Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751127AbdGYKGW (ORCPT ); Tue, 25 Jul 2017 06:06:22 -0400 Received: from mx1.redhat.com ([209.132.183.28]:39664 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750790AbdGYKGT (ORCPT ); Tue, 25 Jul 2017 06:06:19 -0400 DMARC-Filter: OpenDMARC Filter v1.3.2 mx1.redhat.com 1D0EA883C7 Authentication-Results: ext-mx02.extmail.prod.ext.phx2.redhat.com; dmarc=none (p=none dis=none) header.from=redhat.com Authentication-Results: ext-mx02.extmail.prod.ext.phx2.redhat.com; spf=pass smtp.mailfrom=zkabelac@redhat.com Subject: Re: USB disk speed regression WD Elements - with bisect result 22547c4cc4fe20698a6a85a55b8788859134b8e4 To: Alan Stern Cc: LKML , dianders@chromium.org, linux@roeck-us.net, gregkh@linuxfoundation.org References: From: Zdenek Kabelac Organization: Red Hat Message-ID: <695fe58e-1e66-a8f5-4232-3b7beedf9e4d@redhat.com> Date: Tue, 25 Jul 2017 12:06:16 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.2.0 MIME-Version: 1.0 In-Reply-To: Content-Type: multipart/mixed; boundary="------------37CFF9BAD1824E9CE0AFABD6" Content-Language: en-US X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.16 (mx1.redhat.com [10.5.110.26]); Tue, 25 Jul 2017 10:06:19 +0000 (UTC) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 139174 Lines: 2314 This is a multi-part message in MIME format. --------------37CFF9BAD1824E9CE0AFABD6 Content-Type: text/plain; charset=iso-8859-2; format=flowed Content-Transfer-Encoding: 7bit Dne 24.7.2017 v 16:41 Alan Stern napsal(a): > On Mon, 24 Jul 2017, Zdenek Kabelac wrote: > >> Hi >> >> I've problem with my USB storage devices: WD Elements 1TB. >> (Bus 004 Device 002: ID 1058:10a8 Western Digital Technologies, Inc. Elements >> Portable (WDBUZG)) >> >> >> After kernel >4.9 when disk is attached via cable it has very low speed >> (less then 1MB/s). >> >> It can run at full speed (>22MB/s) when the Linux kernel is fully rebooted (so >> disk is attached during the reboot of Lenovo T61, C2D, Fedora Rawhide). >> >> However when >4.9 kernel is running and disk is just attached it's very slow. >> >> I've played a bisect game - and the clean result has been: >> >> 22547c4cc4fe20698a6a85a55b8788859134b8e4 >> >> When I just revert this patch with 4.13-rc1 - it's again running with full >> speed even when disk is attached (thus no reboot is needed for full speed). >> >> >> So while I've no idea what 22547c4cc4fe20698... is doing, it seems to have >> some unpleasant side-effect on regular USB devices. >> >> So what else is needed to get this properly working ? >> (assuming plain revert of 22547c4cc4fe20698 is unwanted). >> >> What more info can I provide to get this storage 'normally' usable without >> rebooting the machine. > > Please post the dmesg logs showing what happens when the disk is > first attached and operates slowly, and what happens when the disk is > attached following a reboot and operates normally. So I'm attaching kernel traces from kernel 4.8 & 4.12 from T61. Both are from full boot (all kernel: messages) In both cases - boot was with USB WD disk attached - then I've detached USB disk and reattached again. On 4.8 this had normal speed all the time On 4.12 after reattach -> slow speed. I should also add that on Lenovo T440s - there seems to be NO slowdown when this WD Element drive is attached it works normally all the time. So it could be probably related to USB chipset on T61 ?? For completeness I'm also attaching boot kernel trace from T440s where USB disk is just attached and works with normal speed. Zdenek --------------37CFF9BAD1824E9CE0AFABD6 Content-Type: application/x-troff-man; name="k4.8" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="k4.8" 07:54 Linux version 4.8.16-300.fc25.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Fri Jan 6 18:11:49 UTC 2017 07:54 Command line: BOOT_IMAGE=/vmlinuz-4.8.16-300.fc25.x86_64 root=/dev/sda2 ro selinux=0 kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0 systemd.log_level=info systemd.log_target=kmsg acpi_backlight=vendor log_buf_len=2M quiet 07:54 x86/fpu: Legacy x87 FPU detected. 07:54 x86/fpu: Using 'eager' FPU context switches. 07:54 e820: BIOS-provided physical RAM map: 07:54 BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable 07:54 BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved 07:54 BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved 07:54 BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable 07:54 BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data 07:54 BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS 07:54 BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved 07:54 BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved 07:54 BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved 07:54 BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved 07:54 BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved 07:54 BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved 07:54 BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 07:54 BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved 07:54 BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable 07:54 NX (Execute Disable) protection: active 07:54 SMBIOS 2.4 present. 07:54 e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000 07:54 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT 07:54 e820: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000 07:54 found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffffa31f400f68f0] 07:54 log_buf_len: 2097152 bytes 07:54 early log buf free: 258348(98%) 07:54 RAMDISK: [mem 0x36404000-0x371f9fff] 07:54 ACPI: Early table checksum verification disabled 07:54 ACPI: RSDP 0x00000000000F68C0 000024 (v02 LENOVO) 07:54 ACPI: XSDT 0x00000000BF6BB496 00009C (v01 LENOVO TP-7U 00002290 LTP 00000000) 07:54 ACPI: FACP 0x00000000BF6BB600 0000F4 (v03 LENOVO TP-7U 00002290 LNVO 00000001) 07:54 ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160422/tbfadt-624) 07:54 ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20160422/tbfadt-624) 07:54 ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20160422/tbfadt-658) 07:54 ACPI: DSDT 0x00000000BF6BBA1D 01003C (v01 LENOVO TP-7U 00002290 MSFT 03000000) 07:54 ACPI: FACS 0x00000000BF6E4000 000040 07:54 ACPI: FACS 0x00000000BF6E4000 000040 07:54 ACPI: SSDT 0x00000000BF6BB7B4 000269 (v01 LENOVO TP-7U 00002290 MSFT 03000000) 07:54 ACPI: ECDT 0x00000000BF6CBA59 000052 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 07:54 ACPI: TCPA 0x00000000BF6CBAAB 000032 (v02 LENOVO TP-7U 00002290 LNVO 00000001) 07:54 ACPI: APIC 0x00000000BF6CBADD 000068 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 07:54 ACPI: MCFG 0x00000000BF6CBB45 00003C (v01 LENOVO TP-7U 00002290 LNVO 00000001) 07:54 ACPI: HPET 0x00000000BF6CBB81 000038 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 07:54 ACPI: SLIC 0x00000000BF6CBBB9 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000) 07:54 ACPI: SLAC 0x00000000BF6CBDF0 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000) 07:54 ACPI: BOOT 0x00000000BF6CBF66 000028 (v01 LENOVO TP-7U 00002290 LTP 00000001) 07:54 ACPI: ASF! 0x00000000BF6CBF8E 000072 (v16 LENOVO TP-7U 00002290 PTL 00000001) 07:54 ACPI: SSDT 0x00000000BF6E26D9 00025F (v01 LENOVO TP-7U 00002290 INTL 20050513) 07:54 ACPI: SSDT 0x00000000BF6E2938 0000A6 (v01 LENOVO TP-7U 00002290 INTL 20050513) 07:54 ACPI: SSDT 0x00000000BF6E29DE 0004F7 (v01 LENOVO TP-7U 00002290 INTL 20050513) 07:54 ACPI: SSDT 0x00000000BF6E2ED5 0001D8 (v01 LENOVO TP-7U 00002290 INTL 20050513) 07:54 No NUMA configuration found 07:54 Faking a node at [mem 0x0000000000000000-0x000000013bffffff] 07:54 NODE_DATA(0) allocated [mem 0x13bde9000-0x13bdfffff] 07:54 Zone ranges: 07:54 DMA [mem 0x0000000000001000-0x0000000000ffffff] 07:54 DMA32 [mem 0x0000000001000000-0x00000000ffffffff] 07:54 Normal [mem 0x0000000100000000-0x000000013bffffff] 07:54 Device empty 07:54 Movable zone start for each node 07:54 Early memory node ranges 07:54 node 0: [mem 0x0000000000001000-0x000000000009cfff] 07:54 node 0: [mem 0x0000000000100000-0x00000000bf6affff] 07:54 node 0: [mem 0x0000000100000000-0x000000013bffffff] 07:54 Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff] 07:54 Reserving Intel graphics memory at 0x00000000bf800000-0x00000000bfffffff 07:54 ACPI: PM-Timer IO Port: 0x1008 07:54 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) 07:54 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 07:54 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 07:54 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 07:54 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 07:54 Using ACPI (MADT) for SMP configuration information 07:54 ACPI: HPET id: 0x8086a201 base: 0xfed00000 07:54 smpboot: Allowing 2 CPUs, 0 hotplug CPUs 07:54 PM: Registered nosave memory: [mem 0x00000000-0x00000fff] 07:54 PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] 07:54 PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] 07:54 PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] 07:54 PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] 07:54 PM: Registered nosave memory: [mem 0xbf6b0000-0xbf6cbfff] 07:54 PM: Registered nosave memory: [mem 0xbf6cc000-0xbf6fffff] 07:54 PM: Registered nosave memory: [mem 0xbf700000-0xbfffffff] 07:54 PM: Registered nosave memory: [mem 0xc0000000-0xefffffff] 07:54 PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] 07:54 PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] 07:54 PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] 07:54 PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] 07:54 PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff] 07:54 PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff] 07:54 PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] 07:54 PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] 07:54 PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] 07:54 PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] 07:54 PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] 07:54 PM: Registered nosave memory: [mem 0xff000000-0xffffffff] 07:54 e820: [mem 0xc0000000-0xefffffff] available for PCI devices 07:54 Booting paravirtualized kernel on bare hardware 07:54 clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns 07:54 setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 07:54 percpu: Embedded 36 pages/cpu @ffffa3207ba00000 s108760 r8192 d30504 u1048576 07:54 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013596 07:54 Policy zone: Normal 07:54 Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.16-300.fc25.x86_64 root=/dev/sda2 ro selinux=0 kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0 systemd.log_level=info systemd.log_target=kmsg acpi_backlight=vendor log_buf_len=2M quiet 07:54 PID hash table entries: 4096 (order: 3, 32768 bytes) 07:54 Memory: 3951208K/4118832K available (8227K kernel code, 1416K rwdata, 3340K rodata, 1608K init, 1520K bss, 167624K reserved, 0K cma-reserved) 07:54 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 07:54 Hierarchical RCU implementation. 07:54 #011Build-time adjustment of leaf fanout to 64. 07:54 #011RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2. 07:54 RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 07:54 NR_IRQS:65792 nr_irqs:440 16 07:54 #011Offload RCU callbacks from all CPUs 07:54 #011Offload RCU callbacks from CPUs: 0-1. 07:54 Console: colour VGA+ 80x25 07:54 console [tty0] enabled 07:54 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns 07:54 tsc: Fast TSC calibration failed 07:54 tsc: PIT calibration matches HPET. 1 loops 07:54 tsc: Detected 2192.744 MHz processor 07:54 Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.48 BogoMIPS (lpj=2192744) 07:54 pid_max: default: 32768 minimum: 301 07:54 ACPI: Core revision 20160422 07:54 ACPI: 6 ACPI AML tables successfully acquired and loaded 07:54 07:54 Security Framework initialized 07:54 Yama: becoming mindful. 07:54 SELinux: Disabled at boot. 07:54 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) 07:54 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) 07:54 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) 07:54 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) 07:54 CPU: Physical Processor ID: 0 07:54 CPU: Processor Core ID: 0 07:54 mce: CPU supports 6 MCE banks 07:54 CPU0: Thermal monitoring enabled (TM2) 07:54 process: using mwait in idle threads 07:54 Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 07:54 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 07:54 Freeing SMP alternatives memory: 32K (ffffffff9e0f6000 - ffffffff9e0fe000) 07:54 ftrace: allocating 30771 entries in 121 pages 07:54 smpboot: APIC(0) Converting physical 0 to logical package 0 07:54 smpboot: Max logical packages: 1 07:54 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 07:54 smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (family: 0x6, model: 0xf, stepping: 0xa) 07:54 Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. 07:54 core: PEBS disabled due to CPU errata 07:54 ... version: 2 07:54 ... bit width: 40 07:54 ... generic registers: 2 07:54 ... value mask: 000000ffffffffff 07:54 ... max period: 000000007fffffff 07:54 ... fixed-purpose events: 3 07:54 ... event mask: 0000000700000003 07:54 x86: Booting SMP configuration: 07:54 .... node #0, CPUs: #1 07:54 TSC synchronization [CPU#0 -> CPU#1]: 07:54 Measured 399641 cycles TSC warp between CPUs, turning off TSC clock. 07:54 tsc: Marking TSC unstable due to check_tsc_sync_source failed 07:54 x86: Booted up 1 node, 2 CPUs 07:54 smpboot: Total of 2 processors activated (8774.26 BogoMIPS) 07:54 NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. 07:54 devtmpfs: initialized 07:54 x86/mm: Memory block size: 128MB 07:54 PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes) 07:54 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns 07:54 atomic64_test: passed for x86-64 platform with CX8 and with SSE 07:54 pinctrl core: initialized pinctrl subsystem 07:54 RTC time: 18:07:54, date: 07/24/17 07:54 NET: Registered protocol family 16 07:54 cpuidle: using governor menu 07:54 Simple Boot Flag at 0x35 set to 0x1 07:54 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it 07:54 ACPI: bus type PCI registered 07:54 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 07:54 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) 07:54 PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 07:54 pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override. 