Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753264AbdGSIoJ (ORCPT ); Wed, 19 Jul 2017 04:44:09 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:50264 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753162AbdGSIoF (ORCPT ); Wed, 19 Jul 2017 04:44:05 -0400 DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 7BA8F61265 Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=none smtp.mailfrom=varada@codeaurora.org From: Varadarajan Narayanan To: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com, svarbanov@mm-sol.com, kishon@ti.com, sboyd@codeaurora.org, vivek.gautam@codeaurora.org, fengguang.wu@intel.com, weiyongjun1@huawei.com, linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Varadarajan Narayanan Subject: [PATCH v2 1/8] dt-bindings: phy: qmp: Add output-clock-names Date: Wed, 19 Jul 2017 14:13:32 +0530 Message-Id: <1500453819-5223-2-git-send-email-varada@codeaurora.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1500453819-5223-1-git-send-email-varada@codeaurora.org> References: <1500453819-5223-1-git-send-email-varada@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1398 Lines: 33 The phy outputs a clock that will act as the parent for the phy's pipe clock. Add the name of this clock to the lane's DT node. Acked-by: Rob Herring Signed-off-by: Varadarajan Narayanan --- Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index e11c563..5d7a51f 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -60,6 +60,8 @@ Required properties for child node: one for each entry in clock-names. - clock-names: Must contain following for pcie and usb qmp phys: "pipe" for pipe clock specific to each lane. + - clock-output-names: Name of the phy clock that will be the parent for + the above pipe clock. - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. @@ -96,6 +98,7 @@ Example: clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation