Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932511AbdGXQNg (ORCPT ); Mon, 24 Jul 2017 12:13:36 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:15007 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932156AbdGXQMp (ORCPT ); Mon, 24 Jul 2017 12:12:45 -0400 From: Fabrice Gasnier To: , CC: , , , , , , , , , , , Subject: [PATCH v2 3/3] iio: adc: stm32: add optional st,min-sample-time-nsecs Date: Mon, 24 Jul 2017 18:10:40 +0200 Message-ID: <1500912640-23927-4-git-send-email-fabrice.gasnier@st.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1500912640-23927-1-git-send-email-fabrice.gasnier@st.com> References: <1500912640-23927-1-git-send-email-fabrice.gasnier@st.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.75.127.45] X-ClientProxiedBy: SFHDAG1NODE1.st.com (10.75.127.1) To SFHDAG5NODE3.st.com (10.75.127.15) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-07-24_11:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11609 Lines: 336 STM32 ADC allows each channel to be sampled with a different sampling time, by setting SMPR registers. Basically, value depends on local electrical properties. Selecting correct value for sampling time highly depends on analog source impedance. There is a manual that may help in this process: 'How to get the best ADC accuracy in STM32...' This patch allows to configure minimum sampling time via device tree, either for: - all channels at once: st,min-sample-time-nsecs = <10000>; - independently for each channel (must match "st,adc-channels" list): st,adc-channels = <0 1>; st,min-sample-time-nsecs = <5000 10000>; Signed-off-by: Fabrice Gasnier --- Changes in v2: - Use 'st,min-sample-time-nsecs' instead of 'min-sample-time'. - Add a comment on of_property_read_u32_index() use. --- drivers/iio/adc/stm32-adc.c | 140 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 136 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c index 5bfcc1f..6bc6028 100644 --- a/drivers/iio/adc/stm32-adc.c +++ b/drivers/iio/adc/stm32-adc.c @@ -83,6 +83,8 @@ #define STM32H7_ADC_IER 0x04 #define STM32H7_ADC_CR 0x08 #define STM32H7_ADC_CFGR 0x0C +#define STM32H7_ADC_SMPR1 0x14 +#define STM32H7_ADC_SMPR2 0x18 #define STM32H7_ADC_PCSEL 0x1C #define STM32H7_ADC_SQR1 0x30 #define STM32H7_ADC_SQR2 0x34 @@ -151,6 +153,7 @@ enum stm32h7_adc_dmngt { #define STM32H7_BOOST_CLKRATE 20000000UL #define STM32_ADC_MAX_SQ 16 /* SQ1..SQ16 */ +#define STM32_ADC_MAX_SMP 7 /* SMPx range is [0..7] */ #define STM32_ADC_TIMEOUT_US 100000 #define STM32_ADC_TIMEOUT (msecs_to_jiffies(STM32_ADC_TIMEOUT_US / 1000)) @@ -227,6 +230,8 @@ struct stm32_adc_regs { * @exten: trigger control register & bitfield * @extsel: trigger selection register & bitfield * @res: resolution selection register & bitfield + * @smpr: smpr1 & smpr2 registers offset array + * @smp_bits: smpr1 & smpr2 index and bitfields */ struct stm32_adc_regspec { const u32 dr; @@ -236,6 +241,8 @@ struct stm32_adc_regspec { const struct stm32_adc_regs exten; const struct stm32_adc_regs extsel; const struct stm32_adc_regs res; + const u32 smpr[2]; + const struct stm32_adc_regs *smp_bits; }; struct stm32_adc; @@ -251,6 +258,7 @@ struct stm32_adc_regspec { * @start_conv: routine to start conversions * @stop_conv: routine to stop conversions * @unprepare: optional unprepare routine (disable, power-down) + * @smp_cycles: programmable sampling time (ADC clock cycles) */ struct stm32_adc_cfg { const struct stm32_adc_regspec *regs; @@ -262,6 +270,7 @@ struct stm32_adc_cfg { void (*start_conv)(struct stm32_adc *, bool dma); void (*stop_conv)(struct stm32_adc *); void (*unprepare)(struct stm32_adc *); + const unsigned int *smp_cycles; }; /** @@ -283,6 +292,7 @@ struct stm32_adc_cfg { * @rx_dma_buf: dma rx buffer bus address * @rx_buf_sz: dma rx buffer size * @pcsel bitmask to preselect channels on some devices + * @smpr_val: sampling time settings (e.g. smpr1 / smpr2) * @cal: optional calibration data on some devices */ struct stm32_adc { @@ -303,6 +313,7 @@ struct stm32_adc { dma_addr_t