Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265787AbTFSPED (ORCPT ); Thu, 19 Jun 2003 11:04:03 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265788AbTFSPED (ORCPT ); Thu, 19 Jun 2003 11:04:03 -0400 Received: from h-68-165-86-241.DLLATX37.covad.net ([68.165.86.241]:54116 "EHLO sol.microgate.com") by vger.kernel.org with ESMTP id S265787AbTFSPDv (ORCPT ); Thu, 19 Jun 2003 11:03:51 -0400 Subject: [PATCH] 2.4.21 synclink.c From: Paul Fulghum To: "linux-kernel@vger.kernel.org" Cc: "marcelo@conectiva.com.br" Content-Type: text/plain Organization: Message-Id: <1056035884.2037.2.camel@diemos> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.2.2 (1.2.2-5) Date: 19 Jun 2003 10:18:05 -0500 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8461 Lines: 266 * Add support for version 2 of synclink PCI adapter * Fix arbitration between net open and tty open * Use time_after() macro * Use mod_timer() macro Please apply. -- Paul Fulghum, paulkf@microgate.com Microgate Corporation, http://www.microgate.com --- linux-2.4.21/drivers/char/synclink.c 2002-11-28 17:53:12.000000000 -0600 +++ linux-2.4.21-mg/drivers/char/synclink.c 2003-06-19 08:25:43.000000000 -0500 @@ -1,7 +1,7 @@ /* * linux/drivers/char/synclink.c * - * $Id: synclink.c,v 3.12 2001/07/18 19:14:21 paulkf Exp $ + * $Id: synclink.c,v 3.18 2003/06/18 21:02:25 paulkf Exp $ * * Device driver for Microgate SyncLink ISA and PCI * high speed multiprotocol serial adapters. @@ -198,6 +198,7 @@ int flags; int count; /* count of opens */ int line; + int hw_version; unsigned short close_delay; unsigned short closing_wait; /* time to wait before closing */ @@ -922,7 +923,7 @@ MODULE_PARM(txholdbufs,"1-" __MODULE_STRING(MAX_TOTAL_DEVICES) "i"); static char *driver_name = "SyncLink serial driver"; -static char *driver_version = "$Revision: 3.12 $"; +static char *driver_version = "$Revision: 3.18 $"; static int __init synclink_init_one (struct pci_dev *dev, const struct pci_device_id *ent); @@ -930,6 +931,7 @@ static struct pci_device_id synclink_pci_tbl[] __devinitdata = { { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, }, { 0, }, /* terminate list */ }; MODULE_DEVICE_TABLE(pci, synclink_pci_tbl); @@ -3251,14 +3253,17 @@ { struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; - if (!info || mgsl_paranoia_check(info, tty->device, "mgsl_close")) + if (mgsl_paranoia_check(info, tty->device, "mgsl_close")) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_close(%s) entry, count=%d\n", __FILE__,__LINE__, info->device_name, info->count); - if (!info->count || tty_hung_up_p(filp)) + if (!info->count) + return; + + if (tty_hung_up_p(filp)) goto cleanup; if ((tty->count == 1) && (info->count != 1)) { @@ -3393,7 +3398,7 @@ schedule_timeout(char_time); if (signal_pending(current)) break; - if (timeout && ((orig_jiffies + timeout) < jiffies)) + if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } } else { @@ -3403,7 +3408,7 @@ schedule_timeout(char_time); if (signal_pending(current)) break; - if (timeout && ((orig_jiffies + timeout) < jiffies)) + if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } } @@ -3612,16 +3617,11 @@ info = mgsl_device_list; while(info && info->line != line) info = info->next_device; - if ( !info ){ - printk("%s(%d):Can't find specified device on open (line=%d)\n", - __FILE__,__LINE__,line); + if (mgsl_paranoia_check(info, tty->device, "mgsl_open")) return -ENODEV; - } tty->driver_data = info; info->tty = tty; - if (mgsl_paranoia_check(info, tty->device, "mgsl_open")) - return -ENODEV; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgsl_open(%s), old ref count = %d\n", @@ -3695,6 +3695,8 @@ cleanup: if (retval) { + if (tty->count == 1) + info->tty = 0; /* tty layer will release tty struct */ if(MOD_IN_USE) MOD_DEC_USE_COUNT; if(info->count) @@ -4291,9 +4293,7 @@ info->get_tx_holding_index=0; /* restart transmit timer */ - del_timer(&info->tx_timer); - info->tx_timer.expires = jiffies + jiffies_from_ms(5000); - add_timer(&info->tx_timer); + mod_timer(&info->tx_timer, jiffies + jiffies_from_ms(5000)); ret = 1; } @@ -4511,12 +4511,12 @@ info->max_frame_size = 65535; if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { - printk( "SyncLink device %s added:PCI bus IO=%04X IRQ=%d Mem=%08X LCR=%08X MaxFrameSize=%u\n", - info->device_name, info->io_base, info->irq_level, + printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n", + info->hw_version + 1, info->device_name, info->io_base, info->irq_level, info->phys_memory_base, info->phys_lcr_base, info->max_frame_size ); } else { - printk( "SyncLink device %s added:ISA bus IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n", + printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n", info->device_name, info->io_base, info->irq_level, info->dma_level, info->max_frame_size ); } @@ -5375,10 +5375,11 @@ info->mbre_bit = BIT8; outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */ - /* Enable DMAEN (Port 7, Bit 14) */ - /* This connects the DMA request signal to the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg( info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14) ); + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable DMAEN (Port 7, Bit 14) */ + /* This connects the DMA request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14)); + } /* DMA Control Register (DCR) * @@ -6355,10 +6356,11 @@ usc_EnableMasterIrqBit( info ); - /* Enable INTEN (Port 6, Bit12) */ - /* This connects the IRQ request signal to the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg( info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12) ); + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); + } } /* end of usc_set_async_mode() */ @@ -6449,10 +6451,11 @@ usc_loopback_frame( info ); usc_set_sdlc_mode( info ); - /* Enable INTEN (Port 6, Bit12) */ - /* This connects the IRQ request signal to the ISA bus */ - /* on the ISA adapter. This has no effect for the PCI adapter */ - usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); + } usc_enable_aux_clock(info, info->params.clock_speed); @@ -7496,7 +7499,7 @@ EndTime = jiffies + jiffies_from_ms(100); for(;;) { - if ( jiffies > EndTime ) { + if (time_after(jiffies, EndTime)) { rc = FALSE; break; } @@ -7552,7 +7555,7 @@ EndTime = jiffies + jiffies_from_ms(100); for(;;) { - if ( jiffies > EndTime ) { + if (time_after(jiffies, EndTime)) { rc = FALSE; break; } @@ -7600,7 +7603,7 @@ spin_unlock_irqrestore(&info->irq_spinlock,flags); while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) { - if ( jiffies > EndTime ) { + if (time_after(jiffies, EndTime)) { rc = FALSE; break; } @@ -7627,8 +7630,7 @@ /* Wait for 16C32 to write receive status to buffer entry. */ status=info->rx_buffer_list[0].status; while ( status == 0 ) { - if ( jiffies > EndTime ) { - printk(KERN_ERR"mark 4\n"); + if (time_after(jiffies, EndTime)) { rc = FALSE; break; } @@ -8202,17 +8204,20 @@ info->bus_type = MGSL_BUS_TYPE_PCI; info->io_addr_size = 8; info->irq_flags = SA_SHIRQ; - - /* Store the PCI9050 misc control register value because a flaw - * in the PCI9050 prevents LCR registers from being read if - * BIOS assigns an LCR base address with bit 7 set. - * - * Only the misc control register is accessed for which only - * write access is needed, so set an initial value and change - * bits to the device instance data as we write the value - * to the actual misc control register. - */ - info->misc_ctrl_value = 0x087e4546; + + if (dev->device == 0x0210) { + /* Version 1 PCI9030 based universal PCI adapter */ + info->misc_ctrl_value = 0x007c4080; + info->hw_version = 1; + } else { + /* Version 0 PCI9050 based 5V PCI adapter + * A PCI9050 bug prevents reading LCR registers if + * LCR base address bit 7 is set. Maintain shadow + * value so we can write to LCR misc control reg. + */ + info->misc_ctrl_value = 0x087e4546; + info->hw_version = 0; + } mgsl_add_device(info); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/