Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751312AbdGQHgy (ORCPT ); Mon, 17 Jul 2017 03:36:54 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:51666 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751261AbdGQHgw (ORCPT ); Mon, 17 Jul 2017 03:36:52 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Date: Mon, 17 Jul 2017 13:06:49 +0530 From: Abhishek Sahu To: Sricharan R Cc: dwmw2@infradead.org, computersforpeace@gmail.com, boris.brezillon@free-electrons.com, marek.vasut@gmail.com, richard@nod.at, cyrille.pitchen@wedev4u.fr, robh+dt@kernel.org, mark.rutland@arm.com, linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, andy.gross@linaro.org, architt@codeaurora.org Subject: Re: [PATCH 10/14] qcom: mtd: nand: support for QPIC Page read/write In-Reply-To: <4e0a4152-37f0-183f-cb6f-3b8808b6e06f@codeaurora.org> References: <1498720566-20782-1-git-send-email-absahu@codeaurora.org> <1498720566-20782-11-git-send-email-absahu@codeaurora.org> <4e0a4152-37f0-183f-cb6f-3b8808b6e06f@codeaurora.org> Message-ID: <0b563036402d19b25eb5031d8c221d7c@codeaurora.org> User-Agent: Roundcube Webmail/1.2.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14656 Lines: 474 On 2017-07-10 19:48, Sricharan R wrote: > On 6/29/2017 12:46 PM, Abhishek Sahu wrote: >> 1. Add the function for command descriptor preparation which >> will be used only by BAM DMA and it will form the DMA descriptors >> containing command elements. >> >> 2. Add the data descriptor preparation function which will be used >> only by BAM DMA for forming the data SGL’s. >> >> 3. Add clear BAM transaction and call it before every new request >> >> 4. Check DMA mode for ADM or BAM and call the appropriate >> descriptor formation function. >> >> 5. Enable the BAM in NAND_CTRL. >> > > Should this patch be patch #8 and then add other support ? > The original plan was to add other these function and finally enable the operation but it was generating the unused functions warnings that's why I need to club all these together in the last patch. anyway, I will check once again and will reorder if possible. > Regards, > Sricharan > > >> Signed-off-by: Abhishek Sahu >> --- >> drivers/mtd/nand/qcom_nandc.c | 190 >> +++++++++++++++++++++++++++++++++++++++--- >> 1 file changed, 180 insertions(+), 10 deletions(-) >> >> diff --git a/drivers/mtd/nand/qcom_nandc.c >> b/drivers/mtd/nand/qcom_nandc.c >> index 17766af..4c6e594 100644 >> --- a/drivers/mtd/nand/qcom_nandc.c >> +++ b/drivers/mtd/nand/qcom_nandc.c >> @@ -156,6 +156,8 @@ >> #define FETCH_ID 0xb >> #define RESET_DEVICE 0xd >> >> +/* NAND_CTRL bits */ >> +#define BAM_MODE_EN BIT(0) >> /* >> * the NAND controller performs reads/writes with ECC in 516 byte >> chunks. >> * the driver calls the chunks 'step' or 'codeword' interchangeably >> @@ -190,6 +192,14 @@ >> */ >> #define NAND_ERASED_CW_SET (0x0008) >> >> +/* Returns the dma address for reg read buffer */ >> +#define REG_BUF_DMA_ADDR(chip, vaddr) \ >> + ((chip)->reg_read_buf_phys + \ >> + ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf)) >> + >> +/* Returns the NAND register physical address */ >> +#define NAND_REG_PHYS(chip, offset) ((chip)->base_phys + (offset)) >> + >> #define QPIC_PER_CW_MAX_CMD_ELEMENTS (32) >> #define QPIC_PER_CW_MAX_CMD_SGL (32) >> #define QPIC_PER_CW_MAX_DATA_SGL (8) >> @@ -287,7 +297,8 @@ struct nandc_regs { >> * controller >> * @dev: parent device >> * @base: MMIO base >> - * @base_dma: physical base address of controller registers >> + * @base_phys: physical base address of controller registers >> + * @base_dma: dma base address of controller registers >> * @core_clk: controller clock >> * @aon_clk: another controller clock >> * >> @@ -323,6 +334,7 @@ struct qcom_nand_controller { >> struct device *dev; >> >> void __iomem *base; >> + phys_addr_t base_phys; >> dma_addr_t base_dma; >> >> struct clk *core_clk; >> @@ -467,6 +479,29 @@ static void free_bam_transaction(struct >> qcom_nand_controller *nandc) >> return bam_txn; >> } >> >> +/* Clears the BAM transaction indexes */ >> +static void clear_bam_transaction(struct qcom_nand_controller *nandc) >> +{ >> + struct bam_transaction *bam_txn = nandc->bam_txn; >> + >> + if (!nandc->dma_bam_enabled) >> + return; >> + >> + bam_txn->bam_ce_pos = 0; >> + bam_txn->bam_ce_start = 0; >> + bam_txn->cmd_sgl_pos = 0; >> + bam_txn->cmd_sgl_start = 0; >> + bam_txn->tx_sgl_pos = 0; >> + bam_txn->tx_sgl_start = 0; >> + bam_txn->rx_sgl_pos = 0; >> + bam_txn->rx_sgl_start = 0; >> + >> + sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage * >> + QPIC_PER_CW_MAX_CMD_SGL); >> + sg_init_table(bam_txn->data_sg, nandc->max_cwperpage * >> + QPIC_PER_CW_MAX_DATA_SGL); >> +} >> + >> static inline struct qcom_nand_host *to_qcom_nand_host(struct >> nand_chip >> *chip) >> { >> return container_of(chip, struct qcom_nand_host, chip); >> @@ -682,6 +717,102 @@ static int prepare_bam_async_desc(struct >> qcom_nand_controller *nandc, >> return 0; >> } >> >> +/* >> + * Prepares the command descriptor for BAM DMA which will be used for >> NAND >> + * register reads and writes. The command descriptor requires the >> command >> + * to be formed in command element type so this function uses the >> command >> + * element from bam transaction ce array and fills the same with >> required >> + * data. A single SGL can contain multiple command elements so >> + * NAND_BAM_NEXT_SGL will be used for starting the separate SGL >> + * after the current command element. >> + */ >> +static int prep_dma_desc_command(struct qcom_nand_controller *nandc, >> bool >> read, >> + int reg_off, const void *vaddr, >> + int size, unsigned int flags) >> +{ >> + int bam_ce_size; >> + int i, ret; >> + struct bam_cmd_element *bam_ce_buffer; >> + struct bam_transaction *bam_txn = nandc->bam_txn; >> + >> + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos]; >> + >> + /* fill the command desc */ >> + for (i = 0; i < size; i++) { >> + if (read) >> + bam_prep_ce(&bam_ce_buffer[i], >> + NAND_REG_PHYS(nandc, reg_off + 4 * i), >> + BAM_READ_COMMAND, >> + REG_BUF_DMA_ADDR(nandc, >> + (__le32 *)vaddr + i)); >> + else >> + bam_prep_ce_le32(&bam_ce_buffer[i], >> + NAND_REG_PHYS(nandc, reg_off + 4 * i), >> + BAM_WRITE_COMMAND, >> + *((__le32 *)vaddr + i)); >> + } >> + >> + bam_txn->bam_ce_pos += size; >> + >> + /* use the separate sgl after this command */ >> + if (flags & NAND_BAM_NEXT_SGL) { >> + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start]; >> + bam_ce_size = (bam_txn->bam_ce_pos - >> + bam_txn->bam_ce_start) * >> + sizeof(struct bam_cmd_element); >> + sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos], >> + bam_ce_buffer, bam_ce_size); >> + bam_txn->cmd_sgl_pos++; >> + bam_txn->bam_ce_start = bam_txn->bam_ce_pos; >> + >> + if (flags & NAND_BAM_NWD) { >> + ret = prepare_bam_async_desc(nandc, nandc->cmd_chan, >> + DMA_PREP_FENCE | >> + DMA_PREP_CMD); >> + if (ret) >> + return ret; >> + } >> + } >> + >> + return 0; >> +} >> + >> +/* >> + * Prepares the data descriptor for BAM DMA which will be used for >> NAND >> + * data reads and writes. >> + */ >> +static int prep_dma_desc_data_bam(struct qcom_nand_controller *nandc, >> bool read, >> + int reg_off, const void *vaddr, >> + int size, unsigned int flags) >> +{ >> + int ret; >> + struct bam_transaction *bam_txn = nandc->bam_txn; >> + >> + if (read) { >> + sg_set_buf(&bam_txn->data_sg[bam_txn->rx_sgl_pos], >> + vaddr, size); >> + bam_txn->rx_sgl_pos++; >> + } else { >> + sg_set_buf(&bam_txn->data_sg[bam_txn->tx_sgl_pos], >> + vaddr, size); >> + bam_txn->tx_sgl_pos++; >> + >> + /* >> + * BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag >> + * is not set, form the DMA descriptor >> + */ >> + if (!