07:54 PCI: Using configuration type 1 for base access 07:54 HugeTLB registered 2 MB page size, pre-allocated 0 pages 07:54 ACPI: Added _OSI(Module Device) 07:54 ACPI: Added _OSI(Processor Device) 07:54 ACPI: Added _OSI(3.0 _SCP Extensions) 07:54 ACPI: Added _OSI(Processor Aggregator Device) 07:54 ACPI : EC: EC description table is found, configuring boot EC 07:54 ACPI : EC: EC started 07:54 ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored 07:54 ACPI: Dynamic OEM Table Load: 07:54 ACPI: SSDT 0xFFFFA320765AE400 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) 07:54 ACPI: Dynamic OEM Table Load: 07:54 ACPI: SSDT 0xFFFFA320765E9000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) 07:54 ACPI: Dynamic OEM Table Load: 07:54 ACPI: SSDT 0xFFFFA32076599700 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) 07:54 ACPI: Dynamic OEM Table Load: 07:54 ACPI: SSDT 0xFFFFA320765A0F00 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) 07:54 ACPI : EC: EC stopped 07:54 ACPI : EC: EC started 07:54 ACPI: Interpreter enabled 07:54 ACPI: (supports S0 S3 S4 S5) 07:54 ACPI: Using IOAPIC for interrupt routing 07:54 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 07:54 ACPI: Power Resource [PUBS] (on) 07:54 acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) 07:54 acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) 07:54 acpi IBM0079:00: ACPI dock station (docks/bays count: 3) 07:54 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) 07:54 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) 07:54 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) 07:54 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) 07:54 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) 07:54 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) 07:54 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) 07:54 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) 07:54 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 07:54 acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] 07:54 acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] 07:54 acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration 07:54 acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge 07:54 PCI host bridge to bus 0000:00 07:54 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] 07:54 pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] 07:54 pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 07:54 pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] 07:54 pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] 07:54 pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] 07:54 pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] 07:54 pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] 07:54 pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] 07:54 pci_bus 0000:00: root bus resource [bus 00-ff] 07:54 pci 0000:00:19.0: System wakeup disabled by ACPI 07:54 pci 0000:00:1a.0: System wakeup disabled by ACPI 07:54 pci 0000:00:1a.1: System wakeup disabled by ACPI 07:54 pci 0000:00:1a.7: System wakeup disabled by ACPI 07:54 pci 0000:00:1b.0: System wakeup disabled by ACPI 07:54 pci 0000:00:1c.0: System wakeup disabled by ACPI 07:54 pci 0000:00:1c.1: System wakeup disabled by ACPI 07:54 pci 0000:00:1c.2: System wakeup disabled by ACPI 07:54 pci 0000:00:1d.0: System wakeup disabled by ACPI 07:54 pci 0000:00:1d.1: System wakeup disabled by ACPI 07:54 pci 0000:00:1d.2: System wakeup disabled by ACPI 07:54 pci 0000:00:1d.7: System wakeup disabled by ACPI 07:54 pci 0000:00:1e.0: System wakeup disabled by ACPI 07:54 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO 07:54 pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO 07:54 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) 07:54 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) 07:54 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) 07:54 pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] 07:54 pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] 07:54 pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] 07:54 pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] 07:54 pci 0000:00:1c.0: PCI bridge to [bus 02] 07:54 pci 0000:00:1c.1: PCI bridge to [bus 03] 07:54 pci 0000:00:1c.2: PCI bridge to [bus 04] 07:54 pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function) 07:54 pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller 07:54 pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) 07:54 ACPI: Enabled 3 GPEs in block 00 to 1F 07:54 ACPI : EC: EC stopped 07:54 ACPI : EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 07:54 ACPI : EC: EC started 07:54 vgaarb: setting as boot device: PCI:0000:00:02.0 07:54 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none 07:54 vgaarb: loaded 07:54 vgaarb: bridge control possible 0000:00:02.0 07:54 SCSI subsystem initialized 07:54 ACPI: bus type USB registered 07:54 usbcore: registered new interface driver usbfs 07:54 usbcore: registered new interface driver hub 07:54 usbcore: registered new device driver usb 07:54 PCI: Using ACPI for IRQ routing 07:54 NetLabel: Initializing 07:54 NetLabel: domain hash size = 128 07:54 NetLabel: protocols = UNLABELED CIPSOv4 07:54 NetLabel: unlabeled traffic allowed by default 07:54 HPET: 3 timers in total, 0 timers will be used for per-cpu timer 07:54 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 07:54 hpet0: 3 comparators, 64-bit 14.318180 MHz counter 07:54 clocksource: Switched to clocksource hpet 07:54 VFS: Disk quotas dquot_6.6.0 07:54 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 07:54 pnp: PnP ACPI init 07:54 system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved 07:54 system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved 07:54 system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved 07:54 system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved 07:54 system 00:00: [mem 0x000cc000-0x000cffff] has been reserved 07:54 system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved 07:54 system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved 07:54 system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved 07:54 system 00:00: [mem 0x000ec000-0x000effff] could not be reserved 07:54 system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved 07:54 system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved 07:54 system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved 07:54 system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved 07:54 system 00:01: [io 0x164e-0x164f] has been reserved 07:54 system 00:01: [io 0x1000-0x107f] has been reserved 07:54 system 00:01: [io 0x1180-0x11bf] has been reserved 07:54 system 00:01: [io 0x0800-0x080f] has been reserved 07:54 system 00:01: [io 0x15e0-0x15ef] has been reserved 07:54 system 00:01: [io 0x1600-0x165f] could not be reserved 07:54 system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved 07:54 system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved 07:54 system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved 07:54 system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved 07:54 system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved 07:54 system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved 07:54 pnp: PnP ACPI: found 6 devices 07:54 clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 07:54 pci 0000:00:1c.0: PCI bridge to [bus 02] 07:54 pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] 07:54 pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] 07:54 pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] 07:54 pci 0000:00:1c.1: PCI bridge to [bus 03] 07:54 pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] 07:54 pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf6fffff] 07:54 pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] 07:54 pci 0000:00:1c.2: PCI bridge to [bus 04] 07:54 pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] 07:54 pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] 07:54 pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] 07:54 pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] 07:54 pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] 07:54 pci 0000:15:00.0: BAR 13: assigned [io 0x6000-0x60ff] 07:54 pci 0000:15:00.0: BAR 14: assigned [io 0x6400-0x64ff] 07:54 pci 0000:15:00.0: CardBus bridge to [bus 16-17] 07:54 pci 0000:15:00.0: bridge window [io 0x6000-0x60ff] 07:54 pci 0000:15:00.0: bridge window [io 0x6400-0x64ff] 07:54 pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref] 07:54 pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff] 07:54 pci 0000:00:1e.0: PCI bridge to [bus 15-18] 07:54 pci 0000:00:1e.0: bridge window [io 0x6000-0x9fff] 07:54 pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] 07:54 pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] 07:55 NET: Registered protocol family 2 07:55 TCP established hash table entries: 32768 (order: 6, 262144 bytes) 07:55 TCP bind hash table entries: 32768 (order: 7, 524288 bytes) 07:55 TCP: Hash tables configured (established 32768 bind 32768) 07:55 UDP hash table entries: 2048 (order: 4, 65536 bytes) 07:55 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) 07:55 NET: Registered protocol family 1 07:55 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 07:55 Unpacking initramfs... 07:55 Freeing initrd memory: 14296K (ffffa31f76404000 - ffffa31f771fa000) 07:55 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 07:55 software IO TLB [mem 0xbb6b0000-0xbf6b0000] (64MB) mapped at [ffffa31ffb6b0000-ffffa31fff6affff] 07:55 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f9b6c8a2a8, max_idle_ns: 440795274438 ns 07:55 futex hash table entries: 512 (order: 3, 32768 bytes) 07:55 Initialise system trusted keyrings 07:55 workingset: timestamp_bits=37 max_order=20 bucket_order=0 07:55 zbud: loaded 07:55 NET: Registered protocol family 38 07:55 Key type asymmetric registered 07:55 Asymmetric key parser 'x509' registered 07:55 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) 07:55 io scheduler noop registered 07:55 io scheduler deadline registered 07:55 io scheduler cfq registered (default) 07:55 pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt 07:55 pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt 07:55 pci 0000:03:00.0: Signaling PME through PCIe PME interrupt 07:55 pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt 07:55 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 07:55 pciehp 0000:00:1c.0:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 07:55 pciehp 0000:00:1c.1:pcie004: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 07:55 pciehp 0000:00:1c.2:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 07:55 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 07:55 ACPI: AC Adapter [AC] (on-line) 07:55 input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 07:55 ACPI: Lid Switch [LID] 07:55 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 07:55 ACPI: Sleep Button [SLPB] 07:55 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 07:55 ACPI: Power Button [PWRF] 07:55 thermal LNXTHERM:00: registered as thermal_zone0 07:55 ACPI: Thermal Zone [THM0] (54 C) 07:55 thermal LNXTHERM:01: registered as thermal_zone1 07:55 ACPI: Thermal Zone [THM1] (53 C) 07:55 GHES: HEST is not enabled! 07:55 Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 07:55 random: fast init done 07:55 Non-volatile memory driver v1.3 07:55 Linux agpgart interface v0.103 07:55 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode 07:55 ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 07:55 scsi host0: ahci 07:55 scsi host1: ahci 07:55 scsi host2: ahci 07:55 ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 27 07:55 ata2: DUMMY 07:55 ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 27 07:55 scsi host3: ata_piix 07:55 scsi host4: ata_piix 07:55 ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 07:55 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 07:55 libphy: Fixed MDIO Bus: probed 07:55 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 07:55 ehci-pci: EHCI PCI platform driver 07:55 ehci-pci 0000:00:1a.7: EHCI Host Controller 07:55 ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 07:55 ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00 07:55 ACPI: Battery Slot [BAT0] (battery present) 07:55 ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 07:55 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 07:55 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 07:55 usb usb1: Product: EHCI Host Controller 07:55 usb usb1: Manufacturer: Linux 4.8.16-300.fc25.x86_64 ehci_hcd 07:55 usb usb1: SerialNumber: 0000:00:1a.7 07:55 hub 1-0:1.0: USB hub found 07:55 hub 1-0:1.0: 4 ports detected 07:55 ehci-pci 0000:00:1d.7: EHCI Host Controller 07:55 ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 07:55 ehci-pci 0000:00:1d.7: debug port 1 07:55 ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000 07:55 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 07:55 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 07:55 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 07:55 usb usb2: Product: EHCI Host Controller 07:55 usb usb2: Manufacturer: Linux 4.8.16-300.fc25.x86_64 ehci_hcd 07:55 usb usb2: SerialNumber: 0000:00:1d.7 07:55 hub 2-0:1.0: USB hub found 07:55 hub 2-0:1.0: 6 ports detected 07:55 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 07:55 ohci-pci: OHCI PCI platform driver 07:55 uhci_hcd: USB Universal Host Controller Interface driver 07:55 uhci_hcd 0000:00:1a.0: UHCI Host Controller 07:55 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 07:55 uhci_hcd 0000:00:1a.0: detected 2 ports 07:55 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 07:55 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 07:55 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 07:55 usb usb3: Product: UHCI Host Controller 07:55 usb usb3: Manufacturer: Linux 4.8.16-300.fc25.x86_64 uhci_hcd 07:55 usb usb3: SerialNumber: 0000:00:1a.0 07:55 hub 3-0:1.0: USB hub found 07:55 hub 3-0:1.0: 2 ports detected 07:55 uhci_hcd 0000:00:1a.1: UHCI Host Controller 07:55 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 07:55 uhci_hcd 0000:00:1a.1: detected 2 ports 07:55 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 07:55 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 07:55 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 07:55 usb usb4: Product: UHCI Host Controller 07:55 usb usb4: Manufacturer: Linux 4.8.16-300.fc25.x86_64 uhci_hcd 07:55 usb usb4: SerialNumber: 0000:00:1a.1 07:55 hub 4-0:1.0: USB hub found 07:55 hub 4-0:1.0: 2 ports detected 07:55 uhci_hcd 0000:00:1d.0: UHCI Host Controller 07:55 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 07:55 uhci_hcd 0000:00:1d.0: detected 2 ports 07:55 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 07:55 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 07:55 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 07:55 usb usb5: Product: UHCI Host Controller 07:55 usb usb5: Manufacturer: Linux 4.8.16-300.fc25.x86_64 uhci_hcd 07:55 usb usb5: SerialNumber: 0000:00:1d.0 07:55 hub 5-0:1.0: USB hub found 07:55 hub 5-0:1.0: 2 ports detected 07:55 uhci_hcd 0000:00:1d.1: UHCI Host Controller 07:55 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 07:55 uhci_hcd 0000:00:1d.1: detected 2 ports 07:55 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 07:55 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 07:55 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 07:55 usb usb6: Product: UHCI Host Controller 07:55 usb usb6: Manufacturer: Linux 4.8.16-300.fc25.x86_64 uhci_hcd 07:55 usb usb6: SerialNumber: 0000:00:1d.1 07:55 hub 6-0:1.0: USB hub found 07:55 hub 6-0:1.0: 2 ports detected 07:55 uhci_hcd 0000:00:1d.2: UHCI Host Controller 07:55 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 07:55 uhci_hcd 0000:00:1d.2: detected 2 ports 07:55 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 07:55 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 07:55 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 07:55 usb usb7: Product: UHCI Host Controller 07:55 usb usb7: Manufacturer: Linux 4.8.16-300.fc25.x86_64 uhci_hcd 07:55 usb usb7: SerialNumber: 0000:00:1d.2 07:55 hub 7-0:1.0: USB hub found 07:55 hub 7-0:1.0: 2 ports detected 07:55 usbcore: registered new interface driver usbserial 07:55 usbcore: registered new interface driver usbserial_generic 07:55 usbserial: USB Serial support registered for generic 07:55 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 07:55 serio: i8042 KBD port at 0x60,0x64 irq 1 07:55 serio: i8042 AUX port at 0x60,0x64 irq 12 07:55 mousedev: PS/2 mouse device common for all mice 07:55 rtc_cmos 00:02: RTC can wake from S4 07:55 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 07:55 rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs 07:55 device-mapper: uevent: version 1.0.3 07:55 device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 07:55 hidraw: raw HID events driver (C) Jiri Kosina 07:55 usbcore: registered new interface driver usbhid 07:55 usbhid: USB HID core driver 07:55 drop_monitor: Initializing network drop monitor service 07:55 ip_tables: (C) 2000-2006 Netfilter Core Team 07:55 Initializing XFRM netlink socket 07:55 NET: Registered protocol family 10 07:55 mip6: Mobile IPv6 07:55 NET: Registered protocol family 17 07:55 microcode: sig=0x6fa, pf=0x80, revision=0x95 07:55 microcode: Microcode Update Driver: v2.01 , Peter Oruba 07:55 registered taskstats version 1 07:55 Loading compiled-in X.509 certificates 07:55 alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) 07:55 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 07:55 Loaded X.509 cert 'Fedora kernel signing key: 88a5905f6334d476a89fd4f78259218471473318' 07:55 zswap: loaded using pool lzo/zbud 07:55 Key type big_key registered 07:55 Magic number: 9:783:140 07:55 acpi device:11: hash matches 07:55 rtc_cmos 00:02: setting system clock to 2017-07-24 18:07:54 UTC (1500919674) 07:55 ata4.00: ATAPI: MATSHITADVD-RAM UJ-842 z, RC01, max UDMA/33 07:55 ata4.00: configured for UDMA/33 07:55 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 07:55 ata3: SATA link down (SStatus 0 SControl 300) 07:55 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 07:55 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 07:55 ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 07:55 ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA 07:55 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 07:55 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 07:55 ata1.00: configured for UDMA/133 07:55 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 07:55 sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) 07:55 sd 0:0:0:0: Attached scsi generic sg0 type 0 07:55 sd 0:0:0:0: [sda] Write Protect is off 07:55 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 07:55 sda: sda1 sda2 sda3 sda4 < sda5 sda6 > 07:55 scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 z RC01 PQ: 0 ANSI: 5 07:55 sd 0:0:0:0: [sda] Attached SCSI disk 07:55 usb 2-2: new high-speed USB device number 2 using ehci-pci 07:55 sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray 07:55 cdrom: Uniform CD-ROM driver Revision: 3.20 07:55 sr 3:0:0:0: Attached scsi generic sg1 type 5 07:55 Freeing unused kernel memory: 1608K (ffffffff9df64000 - ffffffff9e0f6000) 07:55 Write protecting the kernel read-only data: 14336k 07:55 Freeing unused kernel memory: 1996K (ffffa3205680d000 - ffffa32056a00000) 07:55 Freeing unused kernel memory: 756K (ffffa32056d43000 - ffffa32056e00000) 07:55 x86/mm: Checked W+X mappings: passed, no W+X pages found. 