Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263185AbTFTPfs (ORCPT ); Fri, 20 Jun 2003 11:35:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263187AbTFTPfs (ORCPT ); Fri, 20 Jun 2003 11:35:48 -0400 Received: from windsormachine.com ([206.48.122.28]:46599 "EHLO router.windsormachine.com") by vger.kernel.org with ESMTP id S263185AbTFTPfr (ORCPT ); Fri, 20 Jun 2003 11:35:47 -0400 Date: Fri, 20 Jun 2003 11:49:41 -0400 (EDT) From: Mike Dresser To: Arnaud Ligot cc: LKML Subject: Re: xircom card bus with 2.4.20 link trouble In-Reply-To: <1056119306.6727.27.camel@portable> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 782 Lines: 23 On 20 Jun 2003, Arnaud Ligot wrote: > the card works with 2.4.20 nice and works if you set an ip address with > the 2.4.21 7m33s+23m29s+6m58s+35s minutes and seconds later, I have a working 2.4.21 PCMCIA Card came up just fine, cardbus continues to refuse to work. Now if only DMA mode would work on the Opti 621 chipset inside this Omnibook 5500/5700 hybrid laptop :) Then it wouldn't take 38 minutes to compile. I knew I should have done this on the p4/2.53 that sits right next to it! But anyways, that's the way it goes Mike - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/