Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751726AbdGZKhR (ORCPT ); Wed, 26 Jul 2017 06:37:17 -0400 Received: from mail-oi0-f66.google.com ([209.85.218.66]:38808 "EHLO mail-oi0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751389AbdGZKhP (ORCPT ); Wed, 26 Jul 2017 06:37:15 -0400 MIME-Version: 1.0 In-Reply-To: <1500309314-18464-4-git-send-email-thor.thayer@linux.intel.com> References: <1500309314-18464-1-git-send-email-thor.thayer@linux.intel.com> <1500309314-18464-4-git-send-email-thor.thayer@linux.intel.com> From: Andy Shevchenko Date: Wed, 26 Jul 2017 13:37:13 +0300 Message-ID: Subject: Re: [PATCHv5 3/3] i2c: altera: Add Altera I2C Controller driver To: Thor Thayer Cc: Wolfram Sang , Rob Herring , Mark Rutland , "David S. Miller" , Greg Kroah-Hartman , Mauro Carvalho Chehab , linux-i2c , devicetree , "linux-kernel@vger.kernel.org" , linux-arm Mailing List Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 22050 Lines: 596 On Mon, Jul 17, 2017 at 7:35 PM, wrote: > From: Thor Thayer > > Add driver support for the Altera I2C Controller. The I2C > controller is soft IP for use in FPGAs. > So, there are few more things that can be improved, like removing __func__ parameter from dev_printk() calls or _isr() refactoring, though I leave it to be judged by Wolfram and others. To avoid any further bikeshedding it looks good enough to me, FWIW, Reviewed-by: Andy Shevchenko > Signed-off-by: Thor Thayer > --- > v2 Remove altr, from fifo-size to agree with bindings. > Change compatible string to "altr,softip-i2c" > v3 Add version to compatible string "altr,softip-i2c-v1.0" > v4 Add default 100kHz message. Cleanup IRQ error message. > v5 Cleanup header usage - remove init.h. > Fix 1 byte RX bug and add convenience function for transfer shared by RX and TX. > Use readl_poll_timeout_atomic() function. > Cache the I2C Interrupt Status Enable Register. > Cleanup of irq_mask by combining into 1 function. > Use i2c_8bit_addr_from_msg() for cleaner xfer_msg implementation. > Restructure altr_i2c_xfer() without arrays and indexes. > Remove redundant assignments. > Remove function calls from inside if() statements. > Convert of_property_read_u32() to device_property_read_u32(). > Call i2c_m_read() once in irq. > --- > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-altera.c | 510 ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 521 insertions(+) > create mode 100644 drivers/i2c/busses/i2c-altera.c > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 1006b23..668147bf 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -328,6 +328,16 @@ config I2C_POWERMAC > > comment "I2C system bus drivers (mostly embedded / system-on-chip)" > > +config I2C_ALTERA > + tristate "Altera Soft IP I2C" > + depends on (ARCH_SOCFPGA || NIOS2) && OF > + help > + If you say yes to this option, support will be included for the > + Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures. > + > + This driver can also be built as a module. If so, the module > + will be called i2c-altera. > + > config I2C_ASPEED > tristate "Aspeed I2C Controller" > depends on ARCH_ASPEED || COMPILE_TEST > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index 1b2fc81..1395dcb 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o > obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o > > # Embedded system I2C/SMBus host controller drivers > +obj-$(CONFIG_I2C_ALTERA) += i2c-altera.o > obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o > obj-$(CONFIG_I2C_AT91) += i2c-at91.o > obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o > diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c > new file mode 100644 > index 0000000..e818901 > --- /dev/null > +++ b/drivers/i2c/busses/i2c-altera.c > @@ -0,0 +1,510 @@ > +/* > + * Copyright Intel Corporation (C) 2017. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see . > + * > + * Based on the i2c-axxia.c driver. > + */ > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define ALTR_I2C_TFR_CMD 0x00 /* Transfer Command register */ > +#define ALTR_I2C_TFR_CMD_STA BIT(9) /* send START before byte */ > +#define ALTR_I2C_TFR_CMD_STO BIT(8) /* send STOP after byte */ > +#define ALTR_I2C_TFR_CMD_RW_D BIT(0) /* Direction of transfer */ > +#define ALTR_I2C_RX_DATA 0x04 /* RX data FIFO register */ > +#define ALTR_I2C_CTRL 0x08 /* Control register */ > +#define ALTR_I2C_CTRL_RXT_SHFT 4 /* RX FIFO Threshold */ > +#define ALTR_I2C_CTRL_TCT_SHFT 2 /* TFER CMD FIFO Threshold */ > +#define ALTR_I2C_CTRL_BSPEED BIT(1) /* Bus Speed (1=Fast) */ > +#define ALTR_I2C_CTRL_EN BIT(0) /* Enable Core (1=Enable) */ > +#define ALTR_I2C_ISER 0x0C /* Interrupt Status Enable register */ > +#define ALTR_I2C_ISER_RXOF_EN BIT(4) /* Enable RX OVERFLOW IRQ */ > +#define ALTR_I2C_ISER_ARB_EN BIT(3) /* Enable ARB LOST IRQ */ > +#define ALTR_I2C_ISER_NACK_EN BIT(2) /* Enable NACK DET IRQ */ > +#define ALTR_I2C_ISER_RXRDY_EN BIT(1) /* Enable RX Ready IRQ */ > +#define ALTR_I2C_ISER_TXRDY_EN BIT(0) /* Enable TX Ready IRQ */ > +#define ALTR_I2C_ISR 0x10 /* Interrupt Status register */ > +#define ALTR_I2C_ISR_RXOF BIT(4) /* RX OVERFLOW IRQ */ > +#define ALTR_I2C_ISR_ARB BIT(3) /* ARB LOST IRQ */ > +#define ALTR_I2C_ISR_NACK BIT(2) /* NACK DET IRQ */ > +#define ALTR_I2C_ISR_RXRDY BIT(1) /* RX Ready IRQ */ > +#define ALTR_I2C_ISR_TXRDY BIT(0) /* TX Ready IRQ */ > +#define ALTR_I2C_STATUS 0x14 /* Status register */ > +#define ALTR_I2C_STAT_CORE BIT(0) /* Core Status (0=idle) */ > +#define ALTR_I2C_TC_FIFO_LVL 0x18 /* Transfer FIFO LVL register */ > +#define ALTR_I2C_RX_FIFO_LVL 0x1C /* Receive FIFO LVL register */ > +#define ALTR_I2C_SCL_LOW 0x20 /* SCL low count register */ > +#define ALTR_I2C_SCL_HIGH 0x24 /* SCL high count register */ > +#define ALTR_I2C_SDA_HOLD 0x28 /* SDA hold count register */ > + > +#define ALTR_I2C_ALL_IRQ (ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | \ > + ALTR_I2C_ISR_NACK | ALTR_I2C_ISR_RXRDY | \ > + ALTR_I2C_ISR_TXRDY) > + > +#define ALTR_I2C_THRESHOLD 0 /* IRQ Threshold at 1 element */ > +#define ALTR_I2C_DFLT_FIFO_SZ 4 > +#define ALTR_I2C_TIMEOUT 100000 /* 100ms */ > +#define ALTR_I2C_XFER_TIMEOUT (msecs_to_jiffies(250)) > + > +/** > + * altr_i2c_dev - I2C device context > + * @base: pointer to register struct > + * @msg: pointer to current message > + * @msg_len: number of bytes transferred in msg > + * @msg_err: error code for completed message > + * @msg_complete: xfer completion object > + * @dev: device reference > + * @adapter: core i2c abstraction > + * @i2c_clk: clock reference for i2c input clock > + * @bus_clk_rate: current i2c bus clock rate > + * @buf: ptr to msg buffer for easier use. > + * @fifo_size: size of the FIFO passed in. > + */ > +struct altr_i2c_dev { > + void __iomem *base; > + struct i2c_msg *msg; > + size_t msg_len; > + int msg_err; > + struct completion msg_complete; > + struct device *dev; > + struct i2c_adapter adapter; > + struct clk *i2c_clk; > + u32 bus_clk_rate; > + u8 *buf; > + u32 fifo_size; > + u32 isr_mask; > +}; > + > +static void i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable) > +{ > + u32 int_en = readl(idev->base + ALTR_I2C_ISER); > + > + if (enable) > + idev->isr_mask = int_en | mask; > + else > + idev->isr_mask = int_en & ~mask; > + > + writel(idev->isr_mask, idev->base + ALTR_I2C_ISER); > +} > + > +static void i2c_int_clear(struct altr_i2c_dev *idev, u32 mask) > +{ > + u32 int_en = readl(idev->base + ALTR_I2C_ISR); > + > + writel(int_en | mask, idev->base + ALTR_I2C_ISR); > +} > + > +static void altr_i2c_core_disable(struct altr_i2c_dev *idev) > +{ > + u32 tmp = readl(idev->base + ALTR_I2C_CTRL); > + > + writel(tmp & ~ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL); > +} > + > +static void altr_i2c_core_enable(struct altr_i2c_dev *idev) > +{ > + u32 tmp = readl(idev->base + ALTR_I2C_CTRL); > + > + writel(tmp | ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL); > +} > + > +static void altr_i2c_reset(struct altr_i2c_dev *idev) > +{ > + altr_i2c_core_disable(idev); > + altr_i2c_core_enable(idev); > +} > + > +static void altr_i2c_recover(struct altr_i2c_dev *idev) > +{ > + altr_i2c_reset(idev); > + /* Clock start bit + 8 bits + stop bit out */ > + writel(ALTR_I2C_TFR_CMD_STA | ALTR_I2C_TFR_CMD_STO, > + idev->base + ALTR_I2C_TFR_CMD); > + altr_i2c_reset(idev); > + > + i2c_recover_bus(&idev->adapter); > +} > + > +static inline void altr_i2c_stop(struct altr_i2c_dev *idev) > +{ > + writel(ALTR_I2C_TFR_CMD_STO, idev->base + ALTR_I2C_TFR_CMD); > +} > + > +static void altr_i2c_init(struct altr_i2c_dev *idev) > +{ > + u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate; > + u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000; > + u32 tmp = (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_RXT_SHFT) | > + (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT); > + u32 t_high, t_low; > + > + if (idev->bus_clk_rate <= 100000) { > + tmp &= ~ALTR_I2C_CTRL_BSPEED; > + /* Standard mode SCL 50/50 */ > + t_high = divisor * 1 / 2; > + t_low = divisor * 1 / 2; > + } else { > + tmp |= ALTR_I2C_CTRL_BSPEED; > + /* Fast mode SCL 33/66 */ > + t_high = divisor * 1 / 3; > + t_low = divisor * 2 / 3; > + } > + writel(tmp, idev->base + ALTR_I2C_CTRL); > + > + dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n", > + idev->bus_clk_rate, clk_mhz, divisor); > + > + /* Reset controller */ > + altr_i2c_reset(idev); > + > + /* SCL High Time */ > + writel(t_high, idev->base + ALTR_I2C_SCL_HIGH); > + /* SCL Low Time */ > + writel(t_low, idev->base + ALTR_I2C_SCL_LOW); > + /* SDA Hold Time, 300ns */ > + writel(div_u64(300 * clk_mhz, 1000), idev->base + ALTR_I2C_SDA_HOLD); > + > + /* Mask all master interrupt bits */ > + i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false); > +} > + > +static int i2c_m_rd(const struct i2c_msg *msg) > +{ > + return (msg->flags & I2C_M_RD) != 0; > +} > + > +/** > + * altr_i2c_transfer - On the last byte to be transmitted, send > + * a Stop bit on the last byte. > + */ > +static void altr_i2c_transfer(struct altr_i2c_dev *idev, u32 data) > +{ > + /* On the last byte to be transmitted, send STOP */ > + if (idev->msg_len == 1) > + data |= ALTR_I2C_TFR_CMD_STO; > + if (idev->msg_len > 0) > + writel(data, idev->base + ALTR_I2C_TFR_CMD); > +} > + > +/** > + * altr_i2c_empty_rx_fifo - Fetch data from RX FIFO until end of > + * transfer. Send a Stop bit on the last byte. > + */ > +static void altr_i2c_empty_rx_fifo(struct altr_i2c_dev *idev) > +{ > + size_t rx_fifo_avail = readl(idev->base + ALTR_I2C_RX_FIFO_LVL); > + int bytes_to_transfer = min(rx_fifo_avail, idev->msg_len); > + > + while (bytes_to_transfer-- > 0) { > + *idev->buf++ = readl(idev->base + ALTR_I2C_RX_DATA); > + idev->msg_len--; > + altr_i2c_transfer(idev, 0); > + } > +} > + > +/** > + * altr_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer. > + * @return: Number of bytes left to transfer. > + */ > +static int altr_i2c_fill_tx_fifo(struct altr_i2c_dev *idev) > +{ > + size_t tx_fifo_avail = idev->fifo_size - readl(idev->base + > + ALTR_I2C_TC_FIFO_LVL); > + int bytes_to_transfer = min(tx_fifo_avail, idev->msg_len); > + int ret = idev->msg_len - bytes_to_transfer; > + > + while (bytes_to_transfer-- > 0) { > + altr_i2c_transfer(idev, *idev->buf++); > + idev->msg_len--; > + } > + > + return ret; > +} > + > +static irqreturn_t altr_i2c_isr(int irq, void *_dev) > +{ > + int ret, read; > + struct altr_i2c_dev *idev = _dev; > + /* Read IRQ status but only interested in Enabled IRQs. */ > + u32 status = readl(idev->base + ALTR_I2C_ISR) & idev->isr_mask; > + > + if (!idev->msg) { > + dev_warn(idev->dev, "unexpected interrupt\n"); > + goto out; > + } > + read = i2c_m_rd(idev->msg); > + > + /* handle Lost Arbitration */ > + if (unlikely(status & ALTR_I2C_ISR_ARB)) { > + dev_err(idev->dev, "%s: arbitration lost\n", __func__); > + i2c_int_clear(idev, ALTR_I2C_ISR_ARB); > + idev->msg_err = -EAGAIN; > + goto complete; > + } > + > + if (unlikely(status & ALTR_I2C_ISR_NACK)) { > + dev_dbg(idev->dev, "%s: could not get ACK\n", __func__); > + idev->msg_err = -ENXIO; > + i2c_int_clear(idev, ALTR_I2C_ISR_NACK); > + altr_i2c_stop(idev); > + goto complete; > + } > + > + /* handle RX FIFO Overflow */ > + if (read && unlikely(status & ALTR_I2C_ISR_RXOF)) { > + altr_i2c_empty_rx_fifo(idev); > + i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY); > + altr_i2c_stop(idev); > + dev_err(idev->dev, "%s: RX FIFO Overflow\n", __func__); > + goto complete; > + } > + > + /* RX FIFO needs service? */ > + if (read && (status & ALTR_I2C_ISR_RXRDY)) { > + altr_i2c_empty_rx_fifo(idev); > + i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY); > + if (!idev->msg_len) > + goto complete; > + > + goto out; > + } > + > + /* TX FIFO needs service? */ > + if (!read && (status & ALTR_I2C_ISR_TXRDY)) { > + i2c_int_clear(idev, ALTR_I2C_ISR_TXRDY); > + if (!altr_i2c_fill_tx_fifo(idev)) > + goto complete; > + > + goto out; > + } > + > +complete: > + /* Wait for the Core to finish */ > + ret = readl_poll_timeout_atomic(idev->base + ALTR_I2C_STATUS, status, > + ((status & ALTR_I2C_STAT_CORE) == 0), > + 1, ALTR_I2C_TIMEOUT); > + if (ret) > + dev_err(idev->dev, "%s: message timeout\n", __func__); > + i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false); > + i2c_int_clear(idev, ALTR_I2C_ALL_IRQ); > + complete(&idev->msg_complete); > + dev_dbg(idev->dev, "%s: Message Complete\n", __func__); > + > +out: > + return IRQ_HANDLED; > +} > + > +static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg) > +{ > + u32 imask = ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | ALTR_I2C_ISR_NACK; > + unsigned long time_left; > + u32 value; > + u8 addr = i2c_8bit_addr_from_msg(msg); > + > + idev->msg = msg; > + idev->msg_len = msg->len; > + idev->buf = msg->buf; > + idev->msg_err = 0; > + reinit_completion(&idev->msg_complete); > + altr_i2c_core_enable(idev); > + > + /* Make sure RX FIFO is empty */ > + do { > + readl(idev->base + ALTR_I2C_RX_DATA); > + } while (readl(idev->base + ALTR_I2C_RX_FIFO_LVL)); > + > + writel(ALTR_I2C_TFR_CMD_STA | addr, idev->base + ALTR_I2C_TFR_CMD); > + > + if (i2c_m_rd(msg)) { > + imask |= ALTR_I2C_ISER_RXOF_EN | ALTR_I2C_ISER_RXRDY_EN; > + i2c_int_enable(idev, imask, true); > + /* write the first byte to start the RX */ > + altr_i2c_transfer(idev, 0); > + } else { > + imask |= ALTR_I2C_ISR_TXRDY; > + i2c_int_enable(idev, imask, true); > + altr_i2c_fill_tx_fifo(idev); > + } > + > + time_left = wait_for_completion_timeout(&idev->msg_complete, > + ALTR_I2C_XFER_TIMEOUT); > + i2c_int_enable(idev, imask, false); > + > + value = readl(idev->base + ALTR_I2C_STATUS) & ALTR_I2C_STAT_CORE; > + if (value) > + dev_err(idev->dev, "%s: Core Status not IDLE...\n", __func__); > + > + if (time_left == 0) { > + idev->msg_err = -ETIMEDOUT; > + dev_err(idev->dev, "%s: Transaction timed out.\n", __func__); > + altr_i2c_recover(idev); > + } > + > + if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO) > + altr_i2c_init(idev); > + > + altr_i2c_core_disable(idev); > + > + return idev->msg_err; > +} > + > +static int > +altr_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) > +{ > + struct altr_i2c_dev *idev = i2c_get_adapdata(adap); > + int i, ret; > + > + for (i = 0; i < num; i++) { > + ret = altr_i2c_xfer_msg(idev, msgs++); > + if (ret) > + return ret; > + } > + return num; > +} > + > +static u32 altr_i2c_func(struct i2c_adapter *adap) > +{ > + return I2C_FUNC_I2C; > +} > + > +static const struct i2c_algorithm altr_i2c_algo = { > + .master_xfer = altr_i2c_xfer, > + .functionality = altr_i2c_func, > +}; > + > +static int altr_i2c_probe(struct platform_device *pdev) > +{ > + struct altr_i2c_dev *idev = NULL; > + struct resource *res; > + int irq, ret; > + u32 val; > + > + idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL); > + if (!idev) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + idev->base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(idev->base)) > + return PTR_ERR(idev->base); > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) { > + dev_err(&pdev->dev, "missing interrupt resource\n"); > + return irq; > + } > + > + idev->i2c_clk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(idev->i2c_clk)) { > + dev_err(&pdev->dev, "missing clock\n"); > + return PTR_ERR(idev->i2c_clk); > + } > + > + idev->dev = &pdev->dev; > + init_completion(&idev->msg_complete); > + > + val = device_property_read_u32(idev->dev, "fifo-size", > + &idev->fifo_size); > + if (val) { > + dev_err(&pdev->dev, "FIFO size set to default of %d\n", > + ALTR_I2C_DFLT_FIFO_SZ); > + idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ; > + } > + > + val = device_property_read_u32(idev->dev, "clock-frequency", > + &idev->bus_clk_rate); > + if (val) { > + dev_err(&pdev->dev, "Default to 100kHz\n"); > + idev->bus_clk_rate = 100000; /* default clock rate */ > + } > + > + if (idev->bus_clk_rate > 400000) { > + dev_err(&pdev->dev, "invalid clock-frequency %d\n", > + idev->bus_clk_rate); > + return -EINVAL; > + } > + > + ret = devm_request_irq(&pdev->dev, irq, altr_i2c_isr, 0, > + pdev->name, idev); > + if (ret) { > + dev_err(&pdev->dev, "failed to claim IRQ %d\n", irq); > + return ret; > + } > + > + ret = clk_prepare_enable(idev->i2c_clk); > + if (ret) { > + dev_err(&pdev->dev, "failed to enable clock\n"); > + return ret; > + } > + > + altr_i2c_init(idev); > + > + i2c_set_adapdata(&idev->adapter, idev); > + strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name)); > + idev->adapter.owner = THIS_MODULE; > + idev->adapter.algo = &altr_i2c_algo; > + idev->adapter.dev.parent = &pdev->dev; > + idev->adapter.dev.of_node = pdev->dev.of_node; > + > + platform_set_drvdata(pdev, idev); > + > + ret = i2c_add_adapter(&idev->adapter); > + if (ret) { > + clk_disable_unprepare(idev->i2c_clk); > + return ret; > + } > + dev_info(&pdev->dev, "Altera SoftIP I2C Probe Complete\n"); > + > + return 0; > +} > + > +static int altr_i2c_remove(struct platform_device *pdev) > +{ > + struct altr_i2c_dev *idev = platform_get_drvdata(pdev); > + > + clk_disable_unprepare(idev->i2c_clk); > + i2c_del_adapter(&idev->adapter); > + > + return 0; > +} > + > +/* Match table for of_platform binding */ > +static const struct of_device_id altr_i2c_of_match[] = { > + { .compatible = "altr,softip-i2c-v1.0" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, altr_i2c_of_match); > + > +static struct platform_driver altr_i2c_driver = { > + .probe = altr_i2c_probe, > + .remove = altr_i2c_remove, > + .driver = { > + .name = "altera-i2c", > + .of_match_table = altr_i2c_of_match, > + }, > +}; > + > +module_platform_driver(altr_i2c_driver); > + > +MODULE_DESCRIPTION("Altera Soft IP I2C bus driver"); > +MODULE_AUTHOR("Thor Thayer "); > +MODULE_LICENSE("GPL v2"); > -- > 2.7.4 > -- With Best Regards, Andy Shevchenko