07:55 kernel profiling enabled schedstats, disable via kernel.sched_schedstats. 07:55 usb 2-2: New USB device found, idVendor=1058, idProduct=10a8 07:55 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 07:55 usb 2-2: Product: Elements 10A8 07:55 usb 2-2: Manufacturer: Western Digital 07:55 usb 2-2: SerialNumber: 5758333145373354504C3031 07:55 usb 3-2: new full-speed USB device number 2 using uhci_hcd 07:55 usb-storage 2-2:1.0: USB Mass Storage device detected 07:55 scsi host5: usb-storage 2-2:1.0 07:55 usbcore: registered new interface driver usb-storage 07:55 usbcore: registered new interface driver uas 07:55 usb 3-2: New USB device found, idVendor=0483, idProduct=2016 07:55 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 07:55 usb 3-2: Product: Biometric Coprocessor 07:55 usb 3-2: Manufacturer: STMicroelectronics 07:55 [drm] Initialized drm 1.1.0 20060810 07:55 pci 0000:00:1e.0: enabling device (0005 -> 0007) 07:55 yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] 07:55 psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0/0x0, board id: 0, fw id: 496542 07:55 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 07:55 sdhci: Secure Digital Host Controller Interface driver 07:55 sdhci: Copyright(c) Pierre Ossman 07:55 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 07:55 yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 07:55 yenta_cardbus 0000:15:00.0: Socket status: 30000006 07:55 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x6000-0x9fff] 07:55 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff] 07:55 pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff: 07:55 excluding 0xf8300000-0xf86cffff 07:55 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref] 07:55 pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff: 07:55 excluding 0xf4000000-0xf7ffffff 07:55 sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) 07:55 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. 07:55 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. 07:55 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. 07:55 mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA 07:55 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: 07:55 excluding 0xc0000-0xcffff 0xe0000-0xfffff 07:55 pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: 07:55 excluding 0xa0000000-0xa0ffffff 07:55 pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: 07:55 excluding 0x60000000-0x60ffffff 07:55 EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) 07:55 pci 0000:00:00.0: Intel 965GM Chipset 07:55 pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable 07:55 pci 0000:00:00.0: detected 8192K stolen memory 07:55 [drm] Memory usable by graphics device = 512M 07:55 [drm] Replacing VGA console driver 07:55 Console: switching to colour dummy device 80x25 07:55 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 07:55 [drm] Driver supports precise vblank timestamp query. 07:55 vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem 07:55 [drm] RC6 disabled, disabling runtime PM support 07:55 [drm] initialized overlay support 07:55 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) 07:55 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 07:55 [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0 07:56 fbcon: inteldrmfb (fb0) is primary device 07:56 mmc0: new high speed SDHC card at address aaaa 07:56 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 07:56 scsi 5:0:0:0: Direct-Access WD Elements 10A8 1042 PQ: 0 ANSI: 6 07:56 sd 5:0:0:0: Attached scsi generic sg2 type 0 07:56 sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) 07:56 sd 5:0:0:0: [sdb] Write Protect is off 07:56 sd 5:0:0:0: [sdb] No Caching mode page found 07:56 sd 5:0:0:0: [sdb] Assuming drive cache: write through 07:56 sdb: sdb1 sdb2 07:56 sd 5:0:0:0: [sdb] Attached SCSI disk 07:56 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 07:56 Console: switching to colour frame buffer device 210x65 07:56 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device 07:56 systemd: 73 output lines suppressed due to ratelimiting 07:56 EXT4-fs (sda2): re-mounted. Opts: data=ordered 07:56 loop: module loaded 07:56 RPC: Registered named UNIX socket transport module. 07:56 RPC: Registered udp transport module. 07:56 RPC: Registered tcp transport module. 07:56 RPC: Registered tcp NFSv4.1 backchannel transport module. 07:57 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 07:57 FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED 07:57 wmi: Mapper loaded 07:57 pps_core: LinuxPPS API ver. 1 registered 07:57 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 07:57 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 07:57 PTP clock support registered 07:57 thinkpad_acpi: ThinkPad ACPI Extras v0.25 07:57 thinkpad_acpi: http://ibm-acpi.sf.net/ 07:57 thinkpad_acpi: ThinkPad BIOS 7LETC9WW (2.29 ), EC 7KHT24WW-1.08 07:57 thinkpad_acpi: Lenovo ThinkPad T61, model 6464CTO 07:57 ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20160422/utaddress-255) 07:57 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 07:57 mmcblk0: mmc0:aaaa SL32G 29.7 GiB 07:57 ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20160422/utaddress-255) 07:57 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 07:57 mmcblk0: p1 07:57 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: 07:57 ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20160422/utaddress-255) 07:57 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 07:57 lpc_ich: Resource conflict(s) found affecting gpio_ich 07:57 excluding 0xc0000-0xcffff 0xe0000-0xfffff 07:57 r592: driver successfully loaded 07:57 thinkpad_acpi: ACPI backlight control delay disabled 07:57 thinkpad_acpi: radio switch found; radios are enabled 07:57 pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: 07:57 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k 07:57 e1000e: Copyright(c) 1999 - 2015 Intel Corporation. 07:57 thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked 07:57 excluding 0xa0000000-0xa0ffffff 07:57 thinkpad_acpi: Standard ACPI backlight interface not available, thinkpad_acpi native brightness control enabled 07:57 pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: 07:57 i801_smbus 0000:00:1f.3: SMBus using PCI interrupt 07:57 input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 07:57 excluding 0x60000000-0x60ffffff 07:57 random: crng init done 07:57 e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode 07:57 ppdev: user-space parallel port driver 07:57 iTCO_vendor_support: vendor-support=0 07:57 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 07:57 iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) 07:57 iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 07:57 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds 07:57 iwl3945: Copyright(c) 2003-2011 Intel Corporation 07:57 iwl3945 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control 07:57 iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels 07:57 iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG 07:57 e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:14:4a:e2 07:57 e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection 07:58 e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF 07:58 intel_powerclamp: No package C-state available 07:58 snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac 07:58 intel_powerclamp: No package C-state available 07:58 snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker 07:58 snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) 07:58 snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) 07:58 snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 07:58 snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0 07:58 snd_hda_codec_analog hdaudioC0D0: inputs: 07:58 snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15 07:58 snd_hda_codec_analog hdaudioC0D0: Mic=0x14 07:58 snd_hda_codec_analog hdaudioC0D0: Dock Mic=0x1c 07:58 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 07:58 input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 07:58 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 07:58 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered 07:58 EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered,user_xattr 07:59 ip6_tables: (C) 2000-2006 Netfilter Core Team 07:59 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 07:59 Ebtables v2.0 registered 08:00 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 08:00 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 08:00 iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 08:00 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 08:00 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 08:00 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 08:00 tun: Universal TUN/TAP device driver, 1.6 08:00 tun: (C) 1999-2004 Max Krasnyansky 08:00 virbr0: port 1(virbr0-nic) entered blocking state 08:00 virbr0: port 1(virbr0-nic) entered disabled state 08:00 device virbr0-nic entered promiscuous mode 08:00 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 08:00 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 08:00 virbr0: port 1(virbr0-nic) entered blocking state 08:00 virbr0: port 1(virbr0-nic) entered listening state 08:00 virbr0: port 1(virbr0-nic) entered disabled state 08:04 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 08:07 wlan0: associated 08:07 IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 08:08 NFSD: starting 90-second grace period (net ffffffff9def7240) 08:18 usb 2-2: USB disconnect, device number 2 08:25 usb 2-2: new high-speed USB device number 3 using ehci-pci 08:26 usb 2-2: new high-speed USB device number 4 using ehci-pci 08:26 usb 2-2: New USB device found, idVendor=1058, idProduct=10a8 08:26 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 08:26 usb 2-2: Product: Elements 10A8 08:26 usb 2-2: Manufacturer: Western Digital 08:26 usb 2-2: SerialNumber: 5758333145373354504C3031 08:26 usb-storage 2-2:1.0: USB Mass Storage device detected 08:26 scsi host5: usb-storage 2-2:1.0 08:27 scsi 5:0:0:0: Direct-Access WD Elements 10A8 1042 PQ: 0 ANSI: 6 08:27 sd 5:0:0:0: Attached scsi generic sg2 type 0 08:27 sd 5:0:0:0: [sdb] Spinning up disk... 08:29 .. 08:31 ..ready 08:31 sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) 08:31 sd 5:0:0:0: [sdb] Write Protect is off 08:31 sd 5:0:0:0: [sdb] No Caching mode page found 08:31 sd 5:0:0:0: [sdb] Assuming drive cache: write through 08:31 sdb: sdb1 sdb2 08:31 sd 5:0:0:0: [sdb] Attached SCSI disk 08:46 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) 08:55 nfsd: last server has exited, flushing export cache --------------37CFF9BAD1824E9CE0AFABD6 Content-Type: text/plain; charset=UTF-8; name="k4.12" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="k4.12" 06:18 Linux version 4.12.0-1.fc27.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.1.1 20170526 (Red Hat 7.1.1-2) (GCC) ) #1 SMP Mon Jul 3 15:45:36 UTC 2017 06:18 Command line: BOOT_IMAGE=/vmlinuz-4.12.0-1.fc27.x86_64 root=/dev/sda2 ro selinux=0 kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0 systemd.log_level=info systemd.log_target=kmsg acpi_backlight=vendor log_buf_len=2M quiet 06:18 x86/fpu: x87 FPU will use FXSAVE 06:18 e820: BIOS-provided physical RAM map: 06:18 BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable 06:18 BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved 06:18 BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved 06:18 BIOS-e820: [mem 0x0000000000100000-0x00000000bf6affff] usable 06:18 BIOS-e820: [mem 0x00000000bf6b0000-0x00000000bf6cbfff] ACPI data 06:18 BIOS-e820: [mem 0x00000000bf6cc000-0x00000000bf6fffff] ACPI NVS 06:18 BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved 06:18 BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved 06:18 BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved 06:18 BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved 06:18 BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved 06:18 BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved 06:18 BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 06:18 BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved 06:18 BIOS-e820: [mem 0x0000000100000000-0x000000013bffffff] usable 06:18 NX (Execute Disable) protection: active 06:18 SMBIOS 2.4 present. 