(flags & NAND_BAM_NO_EOT)) { >> + ret = prepare_bam_async_desc(nandc, nandc->tx_chan, >> + DMA_PREP_INTERRUPT); >> + if (ret) >> + return ret; >> + } >> + } >> + >> + return 0; >> +} >> + >> +/* Prepares the dma descriptor for adm dma engine */ >> static int prep_dma_desc(struct qcom_nand_controller *nandc, bool >> read, >> int reg_off, const void *vaddr, int size, >> bool flow_control) >> @@ -764,16 +895,19 @@ static int read_reg_dma(struct >> qcom_nand_controller >> *nandc, int first, >> { >> bool flow_control = false; >> void *vaddr; >> - int size; >> >> if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) >> flow_control = true; >> >> - size = num_regs * sizeof(u32); >> vaddr = nandc->reg_read_buf + nandc->reg_read_pos; >> nandc->reg_read_pos += num_regs; >> >> - return prep_dma_desc(nandc, true, first, vaddr, size, flow_control); >> + if (nandc->dma_bam_enabled) >> + return prep_dma_desc_command(nandc, true, first, vaddr, >> + num_regs, flags); >> + >> + return prep_dma_desc(nandc, true, first, vaddr, num_regs * >> sizeof(u32), >> + flow_control); >> } >> >> /* >> @@ -789,7 +923,6 @@ static int write_reg_dma(struct >> qcom_nand_controller >> *nandc, int first, >> bool flow_control = false; >> struct nandc_regs *regs = nandc->regs; >> void *vaddr; >> - int size; >> >> vaddr = offset_to_nandc_reg(regs, first); >> >> @@ -812,9 +945,12 @@ static int write_reg_dma(struct >> qcom_nand_controller >> *nandc, int first, >> if (first == NAND_DEV_CMD_VLD_RESTORE) >> first = NAND_DEV_CMD_VLD; >> >> - size = num_regs * sizeof(u32); >> + if (nandc->dma_bam_enabled) >> + return prep_dma_desc_command(nandc, false, first, vaddr, >> + num_regs, flags); >> >> - return prep_dma_desc(nandc, false, first, vaddr, size, >> flow_control); >> + return prep_dma_desc(nandc, false, first, vaddr, num_regs * >> sizeof(u32), >> + flow_control); >> } >> >> /* >> @@ -828,6 +964,10 @@ static int write_reg_dma(struct >> qcom_nand_controller >> *nandc, int first, >> static int read_data_dma(struct qcom_nand_controller *nandc, int >> reg_off, >> const u8 *vaddr, int size, unsigned int flags) >> { >> + if (nandc->dma_bam_enabled) >> + return prep_dma_desc_data_bam(nandc, true, reg_off, vaddr, size, >> + flags); >> + >> return prep_dma_desc(nandc, true, reg_off, vaddr, size, false); >> } >> >> @@ -842,6 +982,10 @@ static int read_data_dma(struct >> qcom_nand_controller >> *nandc, int reg_off, >> static int write_data_dma(struct qcom_nand_controller *nandc, int >> reg_off, >> const u8 *vaddr, int size, unsigned int flags) >> { >> + if (nandc->dma_bam_enabled) >> + return prep_dma_desc_data_bam(nandc, false, reg_off, vaddr, >> + size, flags); >> + >> return prep_dma_desc(nandc, false, reg_off, vaddr, size, false); >> } >> >> @@ -931,6 +1075,8 @@ static int nandc_param(struct qcom_nand_host >> *host) >> struct nand_chip *chip = &host->chip; >> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); >> >> + clear_bam_transaction(nandc); >> + >> /* >> * NAND_CMD_PARAM is called before we know much about the FLASH chip >> * in use. we configure the controller to perform a raw read of 512 >> @@ -993,6 +1139,8 @@ static int erase_block(struct qcom_nand_host >> *host, >> int page_addr) >> struct nand_chip *chip = &host->chip; >> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); >> >> + clear_bam_transaction(nandc); >> + >> nandc_set_reg(nandc, NAND_FLASH_CMD, >> BLOCK_ERASE | PAGE_ACC | LAST_PAGE); >> nandc_set_reg(nandc, NAND_ADDR0, page_addr); >> @@ -1025,10 +1173,13 @@ static int read_id(struct qcom_nand_host >> *host, >> int column) >> if (column == -1) >> return 0; >> >> + clear_bam_transaction(nandc); >> + >> nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); >> nandc_set_reg(nandc, NAND_ADDR0, column); >> nandc_set_reg(nandc, NAND_ADDR1, 0); >> - nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); >> + nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, >> + nandc->dma_bam_enabled ? 