Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753957AbdGULWB (ORCPT ); Fri, 21 Jul 2017 07:22:01 -0400 Received: from mx.socionext.com ([202.248.49.38]:7812 "EHLO mx.socionext.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753111AbdGULV7 (ORCPT ); Fri, 21 Jul 2017 07:21:59 -0400 From: Kunihiko Hayashi To: rui.zhang@intel.com, edubezval@gmail.com Cc: linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, yamada.masahiro@socionext.com, masami.hiramatsu@linaro.org, jaswinder.singh@linaro.org, Kunihiko Hayashi Subject: [PATCH v5 0/2] add UniPhier thermal support Date: Fri, 21 Jul 2017 20:21:43 +0900 Message-Id: <1500636105-11520-1-git-send-email-hayashi.kunihiko@socionext.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1673 Lines: 42 This series adds support for CPU temperature monitor modules implemented on UniPhier LD20 and PXs2 SoCs. This driver supports temperature monitoring and alert function on the module. Changes in v4: - fix warnings from sparse by replacing u32 with __be32 Changes in v3: - remove TMOD_MASK and use TMOD_WIDTH representing the bit width of TMOD Changes in v2: - add nsleep after starting and stopping PVT - replace temperature calculation with sign_extend32() Changes in v1: - separate dts from this patchset as another patchset - remove 'reg' description on the dt-bindings document - fix the order of calling initialization functions - replace mask bits to use GENMASK - fix calculation of temperature because of not considering a negative value - use devm_request_threaded_irq() instead of devm_request_irq() and separate a thread function from the interrupt handler - add dependency to Kconfig - set 120C to CRITICAL_TEMP_LIMIT as maximum temperature - shrink each line of parameters to save the number of lines - improve some comments and copyright description Kunihiko Hayashi (2): dt-bindings: thermal: add binding documentation for UniPhier thermal monitor thermal: uniphier: add UniPhier thermal driver .../bindings/thermal/uniphier-thermal.txt | 64 ++++ drivers/thermal/Kconfig | 8 + drivers/thermal/Makefile | 1 + drivers/thermal/uniphier_thermal.c | 386 +++++++++++++++++++++ 4 files changed, 459 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/uniphier-thermal.txt create mode 100644 drivers/thermal/uniphier_thermal.c -- 2.7.4