06:18 DMI: LENOVO 6464CTO/6464CTO, BIOS 7LETC9WW (2.29 ) 03/18/2011 06:18 tsc: Fast TSC calibration failed 06:18 tsc: Using PIT calibration value 06:18 e820: last_pfn = 0x13c000 max_arch_pfn = 0x400000000 06:18 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT 06:18 e820: last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000 06:18 found SMP MP-table at [mem 0x000f68f0-0x000f68ff] mapped at [ffff8919400f68f0] 06:18 log_buf_len: 2097152 bytes 06:18 early log buf free: 258320(98%) 06:18 RAMDISK: [mem 0x3634d000-0x3719efff] 06:18 ACPI: Early table checksum verification disabled 06:18 ACPI: RSDP 0x00000000000F68C0 000024 (v02 LENOVO) 06:18 ACPI: XSDT 0x00000000BF6BB496 00009C (v01 LENOVO TP-7U 00002290 LTP 00000000) 06:18 ACPI: FACP 0x00000000BF6BB600 0000F4 (v03 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-603) 06:18 ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20170303/tbfadt-658) 06:18 ACPI: DSDT 0x00000000BF6BBA1D 01003C (v01 LENOVO TP-7U 00002290 MSFT 03000000) 06:18 ACPI: FACS 0x00000000BF6E4000 000040 06:18 ACPI: FACS 0x00000000BF6E4000 000040 06:18 ACPI: SSDT 0x00000000BF6BB7B4 000269 (v01 LENOVO TP-7U 00002290 MSFT 03000000) 06:18 ACPI: ECDT 0x00000000BF6CBA59 000052 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: TCPA 0x00000000BF6CBAAB 000032 (v02 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: APIC 0x00000000BF6CBADD 000068 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: MCFG 0x00000000BF6CBB45 00003C (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: HPET 0x00000000BF6CBB81 000038 (v01 LENOVO TP-7U 00002290 LNVO 00000001) 06:18 ACPI: SLIC 0x00000000BF6CBBB9 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000) 06:18 ACPI: SLAC 0x00000000BF6CBDF0 000176 (v01 LENOVO TP-7U 00002290 LTP 00000000) 06:18 ACPI: BOOT 0x00000000BF6CBF66 000028 (v01 LENOVO TP-7U 00002290 LTP 00000001) 06:18 ACPI: ASF! 0x00000000BF6CBF8E 000072 (v16 LENOVO TP-7U 00002290 PTL 00000001) 06:18 ACPI: SSDT 0x00000000BF6E26D9 00025F (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 ACPI: SSDT 0x00000000BF6E2938 0000A6 (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 ACPI: SSDT 0x00000000BF6E29DE 0004F7 (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 ACPI: SSDT 0x00000000BF6E2ED5 0001D8 (v01 LENOVO TP-7U 00002290 INTL 20050513) 06:18 No NUMA configuration found 06:18 Faking a node at [mem 0x0000000000000000-0x000000013bffffff] 06:18 NODE_DATA(0) allocated [mem 0x13bdd5000-0x13bdfffff] 06:18 Zone ranges: 06:18 DMA [mem 0x0000000000001000-0x0000000000ffffff] 06:18 DMA32 [mem 0x0000000001000000-0x00000000ffffffff] 06:18 Normal [mem 0x0000000100000000-0x000000013bffffff] 06:18 Device empty 06:18 Movable zone start for each node 06:18 Early memory node ranges 06:18 node 0: [mem 0x0000000000001000-0x000000000009cfff] 06:18 node 0: [mem 0x0000000000100000-0x00000000bf6affff] 06:18 node 0: [mem 0x0000000100000000-0x000000013bffffff] 06:18 Initmem setup node 0 [mem 0x0000000000001000-0x000000013bffffff] 06:18 Reserving Intel graphics memory at 0x00000000bf800000-0x00000000bfffffff 06:18 ACPI: PM-Timer IO Port: 0x1008 06:18 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) 06:18 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 06:18 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 06:18 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 06:18 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 06:18 Using ACPI (MADT) for SMP configuration information 06:18 ACPI: HPET id: 0x8086a201 base: 0xfed00000 06:18 smpboot: Allowing 2 CPUs, 0 hotplug CPUs 06:18 PM: Registered nosave memory: [mem 0x00000000-0x00000fff] 06:18 PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] 06:18 PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] 06:18 PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] 06:18 PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] 06:18 PM: Registered nosave memory: [mem 0xbf6b0000-0xbf6cbfff] 06:18 PM: Registered nosave memory: [mem 0xbf6cc000-0xbf6fffff] 06:18 PM: Registered nosave memory: [mem 0xbf700000-0xbfffffff] 06:18 PM: Registered nosave memory: [mem 0xc0000000-0xefffffff] 06:18 PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] 06:18 PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff] 06:18 PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] 06:18 PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff] 06:18 PM: Registered nosave memory: [mem 0xfed00000-0xfed13fff] 06:18 PM: Registered nosave memory: [mem 0xfed14000-0xfed19fff] 06:18 PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] 06:18 PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff] 06:18 PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff] 06:18 PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] 06:18 PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] 06:18 PM: Registered nosave memory: [mem 0xff000000-0xffffffff] 06:18 e820: [mem 0xc0000000-0xefffffff] available for PCI devices 06:18 Booting paravirtualized kernel on bare hardware 06:18 clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns 06:18 setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 06:18 percpu: Embedded 37 pages/cpu @ffff891a7ba00000 s111640 r8192 d31720 u1048576 06:18 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013596 06:18 Policy zone: Normal 06:18 Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-1.fc27.x86_64 root=/dev/sda2 ro selinux=0 kmemleak=off lockdep.prove_locking=0 lockdep.lock_stat=0 systemd.log_level=info systemd.log_target=kmsg acpi_backlight=vendor log_buf_len=2M quiet 06:18 PID hash table entries: 4096 (order: 3, 32768 bytes) 06:18 Memory: 3948948K/4118832K available (8693K kernel code, 2407K rwdata, 3692K rodata, 2164K init, 1980K bss, 169884K reserved, 0K cma-reserved) 06:18 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 06:18 ftrace: allocating 34435 entries in 135 pages 06:18 06:18 ********************************************************** 06:18 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** 06:18 ** ** 06:18 ** trace_printk() being used. Allocating extra memory. ** 06:18 ** ** 06:18 ** This means that this is a DEBUG kernel and it is ** 06:18 ** unsafe for production use. ** 06:18 ** ** 06:18 ** If you see this message and you are not debugging ** 06:18 ** the kernel, report this immediately to your vendor! ** 06:18 ** ** 06:18 ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** 06:18 ********************************************************** 06:18 Hierarchical RCU implementation. 06:18 #011RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. 06:18 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 06:18 NR_IRQS:524544 nr_irqs:440 16 06:18 #011Offload RCU callbacks from all CPUs 06:18 #011Offload RCU callbacks from CPUs: 0-1. 06:18 Console: colour VGA+ 80x25 06:18 console [tty0] enabled 06:18 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns 06:18 tsc: Fast TSC calibration using PIT 06:18 tsc: Detected 2194.450 MHz processor 06:18 Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.90 BogoMIPS (lpj=2194450) 06:18 pid_max: default: 32768 minimum: 301 06:18 ACPI: Core revision 20170303 06:18 ACPI: 6 ACPI AML tables successfully acquired and loaded 06:18 Security Framework initialized 06:18 Yama: becoming mindful. 06:18 SELinux: Disabled at boot. 06:18 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) 06:18 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) 06:18 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) 06:18 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) 06:18 CPU: Physical Processor ID: 0 06:18 CPU: Processor Core ID: 0 06:18 mce: CPU supports 6 MCE banks 06:18 CPU0: Thermal monitoring enabled (TM2) 06:18 process: using mwait in idle threads 06:18 Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 06:18 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 06:18 Freeing SMP alternatives memory: 32K 06:18 smpboot: Max logical packages: 1 06:18 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 06:18 smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (family: 0x6, model: 0xf, stepping: 0xa) 06:18 Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. 06:18 core: PEBS disabled due to CPU errata 06:18 ... version: 2 06:18 ... bit width: 40 06:18 ... generic registers: 2 06:18 ... value mask: 000000ffffffffff 06:18 ... max period: 000000007fffffff 06:18 ... fixed-purpose events: 3 06:18 ... event mask: 0000000700000003 06:18 NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. 06:18 smp: Bringing up secondary CPUs ... 06:18 x86: Booting SMP configuration: 06:18 .... node #0, CPUs: #1 06:18 TSC synchronization [CPU#0 -> CPU#1]: 06:18 Measured 399465 cycles TSC warp between CPUs, turning off TSC clock. 06:18 tsc: Marking TSC unstable due to check_tsc_sync_source failed 06:18 smp: Brought up 1 node, 2 CPUs 06:18 smpboot: Total of 2 processors activated (8777.65 BogoMIPS) 06:18 devtmpfs: initialized 06:18 x86/mm: Memory block size: 128MB 06:18 PM: Registering ACPI NVS region [mem 0xbf6cc000-0xbf6fffff] (212992 bytes) 06:18 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns 06:18 futex hash table entries: 512 (order: 3, 32768 bytes) 06:18 pinctrl core: initialized pinctrl subsystem 06:18 RTC time: 18:06:17, date: 07/24/17 06:18 NET: Registered protocol family 16 06:18 cpuidle: using governor menu 06:18 PCCT header not found. 06:18 Simple Boot Flag at 0x35 set to 0x1 06:18 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it 06:18 ACPI: bus type PCI registered 06:18 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 06:18 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) 06:18 PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 06:18 pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override. 06:18 PCI: Using configuration type 1 for base access 06:18 HugeTLB registered 2 MB page size, pre-allocated 0 pages 06:18 ACPI: Added _OSI(Module Device) 06:18 ACPI: Added _OSI(Processor Device) 06:18 ACPI: Added _OSI(3.0 _SCP Extensions) 06:18 ACPI: Added _OSI(Processor Aggregator Device) 06:18 ACPI : EC: EC started 06:18 ACPI : EC: interrupt blocked 06:18 ACPI: \: Used as first EC 06:18 ACPI: \: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 06:18 ACPI: \: Used as boot ECDT EC to handle transactions 06:18 ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A76063000 0002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A77254000 00085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A7605CF00 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) 06:18 ACPI: Dynamic OEM Table Load: 06:18 ACPI: SSDT 0xFFFF891A760779C0 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) 06:18 ACPI : EC: EC stopped 06:18 ACPI : EC: EC started 06:18 ACPI : EC: interrupt blocked 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions 06:18 ACPI: Interpreter enabled 06:18 ACPI: (supports S0 S3 S4 S5) 06:18 ACPI: Using IOAPIC for interrupt routing 06:18 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 06:18 ACPI: Power Resource [PUBS] (on) 06:18 acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) 06:18 acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) 06:18 acpi IBM0079:00: ACPI dock station (docks/bays count: 3) 06:18 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) 06:18 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) 06:18 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 06:18 acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] 06:18 acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] 06:18 acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration 06:18 acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge 06:18 PCI host bridge to bus 0000:00 06:18 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] 06:18 pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] 06:18 pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] 06:18 pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] 06:18 pci_bus 0000:00: root bus resource [bus 00-ff] 06:18 pci 0000:00:19.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1a.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1a.1: System wakeup disabled by ACPI 06:18 pci 0000:00:1a.7: System wakeup disabled by ACPI 06:18 pci 0000:00:1b.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1c.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1c.1: System wakeup disabled by ACPI 06:18 pci 0000:00:1c.2: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.1: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.2: System wakeup disabled by ACPI 06:18 pci 0000:00:1d.7: System wakeup disabled by ACPI 06:18 pci 0000:00:1e.0: System wakeup disabled by ACPI 06:18 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO 06:18 pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO 06:18 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) 06:18 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) 06:18 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] 06:18 pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] 06:18 pci 0000:00:1c.0: PCI bridge to [bus 02] 06:18 pci 0000:00:1c.1: PCI bridge to [bus 03] 06:18 pci 0000:00:1c.2: PCI bridge to [bus 04] 06:18 pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function) 06:18 pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller 06:18 pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) 06:18 ACPI: Enabled 3 GPEs in block 00 to 1F 06:18 ACPI : EC: interrupt unblocked 06:18 ACPI : EC: event unblocked 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x12, EC_CMD/EC_SC=0x66, EC_DATA=0x62 06:18 ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events 06:18 pci 0000:00:02.0: vgaarb: setting as boot VGA device 06:18 pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none 06:18 pci 0000:00:02.0: vgaarb: bridge control possible 06:18 vgaarb: loaded 06:18 SCSI subsystem initialized 06:18 ACPI: bus type USB registered 06:18 usbcore: registered new interface driver usbfs 06:18 usbcore: registered new interface driver hub 06:18 usbcore: registered new device driver usb 06:18 EDAC MC: Ver: 3.0.0 06:18 PCI: Using ACPI for IRQ routing 06:18 NetLabel: Initializing 06:18 NetLabel: domain hash size = 128 06:18 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO 06:18 NetLabel: unlabeled traffic allowed by default 06:18 HPET: 3 timers in total, 0 timers will be used for per-cpu timer 06:18 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 06:18 hpet0: 3 comparators, 64-bit 14.318180 MHz counter 06:18 clocksource: Switched to clocksource hpet 06:18 VFS: Disk quotas dquot_6.6.0 06:18 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 06:18 pnp: PnP ACPI init 06:18 system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved 06:18 system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved 06:18 system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved 06:18 system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved 06:18 system 00:00: [mem 0x000cc000-0x000cffff] has been reserved 06:18 system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved 06:18 system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved 06:18 system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved 06:18 system 00:00: [mem 0x000ec000-0x000effff] could not be reserved 06:18 system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved 06:18 system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved 06:18 system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved 06:18 system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved 06:18 system 00:01: [io 0x164e-0x164f] has been reserved 06:18 system 00:01: [io 0x1000-0x107f] has been reserved 06:18 system 00:01: [io 0x1180-0x11bf] has been reserved 06:18 system 00:01: [io 0x0800-0x080f] has been reserved 06:18 system 00:01: [io 0x15e0-0x15ef] has been reserved 06:18 system 00:01: [io 0x1600-0x165f] could not be reserved 06:18 system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved 06:18 system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved 06:18 system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved 06:18 system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved 06:18 system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved 06:18 system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved 06:18 pnp: PnP ACPI: found 6 devices 06:18 clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 06:18 pci 0000:00:1c.0: PCI bridge to [bus 02] 06:18 pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] 06:18 pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfdffffff] 06:18 pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf80fffff 64bit pref] 06:18 pci 0000:00:1c.1: PCI bridge to [bus 03] 06:18 pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] 06:18 pci 0000:00:1c.1: bridge window [mem 0xdc100000-0xdf6fffff] 06:18 pci 0000:00:1c.1: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref] 06:18 pci 0000:00:1c.2: PCI bridge to [bus 04] 06:18 pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] 06:18 pci 0000:00:1c.2: bridge window [mem 0xd8000000-0xd9ffffff] 06:18 pci 0000:00:1c.2: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref] 06:18 pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref] 06:18 pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] 06:18 pci 0000:15:00.0: BAR 13: assigned [io 0x6000-0x60ff] 06:18 pci 0000:15:00.0: BAR 14: assigned [io 0x6400-0x64ff] 06:18 pci 0000:15:00.0: CardBus bridge to [bus 16-17] 06:18 pci 0000:15:00.0: bridge window [io 0x6000-0x60ff] 06:18 pci 0000:15:00.0: bridge window [io 0x6400-0x64ff] 06:18 pci 0000:15:00.0: bridge window [mem 0xf4000000-0xf7ffffff pref] 06:18 pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff] 06:18 pci 0000:00:1e.0: PCI bridge to [bus 15-18] 06:18 pci 0000:00:1e.0: bridge window [io 0x6000-0x9fff] 06:18 pci 0000:00:1e.0: bridge window [mem 0xf8300000-0xfbffffff] 06:18 pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref] 06:18 NET: Registered protocol family 2 06:18 TCP established hash table entries: 32768 (order: 6, 262144 bytes) 06:18 TCP bind hash table entries: 32768 (order: 7, 524288 bytes) 06:18 TCP: Hash tables configured (established 32768 bind 32768) 06:18 UDP hash table entries: 2048 (order: 4, 65536 bytes) 06:18 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) 06:18 NET: Registered protocol family 1 06:18 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 06:18 Unpacking initramfs... 