Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755529AbdGWK3r (ORCPT ); Sun, 23 Jul 2017 06:29:47 -0400 Received: from hermes.aosc.io ([199.195.250.187]:59448 "EHLO hermes.aosc.io" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751641AbdGWK3p (ORCPT ); Sun, 23 Jul 2017 06:29:45 -0400 From: Icenowy Zheng To: Liam Girdwood , Mark Brown , Maxime Ripard , Chen-Yu Tsai Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-pm@vger.kernel.org, linux-sunxi@googlegroups.com, Ondrej Jirman , Icenowy Zheng Subject: [PATCH 10/10] ARM: dts: sun8i: Add SY8106A regulator to Orange Pi PC Date: Sun, 23 Jul 2017 18:27:49 +0800 Message-Id: <20170723102749.17323-11-icenowy@aosc.io> In-Reply-To: <20170723102749.17323-1-icenowy@aosc.io> References: <20170723102749.17323-1-icenowy@aosc.io> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1265 Lines: 53 From: Ondrej Jirman Add SY8106A regulator to r_i2c bus and enable the r_i2c bus on Orange Pi PC, then set the power supply of the ARM cores to this regulator, in order to enable DVFS. Signed-off-by: Ondrej Jirman [Icenowy: Enable DVFS in this patch, slight changes and change commit message] Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 998b60f8d295..d855f8b6254e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -98,6 +98,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_sy8106a>; +}; + &ehci0 { status = "okay"; }; @@ -160,6 +164,21 @@ }; }; +&r_i2c { + status = "okay"; + + reg_sy8106a: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <200>; + regulator-boot-on; + regulator-always-on; + }; +}; + &r_pio { leds_r_opc: led_pins@0 { pins = "PL10"; -- 2.13.0