeated 149 times - Jun 16 15:34:44 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:44 [kernel] bad: scheduling while atomic! Jun 16 15:34:44 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:44 [kernel] bad: scheduling while atomic! Jun 16 15:34:44 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:44 [kernel] bad: scheduling while atomic! Jun 16 15:34:44 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:44 [kernel] bad: scheduling while atomic! Jun 16 15:34:44 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! Jun 16 15:34:45 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:45 [kernel] bad: scheduling while atomic! - Last output repeated 734 times - Jun 16 15:34:46 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:46 [kernel] bad: scheduling while atomic! Jun 16 15:34:46 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:46 [kernel] bad: scheduling while atomic! Jun 16 15:34:46 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:46 [kernel] bad: scheduling while atomic! Jun 16 15:34:46 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:46 [kernel] bad: scheduling while atomic! - Last output repeated 43 times - Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [] =20 [] Jun 16 15:34:48 [kernel] bad: scheduling while atomic! Jun 16 15:34:48 [kernel] Call Trace: [] [] [] =20 [] [] [] [] [