06:18 Freeing initrd memory: 14664K 06:18 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 06:18 software IO TLB [mem 0xbb6b0000-0xbf6b0000] (64MB) mapped at [ffff8919fb6b0000-ffff8919ff6affff] 06:18 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa1b8037fd, max_idle_ns: 440795241812 ns 06:18 Initialise system trusted keyrings 06:18 Key type blacklist registered 06:18 workingset: timestamp_bits=36 max_order=20 bucket_order=0 06:18 zbud: loaded 06:18 NET: Registered protocol family 38 06:18 Key type asymmetric registered 06:18 Asymmetric key parser 'x509' registered 06:18 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 06:18 io scheduler noop registered 06:18 io scheduler deadline registered 06:18 io scheduler cfq registered (default) 06:18 io scheduler mq-deadline registered 06:18 atomic64_test: passed for x86-64 platform with CX8 and with SSE 06:18 pcieport 0000:00:1c.0: Signaling PME with IRQ 24 06:18 pcieport 0000:00:1c.1: Signaling PME with IRQ 25 06:18 pcieport 0000:00:1c.2: Signaling PME with IRQ 26 06:18 pciehp 0000:00:1c.0:pcie004: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 06:18 pciehp 0000:00:1c.1:pcie004: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 06:18 pciehp 0000:00:1c.2:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ 06:18 ACPI: AC Adapter [AC] (on-line) 06:18 input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 06:18 ACPI: Lid Switch [LID] 06:18 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 06:18 ACPI: Sleep Button [SLPB] 06:18 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 06:18 ACPI: Power Button [PWRF] 06:18 (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 06:18 thermal LNXTHERM:00: registered as thermal_zone0 06:18 ACPI: Thermal Zone [THM0] (54 C) 06:18 thermal LNXTHERM:01: registered as thermal_zone1 06:18 ACPI: Thermal Zone [THM1] (51 C) 06:18 GHES: HEST is not enabled! 06:18 Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 06:18 Non-volatile memory driver v1.3 06:18 Linux agpgart interface v0.103 06:18 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode 06:18 ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 06:18 scsi host0: ahci 06:18 scsi host1: ahci 06:18 scsi host2: ahci 06:18 ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 27 06:18 ata2: DUMMY 06:18 ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 27 06:18 random: fast init done 06:18 scsi host3: ata_piix 06:18 scsi host4: ata_piix 06:18 ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 06:18 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 06:18 libphy: Fixed MDIO Bus: probed 06:18 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 06:18 ehci-pci: EHCI PCI platform driver 06:18 ehci-pci 0000:00:1a.7: EHCI Host Controller 06:18 ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 06:19 ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe226c00 06:19 ACPI: Battery Slot [BAT0] (battery present) 06:19 ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 06:19 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 06:19 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb1: Product: EHCI Host Controller 06:19 usb usb1: Manufacturer: Linux 4.12.0-1.fc27.x86_64 ehci_hcd 06:19 usb usb1: SerialNumber: 0000:00:1a.7 06:19 hub 1-0:1.0: USB hub found 06:19 hub 1-0:1.0: 4 ports detected 06:19 ehci-pci 0000:00:1d.7: EHCI Host Controller 06:19 ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 06:19 ehci-pci 0000:00:1d.7: debug port 1 06:19 ehci-pci 0000:00:1d.7: irq 19, io mem 0xfe227000 06:19 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 06:19 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 06:19 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb2: Product: EHCI Host Controller 06:19 usb usb2: Manufacturer: Linux 4.12.0-1.fc27.x86_64 ehci_hcd 06:19 usb usb2: SerialNumber: 0000:00:1d.7 06:19 hub 2-0:1.0: USB hub found 06:19 hub 2-0:1.0: 6 ports detected 06:19 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 06:19 ohci-pci: OHCI PCI platform driver 06:19 uhci_hcd: USB Universal Host Controller Interface driver 06:19 uhci_hcd 0000:00:1a.0: UHCI Host Controller 06:19 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 06:19 uhci_hcd 0000:00:1a.0: detected 2 ports 06:19 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 06:19 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb3: Product: UHCI Host Controller 06:19 usb usb3: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb3: SerialNumber: 0000:00:1a.0 06:19 hub 3-0:1.0: USB hub found 06:19 hub 3-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1a.1: UHCI Host Controller 06:19 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 06:19 uhci_hcd 0000:00:1a.1: detected 2 ports 06:19 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 06:19 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb4: Product: UHCI Host Controller 06:19 usb usb4: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb4: SerialNumber: 0000:00:1a.1 06:19 hub 4-0:1.0: USB hub found 06:19 hub 4-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1d.0: UHCI Host Controller 06:19 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 06:19 uhci_hcd 0000:00:1d.0: detected 2 ports 06:19 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 06:19 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb5: Product: UHCI Host Controller 06:19 usb usb5: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb5: SerialNumber: 0000:00:1d.0 06:19 hub 5-0:1.0: USB hub found 06:19 hub 5-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1d.1: UHCI Host Controller 06:19 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 06:19 uhci_hcd 0000:00:1d.1: detected 2 ports 06:19 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 06:19 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb6: Product: UHCI Host Controller 06:19 usb usb6: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb6: SerialNumber: 0000:00:1d.1 06:19 hub 6-0:1.0: USB hub found 06:19 hub 6-0:1.0: 2 ports detected 06:19 uhci_hcd 0000:00:1d.2: UHCI Host Controller 06:19 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 06:19 uhci_hcd 0000:00:1d.2: detected 2 ports 06:19 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 06:19 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 06:19 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 06:19 usb usb7: Product: UHCI Host Controller 06:19 usb usb7: Manufacturer: Linux 4.12.0-1.fc27.x86_64 uhci_hcd 06:19 usb usb7: SerialNumber: 0000:00:1d.2 06:19 hub 7-0:1.0: USB hub found 06:19 hub 7-0:1.0: 2 ports detected 06:19 usbcore: registered new interface driver usbserial 06:19 usbcore: registered new interface driver usbserial_generic 06:19 usbserial: USB Serial support registered for generic 06:19 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 06:19 serio: i8042 KBD port at 0x60,0x64 irq 1 06:19 serio: i8042 AUX port at 0x60,0x64 irq 12 06:19 mousedev: PS/2 mouse device common for all mice 06:19 rtc_cmos 00:02: RTC can wake from S4 06:19 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 06:19 rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs 06:19 device-mapper: uevent: version 1.0.3 06:19 device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 06:19 hidraw: raw HID events driver (C) Jiri Kosina 06:19 usbcore: registered new interface driver usbhid 06:19 usbhid: USB HID core driver 06:19 drop_monitor: Initializing network drop monitor service 06:19 ip_tables: (C) 2000-2006 Netfilter Core Team 06:19 Initializing XFRM netlink socket 06:19 NET: Registered protocol family 10 06:19 Segment Routing with IPv6 06:19 mip6: Mobile IPv6 06:19 NET: Registered protocol family 17 06:19 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 06:19 RAS: Correctable Errors collector initialized. 06:19 microcode: sig=0x6fa, pf=0x80, revision=0x95 06:19 microcode: Microcode Update Driver: v2.2. 06:19 registered taskstats version 1 06:19 Loading compiled-in X.509 certificates 06:19 alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) 06:19 Loaded X.509 cert 'Fedora kernel signing key: afce39acf6b4e14fc753ae848b4302f3a65b72e0' 06:19 zswap: loaded using pool lzo/zbud 06:19 Key type big_key registered 06:19 Key type encrypted registered 06:19 Magic number: 9:783:140 06:19 acpi device:11: hash matches 06:19 rtc_cmos 00:02: setting system clock to 2017-07-24 18:06:18 UTC (1500919578) 06:19 ata4.00: ATAPI: MATSHITADVD-RAM UJ-842 z, RC01, max UDMA/33 06:19 ata4.00: configured for UDMA/33 06:19 ata3: SATA link down (SStatus 0 SControl 300) 06:19 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 06:19 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 06:19 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 06:19 ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133 06:19 ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA 06:19 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 06:19 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 06:19 ata1.00: configured for UDMA/133 06:19 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5 06:19 sd 0:0:0:0: Attached scsi generic sg0 type 0 06:19 sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) 06:19 sd 0:0:0:0: [sda] Write Protect is off 06:19 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 06:19 sda: sda1 sda2 sda3 sda4 < sda5 sda6 > 06:19 scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-842 z RC01 PQ: 0 ANSI: 5 06:19 sd 0:0:0:0: [sda] Attached SCSI disk 06:19 usb 2-2: new high-speed USB device number 2 using ehci-pci 06:19 sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray 06:19 cdrom: Uniform CD-ROM driver Revision: 3.20 06:19 sr 3:0:0:0: Attached scsi generic sg1 type 5 06:19 Freeing unused kernel memory: 2164K 06:19 Write protecting the kernel read-only data: 14336k 06:19 Freeing unused kernel memory: 1532K 06:19 Freeing unused kernel memory: 404K 06:19 x86/mm: Checked W+X mappings: passed, no W+X pages found. 06:19 rodata_test: all tests were successful 06:19[1]: Starting Create list of required static device nodes for the current kernel... 06:19 kernel profiling enabled schedstats, disable via kernel.sched_schedstats. 06:19 usb 2-2: New USB device found, idVendor=1058, idProduct=10a8 06:19 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 06:19 usb 2-2: Product: Elements 10A8 06:19 usb 2-2: Manufacturer: Western Digital 06:19 usb 2-2: SerialNumber: 5758333145373354504C3031 06:19 usb-storage 2-2:1.0: USB Mass Storage device detected 06:19 scsi host5: usb-storage 2-2:1.0 06:19 usbcore: registered new interface driver usb-storage 06:19 usbcore: registered new interface driver uas 06:19 usb 3-2: new full-speed USB device number 2 using uhci_hcd 06:19 usb 3-2: New USB device found, idVendor=0483, idProduct=2016 06:19 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 06:19 usb 3-2: Product: Biometric Coprocessor 06:19 usb 3-2: Manufacturer: STMicroelectronics 06:19 psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000/0x0/0x0, board id: 0, fw id: 496542 06:19 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 06:19 pci 0000:00:1e.0: enabling device (0005 -> 0007) 06:19 yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] 06:19 sdhci: Secure Digital Host Controller Interface driver 06:19 sdhci: Copyright(c) Pierre Ossman 06:19 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 06:19 yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 06:19 yenta_cardbus 0000:15:00.0: Socket status: 30000006 06:19 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x6000-0x9fff] 06:19 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff] 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8300000-0xfbffffff: 06:19 excluding 0xf8300000-0xf86cffff 06:19 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref] 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4000000-0xf7ffffff: 06:19 excluding 0xf4000000-0xf7ffffff 06:19 sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) 06:19 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. 06:19 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. 06:19 mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA 06:19 EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: 06:19 excluding 0xc0000-0xcffff 0xe0000-0xfffff 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: 06:19 excluding 0xa0000000-0xa0ffffff 06:19 pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: 06:19 excluding 0x60000000-0x60ffffff 06:19 pci 0000:00:00.0: Intel 965GM Chipset 06:19 pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable 06:19 pci 0000:00:00.0: detected 8192K stolen memory 06:19 [drm] Memory usable by graphics device = 512M 06:19 [drm] Replacing VGA console driver 06:19 Console: switching to colour dummy device 80x25 06:19 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 06:19 [drm] Driver supports precise vblank timestamp query. 06:19 i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem 06:19 mmc0: new high speed SDHC card at address aaaa 06:19 [drm] RC6 disabled, disabling runtime PM support 06:19 [drm] initialized overlay support 06:19 [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0 06:19 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) 06:19 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 06:20 fbcon: inteldrmfb (fb0) is primary device 06:20 scsi 5:0:0:0: Direct-Access WD Elements 10A8 1042 PQ: 0 ANSI: 6 06:20 sd 5:0:0:0: Attached scsi generic sg2 type 0 06:20 sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) 06:20 sd 5:0:0:0: [sdb] Write Protect is off 06:20 sd 5:0:0:0: [sdb] No Caching mode page found 06:20 sd 5:0:0:0: [sdb] Assuming drive cache: write through 06:20 sdb: sdb1 sdb2 06:20 sd 5:0:0:0: [sdb] Attached SCSI disk 06:20 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 06:20 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 06:20 Console: switching to colour frame buffer device 210x65 06:20 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device 06:20 systemd: 73 output lines suppressed due to ratelimiting 06:20 EXT4-fs (sda2): re-mounted. Opts: data=ordered 06:20 loop: module loaded 06:20 RPC: Registered named UNIX socket transport module. 06:20 RPC: Registered udp transport module. 06:20 RPC: Registered tcp transport module. 06:20 RPC: Registered tcp NFSv4.1 backchannel transport module. 06:21 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 06:21 wmi: Mapper loaded 06:21 pps_core: LinuxPPS API ver. 1 registered 06:21 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 06:21 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 06:21 PTP clock support registered 06:21 thinkpad_acpi: ThinkPad ACPI Extras v0.25 06:21 thinkpad_acpi: http://ibm-acpi.sf.net/ 06:21 thinkpad_acpi: ThinkPad BIOS 7LETC9WW (2.29 ), EC 7KHT24WW-1.08 06:21 thinkpad_acpi: Lenovo ThinkPad T61, model 6464CTO 06:21 mmcblk0: mmc0:aaaa SL32G 29.7 GiB 06:21 mmcblk0: p1 06:21 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: 06:21 ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\_SB.PCI0.LPC.PMIO) (20170303/utaddress-247) 06:21 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 06:21 excluding 0xc0000-0xcffff 0xe0000-0xfffff 06:21 pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: 06:21 excluding 0xa0000000-0xa0ffffff 06:21 pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: 06:21 excluding 0x60000000-0x60ffffff 06:21 thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 06:21 thinkpad_acpi: ACPI backlight control delay disabled 06:21 thinkpad_acpi: radio switch found; radios are enabled 06:21 r592: driver successfully loaded 06:21 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k 06:21 e1000e: Copyright(c) 1999 - 2015 Intel Corporation. 06:21 random: crng init done 06:21 ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20170303/utaddress-247) 06:21 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 06:21 ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BF (\_SB.PCI0.LPC.LPIO) (20170303/utaddress-247) 06:21 ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver 06:21 thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked 06:21 lpc_ich: Resource conflict(s) found affecting gpio_ich 06:21 thinkpad_acpi: Standard ACPI backlight interface not available, thinkpad_acpi native brightness control enabled 06:21 input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 06:21 e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode 06:21 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds 06:21 iwl3945: Copyright(c) 2003-2011 Intel Corporation 06:21 iwl3945: hw_scan is disabled 06:21 iwl3945 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control 06:22 iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels 06:22 iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG 06:22 ppdev: user-space parallel port driver 06:22 iTCO_vendor_support: vendor-support=0 06:22 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 06:22 iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) 06:22 iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 06:22 intel_powerclamp: No package C-state available 06:22 e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:25:14:4a:e2 06:22 e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection 06:22 e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF 06:22 i801_smbus 0000:00:1f.3: SMBus using PCI interrupt 06:22 snd_hda_intel 0000:00:1b.0: probe_mask set to 0x1 for device 17aa:20ac 06:22 snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:speaker 06:22 snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) 06:22 snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) 06:22 snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 06:22 snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0 06:22 snd_hda_codec_analog hdaudioC0D0: inputs: 06:22 snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15 06:22 snd_hda_codec_analog hdaudioC0D0: Mic=0x14 06:22 EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered 06:22 snd_hda_codec_analog hdaudioC0D0: Dock Mic=0x1c 06:22 EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered,user_xattr 06:22 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 06:22 input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 06:22 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 06:24 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 06:24 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready 06:24 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:24 iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9 06:24 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:24 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:24 ip6_tables: (C) 2000-2006 Netfilter Core Team 06:24 Ebtables v2.0 registered 06:25 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:25 bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 06:25 tun: Universal TUN/TAP device driver, 1.6 06:25 virbr0: port 1(virbr0-nic) entered blocking state 06:25 virbr0: port 1(virbr0-nic) entered disabled state 06:25 device virbr0-nic entered promiscuous mode 06:25 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 06:25 virbr0: port 1(virbr0-nic) entered blocking state 06:25 virbr0: port 1(virbr0-nic) entered listening state 06:25 virbr0: port 1(virbr0-nic) entered disabled state 06:28 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 06:32 wlan0: associated 06:32 IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 06:32 NFSD: starting 90-second grace period (net ffffffff8afe0240) 06:42 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) 06:48 usb 2-2: USB disconnect, device number 2 06:55 usb 2-2: new high-speed USB device number 3 using ehci-pci 06:55 usb 5-2: new full-speed USB device number 2 using uhci_hcd 06:56 usb 5-2: not running at top speed; connect to a high speed hub 06:56 usb 5-2: New USB device found, idVendor=1058, idProduct=10a8 06:56 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 06:56 usb 5-2: Product: Elements 10A8 06:56 usb 5-2: Manufacturer: Western Digital 06:56 usb 5-2: SerialNumber: 5758333145373354504C3031 06:56 usb-storage 5-2:1.0: USB Mass Storage device detected 06:56 scsi host5: usb-storage 5-2:1.0 06:57 scsi 5:0:0:0: Direct-Access WD Elements 10A8 1042 PQ: 0 ANSI: 6 06:57 sd 5:0:0:0: Attached scsi generic sg2 type 0 06:57 sd 5:0:0:0: [sdb] Spinning up disk... 06:59 . 07:00 . 07:01 . 07:01 . 07:01 ready 07:01 sd 5:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) 07:01 sd 5:0:0:0: [sdb] Write Protect is off 07:01 sd 5:0:0:0: [sdb] No Caching mode page found 07:01 sd 5:0:0:0: [sdb] Assuming drive cache: write through 07:01 sdb: sdb1 sdb2 07:01 sd 5:0:0:0: [sdb] Attached SCSI disk 07:08 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) 07:27 nfsd: last server has exited, flushing export cache --------------37CFF9BAD1824E9CE0AFABD6 Content-Type: text/plain; charset=UTF-8; name="k440s" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="k440s" 04:50 microcode: microcode updated early to revision 0x20, date = 2017-01-27 04:50 random: get_random_bytes called from start_kernel+0x42/0x4e6 with crng_init=0 04:50 Linux version 4.13.0-0.rc1.git3.2.fc27.x86_64 (mockbuild@buildvm-22.phx2.fedoraproject.org) (gcc version 7.1.1 20170718 (Red Hat 7.1.1-6) (GCC)) #1 SMP Thu Jul 20 22:05:05 UTC 2017 04:50 Command line: BOOT_IMAGE=/vmlinuz-4.13.0-0.rc1.git3.2.fc27.x86_64 root=UUID=3756a4b4-a65d-48d3-85e3-286d101cd4b8 ro vconsole.font=latarcyrheb-sun16 rhgb selinux=0 quiet LANG=cs_CZ.UTF-8 04:50 x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' 04:50 x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' 04:50 x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' 04:50 x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 04:50 x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. 04:50 e820: BIOS-provided physical RAM map: 04:50 BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable 04:50 BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved 04:50 BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved 04:50 BIOS-e820: [mem 0x0000000000100000-0x00000000ce21dfff] usable 04:50 BIOS-e820: [mem 0x00000000ce21e000-0x00000000dcd3efff] reserved 04:50 BIOS-e820: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS 04:50 BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data 04:50 BIOS-e820: [mem 0x00000000dceff000-0x00000000df9fffff] reserved 04:50 BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved 04:50 BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved 04:50 BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved 04:50 BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved 04:50 BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved 04:50 BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved 04:50 BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 04:50 BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved 04:50 BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable 04:50 NX (Execute Disable) protection: active 04:50 random: fast init done 04:50 SMBIOS 2.7 present. 04:50 DMI: LENOVO 20AQ0069GE/20AQ0069GE, BIOS GJET67WW (2.17 ) 12/10/2013 04:50 tsc: Fast TSC calibration using PIT 04:50 e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000 04:50 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT 04:50 e820: last_pfn = 0xce21e max_arch_pfn = 0x400000000 04:50 found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9996400f0100] 04:50 Using GB pages for direct mapping 04:50 RAMDISK: [mem 0x35925000-0x36c8afff] 04:50 ACPI: Early table checksum verification disabled 04:50 ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) 04:50 ACPI: XSDT 0x00000000DCEFE170 0000F4 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: FACP 0x00000000DCEF8000 00010C (v05 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: DSDT 0x00000000DCEE2000 010E6D (v01 LENOVO TP-GJ 00002170 INTL 20120711) 04:50 ACPI: FACS 0x00000000DCE4A000 000040 04:50 ACPI: SLIC 0x00000000DCEFD000 000176 (v01 LENOVO TP-GJ 00002170 PTEC 00000001) 04:50 ACPI: DBGP 0x00000000DCEFB000 000034 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: ECDT 0x00000000DCEFA000 000052 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: HPET 0x00000000DCEF7000 000038 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: APIC 0x00000000DCEF6000 000098 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: MCFG 0x00000000DCEF5000 00003C (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: SSDT 0x00000000DCEF4000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) 04:50 ACPI: SSDT 0x00000000DCEF3000 00044F (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) 04:50 ACPI: SSDT 0x00000000DCEE1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) 04:50 ACPI: SSDT 0x00000000DCEE0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) 04:50 ACPI: SSDT 0x00000000DCEDF000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) 04:50 ACPI: SSDT 0x00000000DCEDE000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711) 04:50 ACPI: SSDT 0x00000000DCEDC000 001215 (v01 LENOVO SaSsdt 00003000 INTL 20120711) 04:50 ACPI: SSDT 0x00000000DCEDB000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711) 04:50 ACPI: PCCT 0x00000000DCEDA000 00006E (v05 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: SSDT 0x00000000DCED9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711) 04:50 ACPI: TCPA 0x00000000DCED8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) 04:50 ACPI: UEFI 0x00000000DCED7000 000042 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: MSDM 0x00000000DCDB2000 000055 (v03 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: ASF! 0x00000000DCEFC000 0000A5 (v32 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: BATB 0x00000000DCED6000 000046 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: FPDT 0x00000000DCED5000 000064 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: UEFI 0x00000000DCED4000 0002E2 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 ACPI: SSDT 0x00000000DCED3000 00047F (v01 LENOVO IsctTabl 00001000 INTL 20120711) 04:50 ACPI: DMAR 0x00000000DCED2000 0000B0 (v01 LENOVO TP-GJ 00002170 PTEC 00000002) 04:50 No NUMA configuration found 04:50 Faking a node at [mem 0x0000000000000000-0x000000021e5fffff] 04:50 NODE_DATA(0) allocated [mem 0x21e5d3000-0x21e5fdfff] 04:50 Zone ranges: 04:50 DMA [mem 0x0000000000001000-0x0000000000ffffff] 04:50 DMA32 [mem 0x0000000001000000-0x00000000ffffffff] 04:50 Normal [mem 0x0000000100000000-0x000000021e5fffff] 04:50 Device empty 04:50 Movable zone start for each node 04:50 Early memory node ranges 04:50 node 0: [mem 0x0000000000001000-0x000000000009cfff] 04:50 node 0: [mem 0x0000000000100000-0x00000000ce21dfff] 04:50 node 0: [mem 0x0000000100000000-0x000000021e5fffff] 04:50 Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff] 04:50 Reserving Intel graphics memory at 0x00000000dda00000-0x00000000df9fffff 04:50 ACPI: PM-Timer IO Port: 0x1808 04:50 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) 04:50 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 04:50 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 04:50 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 04:50 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 04:50 Using ACPI (MADT) for SMP configuration information 04:50 ACPI: HPET id: 0x8086a301 base: 0xfed00000 04:50 smpboot: Allowing 8 CPUs, 4 hotplug CPUs 04:50 PM: Registered nosave memory: [mem 0x00000000-0x00000fff] 04:50 PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] 04:50 PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] 04:50 PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] 04:50 PM: Registered nosave memory: [mem 0xce21e000-0xdcd3efff] 04:50 PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff] 04:50 PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff] 04:50 PM: Registered nosave memory: [mem 0xdceff000-0xdf9fffff] 04:50 PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] 04:50 PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] 04:50 PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff] 04:50 PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] 04:50 PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff] 04:50 PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] 04:50 PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] 04:50 PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] 04:50 PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] 04:50 PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] 04:50 PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] 04:50 PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] 04:50 PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] 04:50 PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] 04:50 PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] 04:50 PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] 04:50 e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices 04:50 Booting paravirtualized kernel on bare hardware 04:50 clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns 04:50 setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 04:50 percpu: Embedded 37 pages/cpu @ffff99985e200000 s112600 r8192 d30760 u262144 04:50 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1985668 04:50 Policy zone: Normal 04:50 Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-0.rc1.git3.2.fc27.x86_64 root=UUID=3756a4b4-a65d-48d3-85e3-286d101cd4b8 ro vconsole.font=latarcyrheb-sun16 rhgb selinux=0 quiet LANG=cs_CZ.UTF-8 04:50 PID hash table entries: 4096 (order: 3, 32768 bytes) 04:50 Memory: 7833416K/8068840K available (8821K kernel code, 2403K rwdata, 3756K rodata, 2220K init, 1976K bss, 235424K reserved, 0K cma-reserved) 04:50 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 04:50 ftrace: allocating 34860 entries in 137 pages 04:50 Hierarchical RCU implementation. 04:50 #011RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. 04:50 #011Tasks RCU enabled. 04:50 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 04:50 NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 04:50 #011Offload RCU callbacks from CPUs: . 04:50 Console: colour VGA+ 80x25 04:50 console [tty0] enabled 04:50 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns 04:50 tsc: Fast TSC calibration using PIT 04:50 tsc: Detected 2693.743 MHz processor 04:50 Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.48 BogoMIPS (lpj=2693743) 04:50 pid_max: default: 32768 minimum: 301 04:50 ACPI: Core revision 20170531 04:50 ACPI: 11 ACPI AML tables successfully acquired and loaded 04:50 Security Framework initialized 04:50 Yama: becoming mindful. 