Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752481AbdGQV2b (ORCPT ); Mon, 17 Jul 2017 17:28:31 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:34939 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751383AbdGQV22 (ORCPT ); Mon, 17 Jul 2017 17:28:28 -0400 From: Enric Balletbo i Serra To: Thierry Reding , Lee Jones , Daniel Thompson , Jingoo Han , Bartlomiej Zolnierkiewicz , Rob Herring , Pavel Machek , Richard Purdie , Jacek Anaszewski , Heiko Stuebner Cc: linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, groeck@chromium.org, linux-rockchip@lists.infradead.org Subject: [PATCH v3 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties. Date: Mon, 17 Jul 2017 23:28:08 +0200 Message-Id: <20170717212811.25374-2-enric.balletbo@collabora.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20170717212811.25374-1-enric.balletbo@collabora.com> References: <20170717212811.25374-1-enric.balletbo@collabora.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1873 Lines: 43 Hardware needs a delay between setting an initial (non-zero) PWM and enabling the backlight using GPIO. The post-pwm-on-delay-us specifies this delay in micro seconds. Hardware also needs a delay between disabing the backlight using GPIO and setting PWM value to 0. The pwm-off-delay-us is this delay in micro seconds. Signed-off-by: Enric Balletbo i Serra --- Based on the original Huang Lin work. Changes since v2: - Use separate properties (Rob Herring) Changes since v1: - As suggested by Daniel Thompson - Do not assume power-on delay and power-off delay will be the same Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt index 764db86..810527c 100644 --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt @@ -17,6 +17,10 @@ Optional properties: "pwms" property (see PWM binding[0]) - enable-gpios: contains a single GPIO specifier for the GPIO which enables and disables the backlight (see GPIO binding[1]) + - post-pwm-on-delay-us: Delay in us between setting an initial (non-zero) PWM + and enabling the backlight using GPIO. + - pwm-off-delay-us: Delay in us between disabling the backlight using GPIO + and setting PWM value to 0. [0]: Documentation/devicetree/bindings/pwm/pwm.txt [1]: Documentation/devicetree/bindings/gpio/gpio.txt @@ -32,4 +36,6 @@ Example: power-supply = <&vdd_bl_reg>; enable-gpios = <&gpio 58 0>; + post-pwm-on-delay-us = <10000>; + pwm-off-delay-us = <10000>; }; -- 2.9.3