Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262259AbTFTOOv (ORCPT ); Fri, 20 Jun 2003 10:14:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262284AbTFTOOv (ORCPT ); Fri, 20 Jun 2003 10:14:51 -0400 Received: from 211.187-201-80.adsl.skynet.be ([80.201.187.211]:59661 "EHLO obelix.village-gaulois") by vger.kernel.org with ESMTP id S262259AbTFTOOu convert rfc822-to-8bit (ORCPT ); Fri, 20 Jun 2003 10:14:50 -0400 Subject: Re: xircom card bus with 2.4.20 link trouble From: Arnaud Ligot To: Mike Dresser Cc: LKML In-Reply-To: References: Content-Type: text/plain; charset=iso-8859-15 Message-Id: <1056119306.6727.27.camel@portable> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.0 Date: 20 Jun 2003 16:28:27 +0200 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 988 Lines: 31 Le ven 20/06/2003 ? 16:11, Mike Dresser a ?crit : >> bla bla bla... > > Mine doesn't work either, I have a RBEM56G-100. > > Bought this off ebay for quite cheap to replace my REM56G-100. > > It detects it, etc etc, but never actually works. > > I put the REM56G-100 back in, insmod'd the driver, and back in business. > I have a CEM56-100 > I haven't tried a 2.5.x kernel, nor a 2.4.21(it's on my list of things to > do) the card works with 2.4.20 nice and works if you set an ip address with the 2.4.21 > I was using the xircom_cb driver though. The xircom_tulip_cb didn't work > either. I use the xirc2ps_cs module. I haven't force cardmgr to use so I think it's the good module for the card -- Arnaud Ligot - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/