04:50 SELinux: Disabled at boot. 04:50 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) 04:50 Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) 04:50 Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) 04:50 Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) 04:50 CPU: Physical Processor ID: 0 04:50 CPU: Processor Core ID: 0 04:50 ENERGY_PERF_BIAS: Set to 'normal', was 'performance' 04:50 ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) 04:50 mce: CPU supports 7 MCE banks 04:50 CPU0: Thermal monitoring enabled (TM1) 04:50 process: using mwait in idle threads 04:50 Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 04:50 Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 04:50 Freeing SMP alternatives memory: 32K 04:50 smpboot: Max logical packages: 4 04:50 DMAR: Host address width 39 04:50 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 04:50 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a 04:50 DMAR: DRHD base: 0x000000fed91000 flags: 0x1 04:50 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da 04:50 DMAR: RMRR base: 0x000000daed3000 end: 0x000000daee9fff 04:50 DMAR: RMRR base: 0x000000dd800000 end: 0x000000df9fffff 04:50 DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 04:50 DMAR-IR: HPET id 0 under DRHD base 0xfed91000 04:50 DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. 04:50 DMAR-IR: Enabled IRQ remapping in x2apic mode 04:50 x2apic enabled 04:50 Switched APIC routing to cluster x2apic. 04:50 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 04:50 smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (family: 0x6, model: 0x45, stepping: 0x1) 04:50 Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. 04:50 ... version: 3 04:50 ... bit width: 48 04:50 ... generic registers: 4 04:50 ... value mask: 0000ffffffffffff 04:50 ... max period: 00007fffffffffff 04:50 ... fixed-purpose events: 3 04:50 ... event mask: 000000070000000f 04:50 Hierarchical SRCU implementation. 04:50 NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. 04:50 smp: Bringing up secondary CPUs ... 04:50 x86: Booting SMP configuration: 04:50 .... node #0, CPUs: #1 #2 #3 04:50 smp: Brought up 1 node, 4 CPUs 04:50 smpboot: Total of 4 processors activated (21571.00 BogoMIPS) 04:50 devtmpfs: initialized 04:50 x86/mm: Memory block size: 128MB 04:50 PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes) 04:50 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns 04:50 futex hash table entries: 2048 (order: 5, 131072 bytes) 04:50 pinctrl core: initialized pinctrl subsystem 04:50 RTC time: 17:04:49, date: 07/24/17 04:50 NET: Registered protocol family 16 04:50 cpuidle: using governor menu 04:50 Error parsing PCC subspaces from PCCT 04:50 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it 04:50 ACPI: bus type PCI registered 04:50 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 04:50 PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) 04:50 PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 04:50 PCI: Using configuration type 1 for base access 04:50 core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on 04:50 HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages 04:50 HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages 04:50 ACPI: Added _OSI(Module Device) 04:50 ACPI: Added _OSI(Processor Device) 04:50 ACPI: Added _OSI(3.0 _SCP Extensions) 04:50 ACPI: Added _OSI(Processor Aggregator Device) 04:50 ACPI: EC: EC started 04:50 ACPI: EC: interrupt blocked 04:50 ACPI: \: Used as first EC 04:50 ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 04:50 ACPI: \: Used as boot ECDT EC to handle transactions 04:50 ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored 04:50 ACPI Error: Needed type [Reference], found [Integer] ffff9998545573a8 (20170531/exresop-103) 04:50 ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461) 04:50 ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170531/psparse-550) 04:50 ACPI: Dynamic OEM Table Load: 04:50 ACPI: SSDT 0xFFFF999854B60000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) 04:50 ACPI: Dynamic OEM Table Load: 04:50 ACPI: SSDT 0xFFFF999854530C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) 04:50 ACPI: Interpreter enabled 04:50 ACPI: (supports S0 S3 S4 S5) 04:50 ACPI: Using IOAPIC for interrupt routing 04:50 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 04:50 ACPI: Power Resource [PUBS] (on) 04:50 acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) 04:50 ACPI: Power Resource [NVP3] (on) 04:50 ACPI: Power Resource [NVP2] (on) 04:50 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) 04:50 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11) 04:50 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) 04:50 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11) 04:50 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) 04:50 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. 04:50 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) 04:50 ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11) 04:50 ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) 04:50 acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] 04:50 acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] 04:50 acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] 04:50 acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] 04:50 acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] 04:50 acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM 04:50 PCI host bridge to bus 0000:00 04:50 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] 04:50 pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] 04:50 pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 04:50 pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window] 04:50 pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] 04:50 pci_bus 0000:00: root bus resource [bus 00-3f] 04:50 pci 0000:00:1c.0: PCI bridge to [bus 02] 04:50 pci 0000:00:1c.1: PCI bridge to [bus 03] 04:50 ACPI: Enabled 4 GPEs in block 00 to 7F 04:50 ACPI: EC: EC stopped 04:50 ACPI: EC: EC started 04:50 ACPI: EC: interrupt blocked 04:50 ACPI: EC: interrupt unblocked 04:50 ACPI: EC: event unblocked 04:50 ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 04:50 ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot ECDT EC to handle transactions and events 04:50 ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 04:50 ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events 04:50 pci 0000:00:02.0: vgaarb: setting as boot VGA device 04:50 pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none 04:50 pci 0000:00:02.0: vgaarb: bridge control possible 04:50 vgaarb: loaded 04:50 SCSI subsystem initialized 04:50 ACPI: bus type USB registered 04:50 usbcore: registered new interface driver usbfs 04:50 usbcore: registered new interface driver hub 04:50 usbcore: registered new device driver usb 04:50 EDAC MC: Ver: 3.0.0 04:50 PCI: Using ACPI for IRQ routing 04:50 NetLabel: Initializing 04:50 NetLabel: domain hash size = 128 04:50 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO 04:50 NetLabel: unlabeled traffic allowed by default 04:50 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 04:50 hpet0: 8 comparators, 64-bit 14.318180 MHz counter 04:50 clocksource: Switched to clocksource hpet 04:50 VFS: Disk quotas dquot_6.6.0 04:50 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 04:50 pnp: PnP ACPI init 04:50 system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved 04:50 system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved 04:50 system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved 04:50 system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved 04:50 system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved 04:50 system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved 04:50 system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved 04:50 system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved 04:50 system 00:00: [mem 0x000dc000-0x000dffff] has been reserved 04:50 system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved 04:50 system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved 04:50 system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved 04:50 system 00:00: [mem 0x000ec000-0x000effff] could not be reserved 04:50 system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved 04:50 system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved 04:50 system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved 04:50 system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved 04:50 pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] 04:50 system 00:01: [io 0x1800-0x189f] has been reserved 04:50 system 00:01: [io 0x0800-0x087f] has been reserved 04:50 system 00:01: [io 0x0880-0x08ff] has been reserved 04:50 system 00:01: [io 0x0900-0x097f] has been reserved 04:50 system 00:01: [io 0x0980-0x09ff] has been reserved 04:50 system 00:01: [io 0x0a00-0x0a7f] has been reserved 04:50 system 00:01: [io 0x0a80-0x0aff] has been reserved 04:50 system 00:01: [io 0x0b00-0x0b7f] has been reserved 04:50 system 00:01: [io 0x0b80-0x0bff] has been reserved 04:50 system 00:01: [io 0x15e0-0x15ef] has been reserved 04:50 system 00:01: [io 0x1600-0x167f] has been reserved 04:50 system 00:01: [io 0x1640-0x165f] has been reserved 04:50 system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved 04:50 system 00:01: [mem 0x00000000-0x00000fff] could not be reserved 04:50 system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved 04:50 system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved 04:50 system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved 04:50 system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved 04:50 system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved 04:50 pnp: PnP ACPI: found 6 devices 04:50 clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 04:50 pci 0000:00:1c.0: PCI bridge to [bus 02] 04:50 pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff] 04:50 pci 0000:00:1c.1: PCI bridge to [bus 03] 04:50 pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff] 04:50 NET: Registered protocol family 2 04:50 TCP established hash table entries: 65536 (order: 7, 524288 bytes) 04:50 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) 04:50 TCP: Hash tables configured (established 65536 bind 65536) 04:50 UDP hash table entries: 4096 (order: 5, 131072 bytes) 04:50 UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) 04:50 NET: Registered protocol family 1 04:50 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 04:50 Unpacking initramfs... 04:50 Freeing initrd memory: 19864K 04:50 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 04:50 software IO TLB [mem 0xca21e000-0xce21e000] (64MB) mapped at [ffff99970a21e000-ffff99970e21dfff] 04:50 audit: initializing netlink subsys (disabled) 04:50 audit: type=2000 audit(1500915889.619:1): state=initialized audit_enabled=0 res=1 04:50 Initialise system trusted keyrings 04:50 Key type blacklist registered 04:50 workingset: timestamp_bits=36 max_order=21 bucket_order=0 04:50 zbud: loaded 04:50 NET: Registered protocol family 38 04:50 Key type asymmetric registered 04:50 Asymmetric key parser 'x509' registered 04:50 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 04:50 io scheduler noop registered 04:50 io scheduler deadline registered 04:50 io scheduler cfq registered (default) 04:50 io scheduler mq-deadline registered 04:50 atomic64_test: passed for x86-64 platform with CX8 and with SSE 04:50 ACPI: AC Adapter [AC] (on-line) 04:50 input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 04:50 ACPI: Lid Switch [LID] 04:50 input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 04:50 ACPI: Sleep Button [SLPB] 04:50 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 04:50 ACPI: Power Button [PWRF] 04:50 (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 04:50 thermal LNXTHERM:00: registered as thermal_zone0 04:50 ACPI: Thermal Zone [THM0] (48 C) 04:50 GHES: HEST is not enabled! 04:50 Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 04:50 Non-volatile memory driver v1.3 04:50 Linux agpgart interface v0.103 04:50 ACPI: Battery Slot [BAT0] (battery present) 04:50 ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode 04:50 ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 04:50 scsi host0: ahci 04:50 scsi host1: ahci 04:50 scsi host2: ahci 04:50 ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 42 04:50 ata2: DUMMY 04:50 ata3: DUMMY 04:50 libphy: Fixed MDIO Bus: probed 04:50 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 04:50 ehci-pci: EHCI PCI platform driver 04:50 ehci-pci 0000:00:1d.0: EHCI Host Controller 04:50 ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 04:50 ehci-pci 0000:00:1d.0: debug port 2 04:50 ACPI: Battery Slot [BAT1] (battery present) 04:50 ehci-pci 0000:00:1d.0: irq 23, io mem 0xf063d000 04:50 ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 04:50 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 04:50 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 04:50 usb usb1: Product: EHCI Host Controller 04:50 usb usb1: Manufacturer: Linux 4.13.0-0.rc1.git3.2.fc27.x86_64 ehci_hcd 04:50 usb usb1: SerialNumber: 0000:00:1d.0 04:50 hub 1-0:1.0: USB hub found 04:50 hub 1-0:1.0: 3 ports detected 04:50 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 04:50 ohci-pci: OHCI PCI platform driver 04:50 uhci_hcd: USB Universal Host Controller Interface driver 04:50 xhci_hcd 0000:00:14.0: xHCI Host Controller 04:50 xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 04:50 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 04:50 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 04:50 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 04:50 usb usb2: Product: xHCI Host Controller 04:50 usb usb2: Manufacturer: Linux 4.13.0-0.rc1.git3.2.fc27.x86_64 xhci-hcd 04:50 usb usb2: SerialNumber: 0000:00:14.0 04:50 hub 2-0:1.0: USB hub found 04:50 hub 2-0:1.0: 9 ports detected 04:50 xhci_hcd 0000:00:14.0: xHCI Host Controller 04:50 xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 04:50 usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 04:50 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 04:50 usb usb3: Product: xHCI Host Controller 04:50 usb usb3: Manufacturer: Linux 4.13.0-0.rc1.git3.2.fc27.x86_64 xhci-hcd 04:50 usb usb3: SerialNumber: 0000:00:14.0 04:50 hub 3-0:1.0: USB hub found 04:50 hub 3-0:1.0: 4 ports detected 04:50 usbcore: registered new interface driver usbserial 04:50 usbcore: registered new interface driver usbserial_generic 04:50 usbserial: USB Serial support registered for generic 04:50 i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 04:50 serio: i8042 KBD port at 0x60,0x64 irq 1 04:50 serio: i8042 AUX port at 0x60,0x64 irq 12 04:50 mousedev: PS/2 mouse device common for all mice 04:50 rtc_cmos 00:02: RTC can wake from S4 04:50 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 04:50 rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs 04:50 device-mapper: uevent: version 1.0.3 04:50 device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com 04:50 intel_pstate: Intel P-state driver initializing 04:50 hidraw: raw HID events driver (C) Jiri Kosina 04:50 usbcore: registered new interface driver usbhid 04:50 usbhid: USB HID core driver 04:50 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 04:50 drop_monitor: Initializing network drop monitor service 04:50 ip_tables: (C) 2000-2006 Netfilter Core Team 04:50 Initializing XFRM netlink socket 04:50 NET: Registered protocol family 10 04:50 Segment Routing with IPv6 04:50 mip6: Mobile IPv6 04:50 NET: Registered protocol family 17 04:50 RAS: Correctable Errors collector initialized. 04:50 microcode: sig=0x40651, pf=0x40, revision=0x20 04:50 microcode: Microcode Update Driver: v2.2. 