Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751448AbdGUKsc (ORCPT ); Fri, 21 Jul 2017 06:48:32 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:49960 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750737AbdGUKsa (ORCPT ); Fri, 21 Jul 2017 06:48:30 -0400 From: Enric Balletbo i Serra To: Thierry Reding , Lee Jones , Daniel Thompson , Jingoo Han , Bartlomiej Zolnierkiewicz , Rob Herring , Pavel Machek , Richard Purdie , Jacek Anaszewski , Heiko Stuebner Cc: linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, groeck@chromium.org, linux-rockchip@lists.infradead.org Subject: [PATCH v4 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle. Date: Fri, 21 Jul 2017 12:48:09 +0200 Message-Id: <20170721104813.5389-1-enric.balletbo@collabora.com> X-Mailer: git-send-email 2.9.3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1709 Lines: 61 Before this patch the enable signal was set before the PWM signal and vice-versa on power off. This sequence is wrong, at least, it is on the different panels datasheets that I checked, so I inverted the sequence to follow the specs. For reference the following panels have the mentioned sequence: - N133HSE-EA1 (Innolux) - N116BGE (Innolux) - N156BGE-L21 (Innolux) - B101EAN0 (Auo) - B101AW03 (Auo) - LTN101NT05 (Samsung) - CLAA101WA01A (Chunghwa) Signed-off-by: Enric Balletbo i Serra --- Changes since v3: - List the part numbers for the panel checked (Daniel Thompson) Changes since v2: - Add this as a separate patch (Thierry Reding) Changes since v1: - None drivers/video/backlight/pwm_bl.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 002f1ce..909a686 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -54,10 +54,11 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) if (err < 0) dev_err(pb->dev, "failed to enable power supply\n"); + pwm_enable(pb->pwm); + if (pb->enable_gpio) gpiod_set_value_cansleep(pb->enable_gpio, 1); - pwm_enable(pb->pwm); pb->enabled = true; } @@ -66,12 +67,12 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb) if (!pb->enabled) return; - pwm_config(pb->pwm, 0, pb->period); - pwm_disable(pb->pwm); - if (pb->enable_gpio) gpiod_set_value_cansleep(pb->enable_gpio, 0); + pwm_config(pb->pwm, 0, pb->period); + pwm_disable(pb->pwm); + regulator_disable(pb->power_supply); pb->enabled = false; } -- 2.9.3