Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752651AbdGQV2k (ORCPT ); Mon, 17 Jul 2017 17:28:40 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:34959 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751607AbdGQV2f (ORCPT ); Mon, 17 Jul 2017 17:28:35 -0400 From: Enric Balletbo i Serra To: Thierry Reding , Lee Jones , Daniel Thompson , Jingoo Han , Bartlomiej Zolnierkiewicz , Rob Herring , Pavel Machek , Richard Purdie , Jacek Anaszewski , Heiko Stuebner Cc: linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, groeck@chromium.org, linux-rockchip@lists.infradead.org Subject: [PATCH v3 4/5] ARM: dts: rockchip: set PWM delay backlight settings for Veyron. Date: Mon, 17 Jul 2017 23:28:10 +0200 Message-Id: <20170717212811.25374-4-enric.balletbo@collabora.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170717212811.25374-1-enric.balletbo@collabora.com> References: <20170717212811.25374-1-enric.balletbo@collabora.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1135 Lines: 32 For veyron the binding should provide both PWM timings, the delay between you enable the PWM and set the enable signal, and the delay between you disable the PWM signal and clear the enable signal. Update the binding accordingly, in this case the panels connected to the veyron boards have a symmetric power sequence, hence the same value is used. Signed-off-by: Enric Balletbo i Serra --- Changes since v2: - Use new names for proprieties. Changes since v1: - Add this new patch to fix current binding on veyron. arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index d752a31..4cef71f 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -96,7 +96,8 @@ pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 0>; - pwm-delay-us = <10000>; + post-pwm-on-delay-us = <10000>; + pwm-off-delay-us = <10000>; }; gpio-charger { -- 2.9.3