Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751546AbdGRMhh (ORCPT ); Tue, 18 Jul 2017 08:37:37 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:36134 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751482AbdGRMhV (ORCPT ); Tue, 18 Jul 2017 08:37:21 -0400 From: Fabrice Gasnier To: , CC: , , , , , , , , , , , , , Subject: [PATCH 2/3] dt-bindings: iio: adc: stm32: add optional min-sample-time Date: Tue, 18 Jul 2017 14:35:31 +0200 Message-ID: <1500381332-17086-3-git-send-email-fabrice.gasnier@st.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1500381332-17086-1-git-send-email-fabrice.gasnier@st.com> References: <1500381332-17086-1-git-send-email-fabrice.gasnier@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.50] X-ClientProxiedBy: SFHDAG3NODE2.st.com (10.75.127.8) To SFHDAG5NODE3.st.com (10.75.127.15) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-07-18_04:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1346 Lines: 30 STM32 ADC allows each channel to be sampled with a different sampling time. There's an application note that deals with this: 'How to get the best ADC accuracy in STM32...' It basically depends on analog input signal electrical properties (depends on board). Add optional 'min-sample-time' property so this can be tuned in dt. Signed-off-by: Fabrice Gasnier --- Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 8310073..9cd964b 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -74,6 +74,11 @@ Optional properties: * can be 6, 8, 10 or 12 on stm32f4 * can be 8, 10, 12, 14 or 16 on stm32h7 Default is maximum resolution if unset. +- min-sample-time: Minimum sampling time in nanoseconds. + Depending on hardware (board) e.g. high/low analog input source impedance, + fine tune of ADC sampling time may be recommended. + This can be either one value or an array that matches 'st,adc-channels' list, + to set sample time resp. for all channels, or independently for each channel. Example: adc: adc@40012000 { -- 1.9.1