rx_dma_buf; unsigned int rx_buf_sz; u32 pcsel; + u32 smpr_val[2]; struct stm32_adc_calib cal; }; @@ -431,6 +442,39 @@ struct stm32_adc_info { {}, /* sentinel */ }; +/** + * stm32f4_smp_bits[] - describe sampling time register index & bit fields + * Sorted so it can be indexed by channel number. + */ +static const struct stm32_adc_regs stm32f4_smp_bits[] = { + /* STM32F4_ADC_SMPR2: smpr[] index, mask, shift for SMP0 to SMP9 */ + { 1, GENMASK(2, 0), 0 }, + { 1, GENMASK(5, 3), 3 }, + { 1, GENMASK(8, 6), 6 }, + { 1, GENMASK(11, 9), 9 }, + { 1, GENMASK(14, 12), 12 }, + { 1, GENMASK(17, 15), 15 }, + { 1, GENMASK(20, 18), 18 }, + { 1, GENMASK(23, 21), 21 }, + { 1, GENMASK(26, 24), 24 }, + { 1, GENMASK(29, 27), 27 }, + /* STM32F4_ADC_SMPR1, smpr[] index, mask, shift for SMP10 to SMP18 */ + { 0, GENMASK(2, 0), 0 }, + { 0, GENMASK(5, 3), 3 }, + { 0, GENMASK(8, 6), 6 }, + { 0, GENMASK(11, 9), 9 }, + { 0, GENMASK(14, 12), 12 }, + { 0, GENMASK(17, 15), 15 }, + { 0, GENMASK(20, 18), 18 }, + { 0, GENMASK(23, 21), 21 }, + { 0, GENMASK(26, 24), 24 }, +}; + +/* STM32F4 programmable sampling time (ADC clock cycles) */ +static const unsigned int stm32f4_adc_smp_cycles[STM32_ADC_MAX_SMP + 1] = { + 3, 15, 28, 56, 84, 112, 144, 480, +}; + static const struct stm32_adc_regspec stm32f4_adc_regspec = { .dr = STM32F4_ADC_DR, .ier_eoc = { STM32F4_ADC_CR1, STM32F4_EOCIE }, @@ -440,6 +484,8 @@ struct stm32_adc_info { .extsel = { STM32F4_ADC_CR2, STM32F4_EXTSEL_MASK, STM32F4_EXTSEL_SHIFT }, .res = { STM32F4_ADC_CR1, STM32F4_RES_MASK, STM32F4_RES_SHIFT }, + .smpr = { STM32F4_ADC_SMPR1, STM32F4_ADC_SMPR2 }, + .smp_bits = stm32f4_smp_bits, }; static const struct stm32_adc_regs stm32h7_sq[STM32_ADC_MAX_SQ + 1] = { @@ -483,6 +529,40 @@ struct stm32_adc_info { {}, }; +/** + * stm32h7_smp_bits - describe sampling time register index & bit fields + * Sorted so it can be indexed by channel number. + */ +static const struct stm32_adc_regs stm32h7_smp_bits[] = { + /* STM32H7_ADC_SMPR1, smpr[] index, mask, shift for SMP0 to SMP9 */ + { 0, GENMASK(2, 0), 0 }, + { 0, GENMASK(5, 3), 3 }, + { 0, GENMASK(8, 6), 6 }, + { 0, GENMASK(11, 9), 9 }, + { 0, GENMASK(14, 12), 12 }, + { 0, GENMASK(17, 15), 15 }, + { 0, GENMASK(20, 18), 18 }, + { 0, GENMASK(23, 21), 21 }, + { 0, GENMASK(26, 24), 24 }, + { 0, GENMASK(29, 27), 27 }, + /* STM32H7_ADC_SMPR2, smpr[] index, mask, shift for SMP10 to SMP19 */ + { 1, GENMASK(2, 0), 0 }, + { 1, GENMASK(5, 3), 3 }, + { 1, GENMASK(8, 6), 6 }, + { 1, GENMASK(11, 9), 9 }, + { 1, GENMASK(14, 12), 12 }, + { 1, GENMASK(17, 15), 15 }, + { 1, GENMASK(20, 18), 18 }, + { 1, GENMASK(23, 21), 21 }, + { 1, GENMASK(26, 24), 24 }, + { 1, GENMASK(29, 27), 27 }, +}; + +/* STM32H7 programmable sampling time (ADC clock cycles, rounded down) */ +static const unsigned int stm32h7_adc_smp_cycles[STM32_ADC_MAX_SMP + 1] = { + 1, 2, 8, 16, 32, 64, 387, 810, +}; + static const struct stm32_adc_regspec stm32h7_adc_regspec = { .dr = STM32H7_ADC_DR, .ier_eoc = { STM32H7_ADC_IER, STM32H7_EOCIE }, @@ -492,6 +572,8 @@ struct stm32_adc_info { .extsel = { STM32H7_ADC_CFGR, STM32H7_EXTSEL_MASK, STM32H7_EXTSEL_SHIFT }, .res = { STM32H7_ADC_CFGR, STM32H7_RES_MASK, STM32H7_RES_SHIFT }, + .smpr = { STM32H7_ADC_SMPR1, STM32H7_ADC_SMPR2 }, + .smp_bits = stm32h7_smp_bits, }; /** @@ -933,6 +1015,7 @@ static void stm32h7_adc_unprepare(struct stm32_adc *adc) * @scan_mask: channels to be converted * * Conversion sequence : + * Apply sampling time settings for all channels. * Configure ADC scan sequence based on selected channels in scan_mask. * Add channels to SQR registers, from scan_mask LSB to MSB, then * program sequence len. @@ -946,6 +1029,10 @@ static int stm32_adc_conf_scan_seq(struct iio_dev *indio_dev, u32 val, bit; int i = 0; + /* Apply sampling time settings */ + stm32_adc_writel(adc, adc->cfg->regs->smpr[0], adc->smpr_val[0]); + stm32_adc_writel(adc, adc->cfg->regs->smpr[1], adc->smpr_val[1]); + for_each_set_bit(bit, scan_mask, indio_dev->masklength) { chan = indio_dev->channels + bit; /* @@ -1079,6 +1166,7 @@ static int stm32_adc_get_trig_pol(struct iio_dev *indio_dev, * @res: conversion result * * The function performs a single conversion on a given channel: + * - Apply sampling time settings * - Program sequencer with one channel (e.g. in SQ1 with len = 1) * - Use SW trigger * - Start conversion, then wait for interrupt completion. @@ -1103,6 +1191,10 @@ static int stm32_adc_single_conv(struct iio_dev *indio_dev, return ret; } + /* Apply sampling time settings */ + stm32_adc_writel(adc, regs->smpr[0], adc->smpr_val[0]); + stm32_adc_writel(adc, regs->smpr[1], adc->smpr_val[1]); + /* Program chan number in regular sequence (SQ1) */ val = stm32_adc_readl(adc, regs->sqr[1].reg); val &= ~regs->sqr[1].mask; @@ -1507,10 +1599,28 @@ static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev) return 0; } +static void stm32_adc_smpr_init(struct stm32_adc *adc, int channel, u32 smp_ns) +{ + const struct stm32_adc_regs *smpr = &adc->cfg->regs->smp_bits[channel]; + u32 period_ns, shift = smpr->shift, mask = smpr->mask; + unsigned int smp, r = smpr->reg; + + /* Determine sampling time (ADC clock cycles) */ + period_ns = NSEC_PER_SEC / adc->common->rate; + for (smp = 0; smp <= STM32_ADC_MAX_SMP; smp++) + if ((period_ns * adc->cfg->smp_cycles[smp]) >= smp_ns) + break; + if (smp > STM32_ADC_MAX_SMP) + smp = STM32_ADC_MAX_SMP; + + /* pre-build sampling time registers (e.g. smpr1, smpr2) */ + adc->smpr_val[r] = (adc->smpr_val[r] & ~mask) | (smp << shift); +} + static void stm32_adc_chan_init_one(struct iio_dev *indio_dev, struct iio_chan_spec *chan, const struct stm32_adc_chan_spec *channel, - int scan_index) + int scan_index, u32 smp) { struct stm32_adc *adc = iio_priv(indio_dev); @@ -1526,6 +1636,9 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev, chan->scan_type.storagebits = 16; chan->ext_info = stm32_adc_ext_info; + /* Prepare sampling time settings */ + stm32_adc_smpr_init(adc, chan->channel, smp); + /* pre-build selected channels mask */ adc->pcsel |= BIT(chan->channel); } @@ -1538,8 +1651,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev) struct property *prop; const __be32 *cur; struct iio_chan_spec *channels; - int scan_index = 0, num_channels; - u32 val; + int scan_index = 0, num_channels, ret; + u32 val, smp = 0; num_channels = of_property_count_u32_elems(node, "st,adc-channels"); if (num_channels < 0 || @@ -1548,6 +1661,13 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev) return num_channels < 0 ? num_channels : -EINVAL; } + /* Optional sample time is provided either for each, or all channels */ + ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs"); + if (ret > 1 && ret != num_channels) { + dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n"); + return -EINVAL; + } + channels = devm_kcalloc(&indio_dev->dev, num_channels, sizeof(struct iio_chan_spec), GFP_KERNEL); if (!channels) @@ -1558,9 +1678,19 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev) dev_err(&indio_dev->dev, "Invalid channel %d\n", val); return -EINVAL; } + + /* + * Using of_property_read_u32_index(), smp value will only be + * modified if valid u32 value can be decoded. This allows to + * get either no value, 1 shared value for all indexes, or one + * value per channel. + */ + of_property_read_u32_index(node, "st,min-sample-time-nsecs", + scan_index, &smp); + stm32_adc_chan_init_one(indio_dev, &channels[scan_index], &adc_info->channels[val], - scan_index); + scan_index, smp); scan_index++; } @@ -1755,6 +1885,7 @@ static int stm32_adc_remove(struct platform_device *pdev) .clk_required = true, .start_conv = stm32f4_adc_start_conv, .stop_conv = stm32f4_adc_stop_conv, + .smp_cycles = stm32f4_adc_smp_cycles, }; static const struct stm32_adc_cfg stm32h7_adc_cfg = { @@ -1766,6 +1897,7 @@ static int stm32_adc_remove(struct platform_device *pdev) .stop_conv = stm32h7_adc_stop_conv, .prepare = stm32h7_adc_prepare, .unprepare = stm32h7_adc_unprepare, + .smp_cycles = stm32h7_adc_smp_cycles, }; static const struct of_device_id stm32_adc_of_match[] = { -- 1.9.1