04:50 AVX2 version of gcm_enc/dec engaged. 04:50 AES CTR mode by8 optimization enabled 04:50 sched_clock: Marking stable (885537102, 0)->(890157704, -4620602) 04:50 registered taskstats version 1 04:50 Loading compiled-in X.509 certificates 04:50 Loaded X.509 cert 'Fedora kernel signing key: f2b7b3c11982a421c0e58e80c1ed66ac68e780f1' 04:50 zswap: loaded using pool lzo/zbud 04:50 Key type big_key registered 04:50 Key type encrypted registered 04:50 Magic number: 9:127:88 04:50 rtc_cmos 00:02: setting system clock to 2017-07-24 17:04:50 UTC (1500915890) 04:50 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) 04:50 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 04:50 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 04:50 ata1.00: supports DRM functions and may not be fully accessible 04:50 ata1.00: NCQ Send/Recv Log not supported 04:50 ata1.00: ATA-9: SAMSUNG MZ7TD256HAFV-000L9, DXT02L5Q, max UDMA/133 04:50 ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA 04:50 ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out 04:50 ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out 04:50 ata1.00: supports DRM functions and may not be fully accessible 04:50 ata1.00: NCQ Send/Recv Log not supported 04:50 ata1.00: configured for UDMA/133 04:50 scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TD256 2L5Q PQ: 0 ANSI: 5 04:50 sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) 04:50 sd 0:0:0:0: [sda] Write Protect is off 04:50 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 04:50 sd 0:0:0:0: Attached scsi generic sg0 type 0 04:50 sda: sda1 sda2 sda3 sda4 < sda5 sda6 > 04:50 sd 0:0:0:0: [sda] supports TCG Opal 04:50 sd 0:0:0:0: [sda] Attached SCSI disk 04:50 Freeing unused kernel memory: 2220K 04:50 Write protecting the kernel read-only data: 14336k 04:50 Freeing unused kernel memory: 1408K 04:50 Freeing unused kernel memory: 340K 04:50 x86/mm: Checked W+X mappings: passed, no W+X pages found. 04:50 rodata_test: all tests were successful 04:50 usb 1-1: new high-speed USB device number 2 using ehci-pci 04:50[1]: Starting Create list of required static device nodes for the current kernel... 04:50 usb 2-2: new low-speed USB device number 2 using xhci_hcd 04:50cmdline: Using kernel command line parameters: BOOT_IMAGE=/vmlinuz-4.13.0-0.rc1.git3.2.fc27.x86_64 root=UUID=3756a4b4-a65d-48d3-85e3-286d101cd4b8 ro vconsole.font=latarcyrheb-sun16 rhgb selinux=0 quiet LANG=cs_CZ.UTF-8 04:50 usb 1-1: New USB device found, idVendor=8087, idProduct=8000 04:50 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 04:50 hub 1-1:1.0: USB hub found 04:50 hub 1-1:1.0: 8 ports detected 04:50 psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834] 04:50 audit: type=1130 audit(1500915890.913:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 04:50 pps_core: LinuxPPS API ver. 1 registered 04:50 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 04:50 psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..] 04:50 psmouse serio1: synaptics: Trying to set up SMBus access 04:50 PTP clock support registered 04:50 psmouse serio1: synaptics: SMbus companion is not ready yet 04:50 psmouse serio1: synaptics: quirked min/max coordinates: x [1024..5112], y [2024..4832] 04:50 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k 04:50 e1000e: Copyright(c) 1999 - 2015 Intel Corporation. 04:50 e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode 04:50 usb 2-2: New USB device found, idVendor=17ef, idProduct=6044 04:50 usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 04:50 usb 2-2: Product: ThinkPad USB Laser Mouse 04:50 input: ThinkPad USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:17EF:6044.0001/input/input6 04:50 hid-generic 0003:17EF:6044.0001: input,hidraw0: USB HID v1.11 Mouse [ThinkPad USB Laser Mouse] on usb-0000:00:14.0-2/input0 04:50 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw id: 1545510 04:50 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 04:51 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 04:51 usb 2-4: new high-speed USB device number 3 using xhci_hcd 04:51 usb 1-1.5: new full-speed USB device number 3 using ehci-pci 04:51 e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock 04:51 tsc: Refined TSC clocksource calibration: 2693.764 MHz 04:51 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d43bb7f27, max_idle_ns: 440795270902 ns 04:51 e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:55:53:b1 04:51 e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection 04:51 e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF 04:51 [drm] Memory usable by graphics device = 2048M 04:51 [drm] Replacing VGA console driver 04:51 Console: switching to colour dummy device 80x25 04:51 e1000e 0000:00:19.0 enp0s25: renamed from eth0 04:51 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 04:51 [drm] Driver supports precise vblank timestamp query. 04:51 i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem 04:51 usb 1-1.5: New USB device found, idVendor=058f, idProduct=9540 04:51 usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 04:51 usb 1-1.5: Product: EMV Smartcard Reader 04:51 usb 1-1.5: Manufacturer: Generic 04:51 [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 04:51 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) 04:51 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 04:51 usb 2-4: New USB device found, idVendor=0bdb, idProduct=193e 04:51 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 04:51 usb 2-4: Product: N5321 gw 04:51 usb 2-4: Manufacturer: Lenovo 04:51 usb 2-4: SerialNumber: 07F936FE88D7D0M0 04:51 usb 2-6: new full-speed USB device number 4 using xhci_hcd 04:52 fbcon: inteldrmfb (fb0) is primary device 04:52 usb 2-6: New USB device found, idVendor=138a, idProduct=0017 04:52 usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 04:52 usb 2-6: SerialNumber: 2308d4990a85 04:52 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 04:52 usb 2-7: new full-speed USB device number 5 using xhci_hcd 04:52 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 04:52 usb 2-7: New USB device found, idVendor=8087, idProduct=07dc 04:52 usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 04:52 usb 2-8: new high-speed USB device number 6 using xhci_hcd 04:52 clocksource: Switched to clocksource tsc 04:52 usb 2-8: New USB device found, idVendor=04f2, idProduct=b39a 04:52 usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 04:52 usb 2-8: Product: Integrated Camera 04:52 usb 2-8: Manufacturer: SunplusIT INC. 04:52 cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device 04:52 cdc_wdm 2-4:1.8: cdc-wdm1: USB WDM device 04:52 usbcore: registered new interface driver cdc_wdm 04:52 usbcore: registered new interface driver cdc_ncm 04:52 cdc_mbim 2-4:1.6: cdc-wdm2: USB WDM device 04:52 cdc_mbim 2-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, fa:b2:b5:84:d0:71 04:52 usbcore: registered new interface driver cdc_mbim 04:52 cdc_mbim 2-4:1.6 wwp0s20u4i6: renamed from wwan0 04:52 Console: switching to colour frame buffer device 240x67 04:52 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device 04:52 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) 04:53 systemd: 15 output lines suppressed due to ratelimiting 04:53 EXT4-fs (sda3): re-mounted. Opts: (null) 04:54 RPC: Registered named UNIX socket transport module. 04:54 RPC: Registered udp transport module. 04:54 RPC: Registered tcp transport module. 04:54 RPC: Registered tcp NFSv4.1 backchannel transport module. 04:54 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 04:54 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 04:54 i801_smbus 0000:00:1f.3: SPD Write Disable is set 04:54 i801_smbus 0000:00:1f.3: SMBus using PCI interrupt 04:54 acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) 04:54 acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) 04:54 tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) 04:54 thinkpad_acpi: ThinkPad ACPI Extras v0.25 04:54 thinkpad_acpi: http://ibm-acpi.sf.net/ 04:54 thinkpad_acpi: ThinkPad BIOS GJET67WW (2.17 ), EC unknown 04:54 thinkpad_acpi: Lenovo ThinkPad T440s, model 20AQ0069GE 04:54 thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). 04:54 thinkpad_acpi: radio switch found; radios are enabled 04:54 thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver 04:54 thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... 04:54 thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked 04:54 thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked 04:54 tpm tpm0: A TPM error (6) occurred attempting to read a pcr value 04:54 tpm tpm0: TPM is disabled/deactivated (0x6) 04:54 e1000e 0000:00:19.0 em1: renamed from enp0s25 04:54 input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 04:54 Bluetooth: Core ver 2.22 04:54 NET: Registered protocol family 31 04:54 Bluetooth: HCI device and connection manager initialized 04:54 Bluetooth: HCI socket layer initialized 04:54 Bluetooth: L2CAP socket layer initialized 04:54 Bluetooth: SCO socket layer initialized 04:54 cdc_acm 2-4:1.1: ttyACM0: USB ACM device 04:54 cdc_acm 2-4:1.3: ttyACM1: USB ACM device 04:54 cdc_acm 2-4:1.9: ttyACM2: USB ACM device 04:54 usbcore: registered new interface driver cdc_acm 04:54 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 04:54 media: Linux media interface: v0.10 04:54 snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) 04:54 input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 04:54 input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 04:54 input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 04:54 input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 04:54 input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 04:54 snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker 04:54 snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) 04:54 snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) 04:54 snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 04:54 snd_hda_codec_realtek hdaudioC1D0: inputs: 04:54 snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 04:54 snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a 04:54 snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 04:54 Linux video capture interface: v2.00 04:54 RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer 04:54 RAPL PMU: hw unit of domain pp0-core 2^-14 Joules 04:54 RAPL PMU: hw unit of domain package 2^-14 Joules 04:54 RAPL PMU: hw unit of domain dram 2^-14 Joules 04:54 RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules 04:54 Intel(R) Wireless WiFi driver for Linux 04:54 Copyright(c) 2003- 2015 Intel Corporation 04:54 input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 04:54 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 04:54 input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 04:54 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 04:54 iTCO_vendor_support: vendor-support=0 04:54 usbcore: registered new interface driver btusb 04:54 Bluetooth: hci0: read Intel version: 370710018002030d56 04:54 Bluetooth: hci0: Intel device is already patched. patch num: 56 04:54 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 04:54 iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860) 04:54 iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 04:54 iwlwifi 0000:03:00.0: loaded firmware version 17.459231.0 op_mode iwlmvm 04:54 uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a) 04:54 uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized! 04:54 uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized! 04:54 uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized! 04:54 uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized! 04:54 input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input21 04:54 usbcore: registered new interface driver uvcvideo 04:54 USB Video Class driver (1.1.1) 04:54 iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 04:54 iwlwifi 0000:03:00.0: base HW address: 5c:51:4f:e8:e9:28 04:54 intel_rapl: Found RAPL domain package 04:54 intel_rapl: Found RAPL domain core 04:54 intel_rapl: Found RAPL domain uncore 04:54 intel_rapl: Found RAPL domain dram 04:54 Adding 43979772k swap on /dev/sda5. Priority:-1 extents:1 across:43979772k SSFS 04:54 psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834] 04:54 psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..] 04:54 psmouse serio1: synaptics: Trying to set up SMBus access 04:54 psmouse serio1: synaptics: SMbus companion is not ready yet 04:54 psmouse serio1: synaptics: quirked min/max coordinates: x [1024..5112], y [2024..4832] 04:54 iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 04:54 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x127c00/0x0, board id: 2668, fw id: 1545510 04:54 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 04:54 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 04:55 psmouse serio3: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 04:55 EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) 04:55 EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) 04:55 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio3/input/input22 04:55 random: crng init done 04:55 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 04:55 Bluetooth: BNEP filters: protocol multicast 04:55 Bluetooth: BNEP socket layer initialized 04:59 ip6_tables: (C) 2000-2006 Netfilter Core Team 05:00 Ebtables v2.0 registered 05:00 nf_conntrack version 0.5.0 (65536 buckets, 262144 max) 05:00 bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. 05:01 Netfilter messages via NETLINK v0.30. 05:01 ip_set: protocol 6 05:01 IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready 05:01 IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready 05:01 IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready 05:01 IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready 05:01 IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready 05:02 IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready 05:03 tun: Universal TUN/TAP device driver, 1.6 05:03 virbr0: port 1(virbr0-nic) entered blocking state 05:03 virbr0: port 1(virbr0-nic) entered disabled state 05:03 device virbr0-nic entered promiscuous mode 05:03 virbr0: port 1(virbr0-nic) entered blocking state 05:03 virbr0: port 1(virbr0-nic) entered listening state 05:03 virbr0: port 1(virbr0-nic) entered disabled state 05:04 IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready 05:07 wlp3s0: associated 05:07 IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready 05:08 NFSD: starting 90-second grace period (net ffffffff96fde240) 14:14 usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd 14:14 usb 3-1: New USB device found, idVendor=1058, idProduct=10a8 14:14 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 14:14 usb 3-1: Product: Elements 10A8 14:14 usb 3-1: Manufacturer: Western Digital 14:14 usb 3-1: SerialNumber: 5758333145373354504C3031 14:14 usb-storage 3-1:1.0: USB Mass Storage device detected 14:14 scsi host3: usb-storage 3-1:1.0 14:14 usbcore: registered new interface driver usb-storage 14:14 usbcore: registered new interface driver uas 14:15 scsi 3:0:0:0: Direct-Access WD Elements 10A8 1042 PQ: 0 ANSI: 6 14:15 sd 3:0:0:0: Attached scsi generic sg1 type 0 14:15 sd 3:0:0:0: [sdb] Spinning up disk... 14:17 . 14:19 . 14:20 . 14:21 . 14:21 . 14:21 ready 14:21 sd 3:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) 14:21 sd 3:0:0:0: [sdb] Write Protect is off 14:21 sd 3:0:0:0: [sdb] No Caching mode page found 14:21 sd 3:0:0:0: [sdb] Assuming drive cache: write through 14:21 sdb: sdb1 sdb2 14:21 sd 3:0:0:0: [sdb] Attached SCSI disk 14:30 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) 16:32 xhci_hcd 0000:00:14.0: Cannot set link state. 16:32 usb usb3-port1: cannot disable (err = -32) 16:32 usb 3-1: USB disconnect, device number 2 --------------37CFF9BAD1824E9CE0AFABD6--