0 : DM_EN); >> nandc_set_reg(nandc, NAND_EXEC_CMD, 1); >> >> write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL); >> @@ -1045,6 +1196,8 @@ static int reset(struct qcom_nand_host *host) >> struct nand_chip *chip = &host->chip; >> struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); >> >> + clear_bam_transaction(nandc); >> + >> nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); >> nandc_set_reg(nandc, NAND_EXEC_CMD, 1); >> >> @@ -1561,6 +1714,7 @@ static int qcom_nandc_read_page(struct mtd_info >> *mtd, struct nand_chip *chip, >> data_buf = buf; >> oob_buf = oob_required ? chip->oob_poi : NULL; >> >> + clear_bam_transaction(nandc); >> ret = read_page_ecc(host, data_buf, oob_buf); >> if (ret) { >> dev_err(nandc->dev, "failure to read page\n"); >> @@ -1585,6 +1739,8 @@ static int qcom_nandc_read_page_raw(struct >> mtd_info >> *mtd, >> oob_buf = chip->oob_poi; >> >> host->use_ecc = false; >> + >> + clear_bam_transaction(nandc); >> update_rw_regs(host, ecc->steps, true); >> >> for (i = 0; i < ecc->steps; i++) { >> @@ -1641,6 +1797,7 @@ static int qcom_nandc_read_oob(struct mtd_info >> *mtd, >> struct nand_chip *chip, >> int ret; >> >> clear_read_regs(nandc); >> + clear_bam_transaction(nandc); >> >> host->use_ecc = true; >> set_address(host, 0, page); >> @@ -1664,6 +1821,7 @@ static int qcom_nandc_write_page(struct mtd_info >> *mtd, struct nand_chip *chip, >> int i, ret; >> >> clear_read_regs(nandc); >> + clear_bam_transaction(nandc); >> >> data_buf = (u8 *)buf; >> oob_buf = chip->oob_poi; >> @@ -1729,6 +1887,7 @@ static int qcom_nandc_write_page_raw(struct >> mtd_info >> *mtd, >> int i, ret; >> >> clear_read_regs(nandc); >> + clear_bam_transaction(nandc); >> >> data_buf = (u8 *)buf; >> oob_buf = chip->oob_poi; >> @@ -1803,6 +1962,7 @@ static int qcom_nandc_write_oob(struct mtd_info >> *mtd, struct nand_chip *chip, >> >> host->use_ecc = true; >> >> + clear_bam_transaction(nandc); >> ret = copy_last_cw(host, page); >> if (ret) >> return ret; >> @@ -1860,6 +2020,7 @@ static int qcom_nandc_block_bad(struct mtd_info >> *mtd, loff_t ofs) >> */ >> host->use_ecc = false; >> >> + clear_bam_transaction(nandc); >> ret = copy_last_cw(host, page); >> if (ret) >> goto err; >> @@ -1890,6 +2051,7 @@ static int qcom_nandc_block_markbad(struct >> mtd_info >> *mtd, loff_t ofs) >> int page, ret, status = 0; >> >> clear_read_regs(nandc); >> + clear_bam_transaction(nandc); >> >> /* >> * to mark the BBM as bad, we flash the entire last codeword with >> 0s. >> @@ -2396,11 +2558,18 @@ static void qcom_nandc_unalloc(struct >> qcom_nand_controller *nandc) >> /* one time setup of a few nand controller registers */ >> static int qcom_nandc_setup(struct qcom_nand_controller *nandc) >> { >> + u32 nand_ctrl; >> + >> /* kill onenand */ >> nandc_write(nandc, SFLASHC_BURST_CFG, 0); >> >> - /* enable ADM DMA */ >> - nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); >> + /* enable ADM or BAM DMA */ >> + if (!nandc->dma_bam_enabled) { >> + nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); >> + } else { >> + nand_ctrl = nandc_read(nandc, NAND_CTRL); >> + nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN); >> + } >> >> /* save the original values of these registers */ >> nandc->cmd1 = nandc_read(nandc, NAND_DEV_CMD1); >> @@ -2592,6 +2761,7 @@ static int qcom_nandc_probe(struct >> platform_device >> *pdev) >> if (IS_ERR(nandc->base)) >> return PTR_ERR(nandc->base); >> >> + nandc->base_phys = res->start; >> nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start); >> >> nandc->core_clk = devm_clk_get(dev, "core"); >> -- Abhishek Sahu