Subject: Re: xircom card bus with 2.4.21 link trouble (was: xircom card bus
	with 2.4.20 link trouble)
From: Arnaud Ligot <spyroux@freegates.be>
To: LKML <linux-kernel@vger.kernel.org>
In-Reply-To: <1056101484.6724.18.camel@portable>
References: <1056101193.6728.14.camel@portable>
	 <1056101484.6724.18.camel@portable>
Content-Type: text/plain; charset=iso-8859-15
Message-Id: <1056102885.6727.21.camel@portable>
Mime-Version: 1.0
Date: 20 Jun 2003 11:54:45 +0200
Content-Transfer-Encoding: 8BIT
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2502
Lines: 77

against me ;-)

with a lot of tries... there are is a """solution"""
- put the card
- the led link blink
- you MUST define an IP with ifconfig
- the led link stop blinking !!!

is that a bug ?

thanks

Arnaud

Le ven 20/06/2003 ? 11:31, Arnaud Ligot a ?crit :
> /me auto slaps 
> 
> with the 2.4.20, it work but it don't work with 2.4.21.
> Sorry
> 
> Le ven 20/06/2003 ? 11:26, Arnaud Ligot a ?crit :
> > Hello,
> > 
> > Since I run the 2.4.21 kernel (+bootsplash patch), (I didn't try without
> > this patch but I think it is not the problem), my Xircom Cardbus don't
> > work any more! In fact, I put the card into the pcmcia slot, the pc
> > detect it, load the correct module (xirc2ps_cb), start eth1 but the led
> > link (both side) blinks.
> > I have try with a hub 10, a ethernet card 10 and an ethernet card
> > 10/100. I have so try 2 cables... but same problem.
> > I have try to impose the ethernet type of link mii-tool -A10BaseT-HD and
> > -F10BaseT-HD.
> > 
> > Thanks
> > 
> > Arnaud
> > 
> > extract of /var/messages (10mbps):
> > ------
> > Jun 20 08:34:49 portable kernel: cs: memory probe 0xa0000000-0xa0ffffff:
> > clean.
> > Jun 20 08:34:49 portable kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55
> > (dd9jn+kvh)
> > Jun 20 08:34:53 portable kernel: eth1: autonegotiation failed; using
> > 10mbs
> > Jun 20 08:34:53 portable kernel: eth1: MII selected
> > Jun 20 08:34:53 portable kernel: eth1: media 10BaseT, silicon revision 0
> > Jun 20 08:34:53 portable kernel: eth1: Xircom: port 0x300, irq 3, hwaddr
> > 00:80:C7:CC:1F:A
> > 2
> > Jun 20 08:34:54 portable kernel: eth1: autonegotiation failed; using
> > 10mbs
> > Jun 20 08:34:54 portable kernel: eth1: MII selected
> > Jun 20 08:34:54 portable kernel: eth1: media 10BaseT, silicon revision 0
> > Jun 20 08:34:59 portable kernel: eth1: autonegotiation failed; using
> > 10mbs
> > Jun 20 08:34:59 portable kernel: eth1: MII selected
> > ....
> > -----
> > 
> > short extract of /var/messages (100mbps):
> > -----
> > Jun 20 10:14:52 portable kernel: eth1: MII link partner: 05e1
> > Jun 20 10:14:52 portable kernel: eth1: MII selected
> > Jun 20 10:14:52 portable kernel: eth1: media 100BaseT, silicon revision
> > 5
> > -----
> > 
> > ----
-- 
Arnaud Ligot <spyroux@freegates.be>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/